* [Workspaces] fix defaulticon.ico, move it to the Assets directory
* Move assets to single source of truth. Installer logic
---------
Co-authored-by: Stefan Markovic <stefan@janeasystems.com>
This pull request rewrites the entire Azure DevOps build system.
The guiding principles behind this rewrite are:
- No pipeline definitions should contain steps (or tasks) directly.
- All jobs should be in template files.
- Any set of steps that is reused across multiple jobs must be in
template files.
- All artifact names can be customized (via a property called
`artifactStem` on all templates that produce or consume artifacts).
- No compilation happens outside of the "Build" phase, to consolidate
the production and indexing of PDBs.
- All step and job templates are named with `step` or `job` _first_,
which disambiguates them in the templates directory.
- Most jobs can be run on different `pool`s, so that we can put
expensive jobs on expensive build agents and cheap jobs on cheap
build agents. Some jobs handle pool selection on their own, however.
Our original build pipelines used the `VSBuild` task _all over the
place._ This resulted in PowerToys being built in myriad ways, different
for every pipeline. There was an attempt at standardization early on,
where `ci.yml` consumed jobs and steps templates... but when
`release.yml` was added, all of that went out the window.
It's the same story as Terminal (https://github.com/microsoft/terminal/pull/15808).
The new pipelines are consistent and focus on a small, well-defined set
of jobs:
- `job-build-project`
- This is the big one!
- Takes a list of build configurations and platforms.
- Produces an artifact named `build-PLATFORM-CONFIG` for the entire
matrix of possibilities.
- Builds all of the installers.
- Optionally signs the output (all of the output).
- Admittedly has a lot going on.
- `job-test-project`
- Takes **one** build config and **one** platform.
- Consumes `build-PLATFORM-CONFIG`
- Selects its own pools (hardcoded) because it knows about
architectures and must choose the right agent arch.
- Runs tests (directly on the build agent).
- `job-publish-symbols-using-symbolrequestprod-api`
- Consumes `**/*.pdb` from all prior build phases.
- Uploads all PDBs in one artifact to Azure DevOps
- Uses Microsoft's internal symbol publication REST API to submit
stripped symbols to MSDL for public consumption.
Finally, this pull request has some additional benefits:
- Symbols are published to the private and public feeds at the same
time, in the same step. They should be available in the public symbol
server for public folks to debug against!
- We have all the underpinnings necessary to run tests on ARM64 build
agents.
- Right now, `ScreenResolutionUtility` is broken
- I had to introduce a custom version of `UseDotNet` which would
install the right architecture (🤦); see https://github.com/microsoft/azure-pipelines-tasks/issues/20300.
- All dotnet and nuget versioning is consolidated into a small set of
step templates.
- This will provide a great place for us to handle versioning changes
later, since all versioning happens in one place.
There is no reason to use Invoke-Expression to execute a string
containing a path to another powershell script. You can just run the
powershell script directly.
But then if you're going to do that, why not make it all part of the
same script and use functions?
* spell checker
* Adding OOBE Projects page
* changed the default hotkey
* module interface
* rename projects editor
* bug report tool
* installer
* gpo
* exit event constant
* extend search for projects by search over the containing apps' names
* [Projects] fix grammatical issue #43 (1 app - many apps)
* [Projects] Editor: Main page: fix layout if there are many apps, launch button not disappearing on the right side
* dsc
* github
* pipeline
* guid prefix
* [Projects] fixing general settings gpo handling in runner + minor changes
* arm build fix
* Do not allow saving project if name or applist is empty. Also minor UI changes
* version
* editor version
* spellcheck
* editor dll signing
* update projects names to filter them out
* shortcut saving fix
* [Projects] Editor: brining the highlighted app's icon into the foreground. + minor UI fixes
* spell checker
* spellcheck
* [Projects] re-implementing icon size calculation to have similar sized icons for every app.
* [projects] Adding info message for cases: there are no projects or no results for the search
* [Projects] Adding Edit button to the popup. + minor changes
* [Projects] Making popup having rounded corners
* changed "no projects" text color and position
* remove opening the first proj
* fix placing windows of the same app in the project
* [Projects] bringing back the breadcrumb on the editor page. Make it clickable.
* [Projects] optimizing click handlers
* [Projects] Removing not selected apps on save
* moved on thread executor to common
* moved display utils
* added convert rect
* unsigned monitor number
* set awareness
* app placement
* [Projects] Re-implementing preview drawing - one common image
* [Projects] fix boundary calculation, use DPI aware values
* fix launching with command line args
* Fix ARM64 CI build
* launch packaged apps using names when possible
* spell-check
* update packaged apps path
* projects editor single instance
* [Projects] Add Select all checkbox, Delete selected button
* Add Checkbox for per monitor selection
* modifying highlight in preview
* spell checker
* logs
* exclude help windows
https://github.com/JaneaSystems/PowerToys-DevProjects/issues/49
* Add intermediate step to project creation
* minor bugfix
* mutex fix
* modifying highlight for minimized apps
* Fixing bug: re-draw the preview on app deletion in the editor
* Adding helper class for getting the right bounds for screens
* spell checker
* spell checker
* Minor fixes in the capture dialog
* get dpi unaware screen bounds
* refactoring: added utils
* changed window filter
https://github.com/JaneaSystems/PowerToys-DevProjects/issues/2
* clean up
* refactoring
* projects common lib
* localizable default project prefix
* launcher resources
* clean up
* change snapshot project saving
https://github.com/JaneaSystems/PowerToys-DevProjects/issues/14
* changed project data
https://github.com/JaneaSystems/PowerToys-DevProjects/issues/14
* changed project creation save-cancel handles
https://github.com/JaneaSystems/PowerToys-DevProjects/issues/14
* spell-check
* Remove checkboxes, delete feature
* remove unused from the project
* get command line args in the snapshot
* minimized settings snap fix
* set window property after launching
* FZ: ignore projects launched windows
* Implementing major new features: remove button, position manipulation, arguments, admin, minimized, maximized
* modifying colors
* launcher project filters
* clean up
* Hide Admin checkbox
* hide WIP
* spell-check
* Revert "Hide Admin checkbox"
This reverts commit 3036df9d7f.
* get app elevated property
* Implementing Launch and Edit feature
* fixing: update of listed projects on the main page after hitting save in editor
* Fix for packaged app's icons
* fixing scroll speed issue
* change scroll speed to 15
* launch elevated apps
* minor fixes
* minor fix
* enhancing shortcut handling
* can-launch-elevated check
* projects module interface telemetry
* Implementing store of setting "order by".
* minor string correction
* moved projects data parsing
* telemetry
* add move apps checkbox
* notification about elevated apps
* restart unelevated
* move existing windows
* keep opened windows at the same positions
* handle powertoys settings
* use common theme
* fix corrupted data: project id and monitor id
* project launch on "launch and edit"
* clean up
* show screen numbers instead of monitor names
* launcher error messages
* fix default shortcut
* Adding launch button to projects settings, dashboard and flyout
* Adding new app which is launched when launching a project. It shows the status of the launch process
* spell checker
* Renaming Projects to App Layouts. Replacing only string values, not the variable names
* Re-ordering modules after Renaming Projects + spell checker
* setting window size according to the screen (making it bigger)
* commenting out feature "move apps if exist"
* spell checker
* Add ProjectsLauncherUI to signing
* opening apps in minimized state which are placed on a monitor, which is not found at the moment of launching
* consistent file name
* removed unused sln
* telemetry: create event
* WindowPosition comparison
* telemetry: edit event
* fix muted Launch as admin checkbox
* telemetry: delete event
* updated Edit telemetry event
* added invoke point to launcher args
* added utils
* parse invoke point
* replaced tuple with struct
* telemetry: launch event
* MonitorRect comparison
* resources
* rename: folders
* remove outdated
* rename: window property
* rename: files and folders
* rename: common data structures
* rename: telemetry namespace
* rename: workspaces data
* rename ProjectsLib -> WorkspacesLib
* rename: gpo
* rename: settings
* rename: launcher UI
* rename: other
* rename: pt run
* rename: fz
* rename: module interface
* rename: icon
* rename: snapshot tool
* rename: editor
* rename: common files
* rename: launcher
* rename: editor resources
* fix empty file crash
* rename: json
* rename: module interface
* fix custom actions build
* added launch editor event constant
* xaml formatting
* Add missing method defition to interop::Constants idl
Remove Any CPU config
* more .sln cleanup
* [Run][PowerToys] Fix Workspaces utility (#34336)
polished workspaces utility
* build fix - align CppWinRT version
* address PR comment: fix isdigit
* indentation
* address PR comment: rename function
* address PR comment: changed version for workspaces and revision
* added supported version definition
* addressPR comment: use BringToForeground
* address PR comments: updated projects
* address PR comment: uncomment gpo in settings
* address PR comment: rename oobe view
* update OOBE image with current module name
* moved AppUtils
* launching with AppUserModel.ID
* fixed module order in settings
* fix xaml formatting
* [Workspaces] Close launcher if there are failed launches. Plus adding new spinner gif
* fix topmost LauncherUI
* clean up
* UI closing
* BugReportTool - omit cmd arg data
* Delete icon on workspace removal
* Adding cancellation to launcher UI.
* reordered launching
* fix terminating UI
* Removing old shortcut on workspace renaming
* Sentence case labels
* get process path without waiting
* comment out unused
* remove unused argument
* logs
* New icon
* fix launch and edit for the new project
* fix launch and edit: save new project
* Update exe icons
---------
Co-authored-by: donlaci <laszlo@janeasystems.com>
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
Co-authored-by: Stefan Markovic <stefan@janeasystems.com>
Co-authored-by: Davide Giacometti <davide.giacometti@outlook.it>
Co-authored-by: Niels Laute <niels.laute@live.nl>
## Summary of the Pull Request
Removes all C++/CX code, replacing it with C++/WinRT.
## Detailed Description of the Pull Request / Additional comments
Removes all C++/CX code.
Renames interop namespaces to be better consumed by CsWinRT.
Standardizes all projects on net8.0-windows10.0.20348.0, which is a
requirement for C++/WinRT usage.
FileLocksmithLibInterop brought to stdcpplatest and static analysis
errors were corrected.
Removed now unneeded string conversion code from
FileLocksmithLibInterop.
Changed interop KeyboardHook to use a single hook across all instances.
Required because on C++/WinRT we don't have the .NET runtime to bind a
object instance to a delegate and be able to pass it to a C function
pointer argument (still no idea why this worked correctly on C++/CX to
be honest). This change actually makes us create less low level keyboard
hooks.
Changed some code that depended on arrays since WinRT/C++ returns null
instead of an empty array through the interface.
## Validation Steps Performed
Built and tested runtime.
<!-- Enter a brief description/summary of your PR here. What does it
fix/what does it change/how was it tested (even manually, if necessary)?
-->
## Summary of the Pull Request
In prep for WinAppSdk, trying to consolidate items. Version.prop is one
of the first items.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
- [ ] **Closes:** #xxx
- [ ] **Communication:** I've discussed this with core contributors
already. If work hasn't been agreed, this work might be rejected
- [ ] **Tests:** Added/updated and all pass
- [ ] **Localization:** All end user facing strings can be localized
- [ ] **Dev docs:** Added/updated
- [ ] **New binaries:** Added on the required places
- [ ] [JSON for
signing](https://github.com/microsoft/PowerToys/blob/main/.pipelines/ESRPSigning_core.json)
for new binaries
- [ ] [WXS for
installer](https://github.com/microsoft/PowerToys/blob/main/installer/PowerToysSetup/Product.wxs)
for new binaries and localization folder
- [ ] [YML for CI
pipeline](https://github.com/microsoft/PowerToys/blob/main/.pipelines/ci/templates/build-powertoys-steps.yml)
for new test projects
- [ ] [YML for signed
pipeline](https://github.com/microsoft/PowerToys/blob/main/.pipelines/release.yml)
- [ ] **Documentation updated:** If checked, please file a pull request
on [our docs
repo](https://github.com/MicrosoftDocs/windows-uwp/tree/docs/hub/powertoys)
and link it here: #xxx
<!-- Provide a more detailed description of the PR, other things fixed
or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests
wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
---------
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
## Summary of the Pull Request
This PR aims for fix some CI build warnings.
## Detailed Description of the Pull Request / Additional comments
### Warning NU1503
Fix warning NU1503 for wix toolset projects marking them as restorable
and adding an empty restore target.
### No test result files matching '[ '**/*.trx' ]' were found.
Skip publishing of test results for ARM64 since pipeline isn't running
ARM64 tests
* Update gitignore.js
* Update gitignore.js
* Add custom color for negations
* Add custom color for negations
* Regex refactoring
* Regex refactoring again
* Move customTokenColors to a separate file
* Move customTokenColors to a separate file
* Update devdocs
* Use kebab case for token names
* Update negation color
* Update index.html formatting
* [ARM][Installer] Fix UninstallCommandNotFoundModule
On ARM, processes does not inherit the user env variables. So, pwsh.exe could not be found from installer process.
Logic is changed to use powershell.exe to first set process' PATH env var and then trigger pwsh.exe
* address PR comments
* Better fix for installation issues when My Documents on network drive
* Fix spellcheck
* Improved wxs comment
* Created DSCModule folder in install folder; removed DSC modules from resources
* Added back newline
* [CommandNotFound] Add support for upgrading the module
* upgrade module as a part of upgrade installation; actually set content in EnableModule.ps1
* Fix XAML style to pass CI
* Remove CmdNotFound project from sln as well
* Remove CmdNotFound psd1 file from installer
* More installer fixes
* UpgradeCommandNotFound runs after InstallFiles
* Fix NOTICE.md
* Fix custom action condition
* Pass install folder to the custom action
* Upgrade-Module --> Update-Module
* actually install the module
* spell
* verify updated scripts work; make necessary changes
---------
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
* [DSC] Microsoft.PowerToys.Configure module + winget configuration file support
* f: fix for an incorrect directory id reference
* f: update comment
* f: address review comments
* f: file locksmith bug fix
* f: add explorer preview switches in samples
* f: remove debug
* Sign DSC files
* f: implement docs/samples generator
* [ci]Sign FancyZonesEditorCommon.dll
* Sign DSC files in the Generated folder
* f: address review comments
* f: update usable options
* f: add autogenerated sample
* [Installer] Don't use same GUID for different components
* [Installer]Don't remove folders shared by other modules
* Allow configuring PTRun MaximumNumberOfResults
* Remove all settings DSC sample. Just random data
* Allow configuring Hosts Run as Administrator
* Revert "[Installer]Don't remove folders shared by other modules"
This reverts commit 6da3d6cfd5.
* Add all PTRun plugins and Global and keyboard to DSC sample
* Fix issues with context menu modules not disabling
* Fix default enabled values when setting with DSC
* Fix tests regarding default modules in Settings
* Fix merge error
* Restart PowerToys process if we stopped it
---------
Co-authored-by: Andrey Nekrasov <1828123+yuyoyuppe@users.noreply.github.com>
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
* Attempt at upgrading, getting failure on two tests
* including workaround for 1.5
* Fixing naming
* adding in settings as well
* shifting to my older solution
* doing variation of the command
* Create folder for map.html hack if it's not there
* Fix NOTICE.md
* Fix Navigation Footer items crashing the Settings app
* Upgrade WinAppSDK to 1.5.1
* Revert "Fix Navigation Footer items crashing the Settings app"
This reverts commit 6ca19a53bb.
* Remove map.html hack
* EOL nit
* Add map.html to installer
---------
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
* [Deps]Update CppWinRT to 2.0.240111.5
* Apply fix for robmikh.common incompatibility with cppwinrt
* Add CppWinRT to projects that were missing it
* Fix spellcheck
* Upgraded projects to target .NET 8
* Updated .NET runtime package targets to use latest .NET 8 build
* Updated PowerToys Interop to target .NET 8
* Switch to use ArgumentNullException.ThrowIfNull
* ArgumentNullException.ThrowIfNull for CropAndLockViewModel
* Switching to ObjectDisposedException.ThrowIf
* Upgrade System.ComponentModel.Composition to 8.0
* ArgumentNullException.ThrowIfNull in Helper
* Switch to StartsWith using StringComparison.Ordinal
* Disabled CA1859, CA1716, SYSLIB1096 analyzers
* Update RIDs to reflect breaking changes in .NET 8
* Updated Microsoft NuGet packages to RC1
* Updated Analyzer package to latest .NET 8 preview package
* CA1854: Use TryGetValue instead of ContainsKey
* [Build] Update TFM to .NET 8 for publish profiles
* [Analyzers] Remove CA1309, CA1860-CA1865, CA1869, CA2208 from warning.
* [Analyzers] Fix for C26495
* [Analyzers] Disable CS1615, CS9191
* [CI] Target .NET 8 in YAML
* [CI] Add .NET preview version flag temporarily.
* [FileLocksmith] Update TFM to .NET 8
* [CI] Switch to preview agent
* [CI] Update NOTICE.md
* [CI] Update Release to target .NET 8 and use Preview agent
* [Analyzers] Disable CA1854
* Fix typo
* Updated Microsoft.CodeAnalysis.NetAnalyzers to latest preview
Updated packages to rc2
* [Analyzers][CPP] Turn off warning for 5271
* [Analyzers][CPP] Turn off warning for 26493
* [KeyboardListener] Add mutex include to resolve error
* [PT Run][Folder] Use static SearchValues to resolve CA1870
* [PowerLauncher] Fix TryGetValue
* [MouseJumpSettings] Use ArgumentNullException.ThrowIfNull
* [Build] Disable parallel dotnet tool restore
* [Build] No cache of dotnet tool packages
* [Build] Temporarily move .NET 8 SDK task before XAML formatting
* [Build][Temp] Try using .NET 7 prior to XAML formatting and then switch to .NET 8 after
* [Build] Use .NET 6 for XAML Styler
* [CI] Updated NOTICE.md
* [FancyZones] Update TFM to .NET 8
* [EnvVar] Update TFM to .NET 8 and update RID
* [EnvVar] Use ArgumentNullException.ThrowIfNull
* [Dev] Updated packages to .NET 8 RTM version
* [Dev] Updated Microsoft.CodeAnalysis.NetAnalyzers to latest
* [CI] Updated NOTICE.md with latest package versions
* Fix new utility target fameworks and runtimeids
* Don't use preview images anymore
* [CI] Add script to update VCToolsVersion environment variable
* [CI] Add Step to Verify VCToolsVersion
* [CI] Use latest flag for vswhere to set proper VCToolsVersion
* Add VCToolsVersion checking to release.yml
* Remove net publishing from local/ PR CI builds
* Revert "Remove net publishing from local/ PR CI builds"
This reverts commit f469778996.
* Only publish necessary projects
* Add verbosity to release pipelines builds of PowerTOys
* Set VCToolsVersion for publish.cmd when called from installer
* [Installer] Moved project publish logic to MSBuild Task
* [CI] Revert using publish.cmd
* [CI] Set VCToolsVersion and unset ClearDevCommandPromptEnvVars property
* Installer publishes for x64 too
* Revert "Add verbosity to release pipelines builds of PowerTOys"
This reverts commit 654d4a7f78.
* [Dev] Update CodeAnalysis library to non-preview package
* Remove unneeded warning removal
* Fix Notice.md
* Rename VCToolsVersion file and task name
* Remove unneeded mutex header include
---------
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
* Fix dark title bar for shortcuts window
* Adjust editor sizes
* Fetch accent button style from resources instead
* Modernize the editor UI
Reimplemented the XAML bridge to support Mica
* Use fluent icons
* Modernize the preview key visuals
* Implement teaching tips for key drop-down messages
* Fix spelling
* Fix delete button alignment in keys editor
* Remove trace log from bridge message handler
* Add WinUI depends to installer script
* Hide icon and caption from editor title bar
* Update remap entries to look like cards
* Use built-in content dialog buttons
* Update add button
* Fix spelling
* Fix installer script for ARM64
* Fix spelling AGAIN
* Update dev documentation
* Prevent white flash on dark mode
* Revert 3-key layout but make window wider
* f: align webview versions
* f: add pipeline exceptions for Microsoft DLLs that are not versioned
* f: add vcruntime140_1_app.dll to the exception list
* f: update webview versions
* Init EnvironmentVariables UI project
* Models
TitleBar
MainPage init
Icon
* User and system variables
* Profiles init
* XAML cleanup
* Missing ItemTemplate
* EditDialog
* ModuleInterface
* Signing and processes lists
* Installer
* spellcheck
* Fix ARM64 build and consolidate packages
* spellcheck2
* Fix installer
* Single instance. C# telemetry. Wait on PT pid
* ElevationHelper
* Add profile wip
* Init EnvironmentVariables UI project
* Models
TitleBar
MainPage init
Icon
* User and system variables
* Profiles init
* XAML cleanup
* Missing ItemTemplate
* EditDialog
* ModuleInterface
* Signing and processes lists
* Installer
* spellcheck
* Fix ARM64 build and consolidate packages
* spellcheck2
* Fix installer
* Single instance. C# telemetry. Wait on PT pid
* ElevationHelper
* Add profile wip
* show run as administrator in title (#28516)
* Environment Variables added to Run plugin (#28466)
* UI tweaks
* Remove style
* Add profile - init working
* Applied variables
* Read/Write profiles
* Fixes
* Add separator and fix loading profiles
* Only allow to edit System vars if running elevated
* Add tmp progress ring to show applying changes progress
Ignore not needed json fields
* Remove variable and profile logic
* Do not read data async
Update System and User variables on change
* Add isCorrectlyApplied()
* Sort variables in Applied variables
* WIP WndProc
* spellcheck
* Revert "WIP WndProc"
This reverts commit 0c0b6c67de.
* WHY CRASH???
* UI tweaks
* WIP modified state warning
* Add cancel button in dialogs
* Add buttons validations
* Set variables - fire and forget notify
* Revert "Revert "WIP WndProc""
This reverts commit 1b2306eeb7.
* Listen to WM_SETTINGSCHANGED
Add Infobar reload button
* spellcheck
* spellcheck again
* Fix build
* InfoBar runAsAdmin visibility
* Fix comment
* Confirm dialog when deleting variable
Fix add variable button when creating profile
* Edit profile
* Sort variables on Load
* Select existing variables on edit
* Add default variable
* Fix adding existing vars to profile
* update notice.md
* Handle PATH properly
* Add tooltips and fix dialogs text wrapping
* Fix applied values for duplicates
Fix add/eddit variable txt box validation
* Add horizontal scroll bar for applied values
* Fix duplicate variables handling
Fix user variable handling and preview
* spellcheck
* Try fix spellcheck
* Revert "spellcheck"
This reverts commit ee76231974.
* Revert "Try fix spellcheck"
This reverts commit dc8f04afb9.
* Fix path and duplicates conflict
* Fix PATH handling
Fix unapply on delete active variable
Fix ordering in applied variables
* Show variables as lists and add drag-to-reorder feature
* Only show specific variables as list
Update list in edit dialog on editing the value
* spellcheck
* Update GPO policy
* Add Edit and Remove variable buttons
Remove context menu
* Remove drag&drop when editing list variable and add buttons to move up/down
* Fix Edit profile dialog title
* Fix backup and restore variables when editing variable from applied profile
* Apply var to system WIP
* Tweaks
* Simplify edit variable logic
* Minor fixes
* Spellcheck
* Update src/modules/EnvironmentVariables/EnvironmentVariables/app.manifest
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
* spellcheck 2
* Remove unneeded string
* Add more telemetry
* Do not allow adding existing variables with the same name into the profile
* Adding icon
* Fix the crash when opening existing variables dialog
* Update Settings and OOBE screenshots
* Fix crash when malformed profiles.json and jsonignore not needed properties
* Fix selecting duplicates in existing variables dialog
* Add user variable name limit (<255 chars)
Check if profile is applicable on apply
Show message if profile is not applicable
* XamlStyling
* Better Flyout positioning
Add Cancel button to the flyout
* Fix UI glitches by using ItemsControl (no virtualization)
* Fix spellcheck
* Fix XAML style
* Add horizontal scrollbar to applied variables
* Revert to ItemsRepeater
* Fix UI glitches by adding a decent minimum cache
* Fixing UI bugs
* Fix spellcheck
* Fix crash while trying to edit a User variable when there's no Parent
profile
* Fix issue overwriting backup var when you edit var on applied profile
* Fix nuking of variables when adding to applied profile
* Fix profile not being saved when deleting a variable
* Fix ValuesList empty crash, issues and no serialization
* fix spellcheck
* Allow in-line edit of list variables
* Fix xaml style
* Fix add profile variable cancel button logic
* Fix add profile variable cancel button logic - clean the list
* Bump VerticalCacheLength to 10
as in some cases UI glitch on expanding System variables was still present
* Fix profile Add variable button enable/disable logic
* Remove unneeded using
* Add to Dashboard
---------
Co-authored-by: Niels Laute <niels.laute@live.nl>
Co-authored-by: Davide Giacometti <davide.giacometti@outlook.it>
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
* Update to WASDK 1.4
* Remove redundant title bar styles.
* Update notice
* Update C++ projects as well
* Upgrade CppWinRT too
* Add exception to WASDK file version set to 1.0.0.0
---------
Co-authored-by: Jaime Bernardo <jaime@janeasystems.com>
* [CropAndLock]Original POC code dump
* Project rename and delete solution
* Remove unused architectures
* Update cppwinrt to be in line with the solution
* Add to PowerToys solution and fix build errors
* Initial module interface empty project
* Module skeleton based on AlwaysOnTop
* Add loggers to module interface
* Add crop and lock to the runner
* Enable starts and disable kills the process
* Events reacting to hotkeys
* Main application reacting to events
* Initialize unhandled exception handling
* Singleton in line with other projects
* Also exit when PowerToys exit is detected
* Create Settings page
* React to shortcut changes in Settings
* Disable Crop and Lock through an Event
* Disable running Crop and Lock standalone
* Remove Crop and Lock tray icon
* Module Interface dll version
* Fix main app resource file to include version
* Make pch conditional on CI build
* Add to signing
* Remove settings screen opened by removed tray icon
* Fix spellcheck
* Yet another fix for spellcheck
* Fix disabling utility
* Fix solution build configurations
* Fix C++ analyzer errors
* Try to fix pre-compiled header CI errors
* Fix crash while exiting with an active reparent window
* Fix missing reference when building in release CI
* Add OOBE page
* GPO: Add admx and adml file changes
* GPO: react to changes in GPO
* Add quick access flyout menu entry
* Use Crop And Lock icon
* Use actual images for Settings and OOBE
* Module and app telemetry
* Add entry to README.md
* Add to process lists
* Additional logging
* Attribution in Settings page
* Add attribution to Community.md
* Fix spellcheck
* Fix typo in strings
* Fix crash when window handle is no longer valid
* Update COMMUNITY.md
* Fix supportedOS in manifest
* Don't show msgbox if detecting second instance
* Remove unused hotkey
* Tweak attribution
* Fix attribution spellcheck
* Flatten everything and succeed build
* Figure out Settings assets
* Remove UseCommonOutputDirectory tag
* Proper settings app path
* [VCM] Fix assets location
* Fix some runtime paths
* [RegistryPreview]Use MRTCore specific pri file
* [Hosts]Use MRTCore specific pri file
* [Settings]Use MRTCore specific pri file
* [Peek]Use MRTCore specific pri file
* [FileLocksmith]Use MRTCore specific pri file
* [ScreenRuler]Use MRTCore specific pri file
* [PowerRename]Use MRTCore specific pri file
* [Peek]Move assets to own folder
* [FileLocksmith] Use own Assets path
* [Hosts]Use own assets folder
* [PowerRename]Use own assets dir
* [MeasureTool] Use its own assets folder
* [ImageResizer]Use its own assets path
* Fix spellcheck
* Fix tab instead of space in project files
* Normalize target frameworks and platforms
* Remove WINRT_NO_MAKE_DETECTION flag. No longer needed?
* Fix AOT and Hosts locations
* Fix Dll version differences on dependency
* Add Common.UI.csproj as refernce to fix dll versions
* Update ControlzEx to normalize dll versions
* Update System.Management version to 7.0.2
* Add GPOWrapper to Registry Preview to fix dll versions
* [PTRun]Reference Microsoft.Extensions.Hosting to fix dll versions
* Fix remaining output paths / dll version conflicts
* [KeyboardManager]Executables still on their own directories
* Fix Monaco paths
* WinAppSDK apps get to play outside again
* Enable VCM settings again
* Fix KBM Editor path again
* [Monaco]Set to own Assets dir
* Fix installer preamble; Fix publish. remove unneeded publishes
* Remove Hardlink functions
* Installer builds again (still needs work to work)
* Readd Monaco to spellcheck excludes
* Fix spellcheck and call publish.cmd again
* [Installer] Remove components that don't need own dirs
* [Installer] Refactor Power Launcher
* [Installer] Refactor Color Picker
* [Installer] Refactor Monaco assets
* [Installer]Generate File script no longer needs to remove files
* [Installer]Refactor FileLocksmith
* [Installer] Refactor Hosts
* [Installer]Refactor Image Resizer
* [Installer]Refactor MouseUtils
* [Installer]Refactor MWB
* [Installer]Refactor MeasureTool
* [Installer]Refactor Peek
* [Installer]Refactor PowerRename and registry fixes
* [Installer]Refactor RegistryPreview
* [Installer]Refactor ShortcutGuide
* [Installer]Refactor Settings
* [Installer]Clean up some unused stuff
* [Installer]Clean up stuff for user install
* [Installer]Fix WinUi3Apps wxs
* [Installer]Fix misplaced folders
* [Installer]Move x86 VCM dll to right path
* Fix monaco language list location
* [Installer]Fix VCM directory reference
* [CI]Fix signing
* [Installer] Fix resources folder for release CI
* [ci]Looks like we still ship NLog on PowerToys Run
* [Settings]Add dependency to avoid dll collision with Experimentation
* [RegistryPreview]Move XAML files to own path
* [RegistryPreview]Fix app icon
* [Hosts]Move XAML files to their own path
* [FileLocksmith]Move XAML files to their own path
* [Peek]Move XAML files to own path
* [ScreenRuler]Move XAML files to its own path
* [Settings]Move XAML to its own path
* [ColorPicker]Move Resources to Assets
* [ShortcutGuide]Move svgs to own Assets path
* [Awake]Move images to assets path
* [Runner]Remove debug checks for PowerToys Run assets
* [PTRun]Move images to its own assets path
* [ImageResizer]Icon for context menu on own assets path
* [PowerRename]Move ico to its own path
* Remove unneeded intermediary directories
* Remove further int dirs
* Move tests to its own output path
* Fix spellcheck
* spellcheck: remove warnings
* [CppAnalyzers]Ignore rule in a tool
* [CI]Check if all deps.json files reference same versions
* fix spellcheck
* [ci]Fix task identation
* [ci]Add script to guard against asset conflicts
* [ci]Add more deps.json audit steps in the release build
* Add xbf to spellcheck expects
* Fix typo in asset conflict check scripts
* Fix some more dependency conflicts
* Downgrade CsWinRT to have the same dll version as sdk
* [ci]Do a recursive check for every deps.json
* Fix spellcheck error inside comment
* [ci]Fix asset script error
* [ci]Name deps.json verify tasks a bit better
* [ci]Improve deps json verify script output
* [ci]Update WinRT version to the same running in CI
* Also upgrade CsWinRT in NOTICE.MD
* [PowerRename]Move XAML files to own path
* [Common]Fix Settings executable path
* [ci]Verify there's no xbf files in app directories
* [installer]Fix firewall path
* [Monaco]Move new files to their proper assets path
* [Monaco]Fix paths for new files after merge
* [Feedback]Removed unneeded build conditions
* [Feedback]Clear vcxproj direct reference to frameworks
* [Feedback]RunPlugins name to hold PTRun plugins
* [Feedback]Remove unneeded foreach
* [Feedback]Shortcut Guide svgs with ** in project file
* [Feedback]Fix spellcheck
* Add hashing plugin for Run
* Cleanup logic for hasher plugin
- The IComputeRequest interface should make it easier to implement new
generators in the future
- The GUID generator can now generate all versions of GUID (a.k.a. UUID)
- The input for the hash functions is not quite right. The
Wox.Plugin.Query class doesn't actually have a way to ge the raw query
as given by the user. The issue is with multiple spaces. An input like
"a a a a a" would only be accessible as "a a a a a" using the
Query class.
So for now, hashing only works correctly if the input
doesn't contain multiple consecutive spaces.
- Need a way to make clear the usage for generating GUIDv3 and v5, since
they take 2 parameters. There are defaults, but they aren't very
clear.
* Change plugin name to ValueGenerator
* Clean up error handling for the input parser
* Add result type and description to subtitle
* Change the icons
* Add Base64 encoding and unit tests
This commit adds Base64 encoding as a utility of the value generator
plugin. The command is `# base64 ***input***`.
Also added unit tests for the UUID/GUID generator and for the input
parser. I don't think tests are necessary for the hashing functions
or for the base64 encoder, since those were part of the the system
libraries.
I'll open a PR for the documentation tomorrow and mark this draft
for review.
* Excluded UUIDv2
* Change icons
* Add RawUserQuery to Wox.Plugin.Query
Getting the RawUserQuery is necessary to be able to handle queries like
`# md5 a a`, where the intent is to get the hash for `a a`.
The existing `RawQuery` removes consecutive whitespaces and there was no
other way of getting the request as entered by the user.
* Add ValueGenerator plugin to installer
Also add the unit tests for the plugin to the pipeline.
* Small cleanup
* Fix spelling
* Fix spelling again
* Spell check for guiddata
* More fixes
This commit adds the dev docs explaining the classes in the new plugin.
It also fixes the following issues:
1. ValueGenerator was not a dependency for the PowerLauncher project
2. The error message for an invalid SHA variant now displays the
supported SHA variants
3. Hash requests now wait for a string to hash (i.e. no longer hash an
empty string)
4. GUID v3 and v5 namespace aliases allow lowercase notation
5. Unnecessary debug logs
6. An empty query will now just log "Empty request"
7. An invalid query will also log user query
* Spell check fix again
* Change error message for unsupported GUID versions
* Remove Any CPU from the solution
* Add to installer
* Remove duplicated ValueGeneratorPluginFolder entry
* Installer: add priority settings to the task scheduler PT task.
* Add priority settings for task creation (for Task Scheduler) to the runner as well
* Modifying priority value
