Replaced all 0201 parts except the 0.1u for 0402.

I did not change the 0.1u yet as we have 3 of them on the back side of
the board. They are decoupling caps so they should be as close as
possible to the power pins. So moving them to a spot that can accept a
higher part might be difficult. Although we could use 0402 that are
<0.33mm thick too. This would fit our budget and make assembly easier.
Thus I will make the change in a separate commit.
This commit is contained in:
Piotr Esden-Tempski 2018-09-02 21:51:44 -07:00
parent 07dd7e681c
commit 483ba0c896
2 changed files with 626 additions and 623 deletions

File diff suppressed because it is too large Load Diff

View File

@ -505,9 +505,9 @@ U 1 1 59A89285
P 9050 3250
F 0 "C5" H 9075 3350 50 0000 L CNN
F 1 "0.47uF" H 9075 3150 50 0000 L CNN
F 2 "Capacitor_SMD:C_0201_0603Metric" V 9350 3200 50 0000 C CNN
F 2 "Capacitor_SMD:C_0402_1005Metric" V 9350 3200 50 0000 C CNN
F 3 "" H 9050 3250 50 0000 C CNN
F 4 "cap-cer-0201-470n" H 0 0 50 0001 C CNN "Key"
F 4 "cap-cer-0402-470n" H 0 0 50 0001 C CNN "Key"
1 9050 3250
1 0 0 -1
$EndComp
@ -649,9 +649,9 @@ U 1 1 59D3F241
P 1400 1250
F 0 "C6" H 1425 1350 50 0000 L CNN
F 1 "19pF" H 1425 1150 50 0000 L CNN
F 2 "Capacitor_SMD:C_0201_0603Metric" H 2050 1800 50 0000 C CNN
F 2 "Capacitor_SMD:C_0402_1005Metric" H 2050 1800 50 0000 C CNN
F 3 "" H 1400 1250 50 0000 C CNN
F 4 "cap-cer-0201-19p" H 0 0 50 0001 C CNN "Key"
F 4 "cap-cer-0402-19p" H 0 0 50 0001 C CNN "Key"
1 1400 1250
1 0 0 -1
$EndComp
@ -661,9 +661,9 @@ U 1 1 59D3F397
P 2950 1250
F 0 "C7" H 2975 1350 50 0000 L CNN
F 1 "19pF" H 2975 1150 50 0000 L CNN
F 2 "Capacitor_SMD:C_0201_0603Metric" H 2050 1900 50 0000 C CNN
F 2 "Capacitor_SMD:C_0402_1005Metric" H 2050 1900 50 0000 C CNN
F 3 "" H 2950 1250 50 0000 C CNN
F 4 "cap-cer-0201-19p" H 0 0 50 0001 C CNN "Key"
F 4 "cap-cer-0402-19p" H 0 0 50 0001 C CNN "Key"
1 2950 1250
1 0 0 -1
$EndComp