Merge branch 'master' of git@github.com:travisgoodspeed/goodwatch.git into alarm

# Conflicts:
#	firmware/Makefile
#	firmware/apps/alarm.c
#	firmware/apps/alarm.h
#	firmware/rtc.c

firmware/Makefile

@@ -7,12 +7,12 @@ CC = msp430-gcc -mmcu=cc430f6137 -Wall -I. -Os
 
 BSL = ../bin/cc430-bsl.py -r 38400 -p $(PORT)
 
-modules=rtcasm.o main.o lcd.o lcdtext.o rtc.o  keypad.o apps.o applist.o buzzer.o \
+modules=rtcasm.o main.o lcd.o lcdtext.o rtc.o  keypad.o apps.o applist.o \
-	sidebutton.o power.o uart.o monitor.o ucs.o \
+	sidebutton.o power.o uart.o monitor.o ucs.o buzz.o \
 	radio.o packet.o dmesg.o codeplug.o rng.o \
 	libs/assembler.o libs/morse.o 
 
-apps= apps/clock.o apps/alarm.o apps/rpn.o apps/hex.o apps/stopwatch.o apps/dice.o \
+apps= apps/clock.o apps/rpn.o apps/hex.o apps/stopwatch.o apps/dice.o \
 	apps/rngapp.o apps/tuner.o apps/morse.o apps/beacon.o apps/iclicker.o \
 	apps/submenu.o
 

firmware/api.h

@@ -28,6 +28,7 @@
 #include "codeplug.h"
 #include "power.h"
 #include "dmesg.h"
+#include "buzz.h"
 #include "gittag.h" //Autogenerated
 
 //Handy libraries.  These are tested host-side.

firmware/applist.c

@@ -15,10 +15,6 @@ const struct app apps[]={
   {.name="clock", .init=clock_init, .draw=clock_draw, .exit=clock_exit,
    .keypress=clock_keypress
   },
-  //Alarm
-  {.name="alarm", .init=alarm_init, .draw=alarm_draw, .exit=alarm_exit,
-   .keypress=alarm_keypress
-  },
   //Stopwatch
   {.name="timer", .init=stopwatch_init, .draw=stopwatch_draw, .exit=stopwatch_exit,
    .keypress=stopwatch_keypress

firmware/applist.h

@@ -6,7 +6,6 @@
 
 //Non-radio apps first.
 #include "apps/clock.h"
-#include "apps/alarm.h"
 #include "apps/stopwatch.h"
 #include "apps/rpn.h"
 #include "apps/hex.h"

firmware/buzz.c

@@ -0,0 +1,60 @@
+/*! \file buzz.c
+  \brief Handy buzzer functions.
+  
+  These are currently untested, as the buzzer causes the GoodWatch20
+  to glitch out.  We hope to have proper buzzer support in the
+  GoodWatch21.
+*/
+
+#include<msp430.h>
+
+#include<stdio.h>
+
+//! Make a quick buzz.
+void buzz(unsigned int count){
+  //Start the timer.
+  if(count){
+    //Output select mode for P2.7.
+    P2DIR|=0x80;
+    P2SEL|=0x80;
+    
+    //P2.7 might need high drive strength for the piezo.
+    //P2DS|=0x80;
+
+    
+    TA1CCR0 = count;
+    TA1CTL |= MC__UP;
+  }else{
+    //Stop the timer when it's not in use.
+    TA1CTL = TACLR | TASSEL__SMCLK | MC__STOP;
+
+    //Input mode for the pin, so we don't accidentally leak power.
+    P2DIR&=~0x80;
+    P2SEL&=~0x80;
+  }
+}
+
+
+//! Initializes the buzzer port.
+void buzz_init(){
+  TA1CTL=0;
+  
+  //Unlock port mapping.
+  PMAPKEYID=0x2d52;
+  if(PMAPCTL&1)
+    printf("Ugh, port mapping is locked.\n");
+  
+  //Route timera1 to the pin.  This might conflict with rng.c.
+  P2MAP7=PM_TA1CCR0A;;
+  
+  //Lock port mapping.
+  PMAPKEYID=0x96a5;
+  
+  
+  TA1CTL = TACLR | TASSEL__SMCLK | MC__STOP;
+  TA1CCTL0 = OUTMOD_4;
+  TA1CCTL0 &= ~CCIE;
+
+  P2SEL|=0x80;
+}
+

firmware/buzz.h

@@ -0,0 +1,10 @@
+/*! \file buzz.h
+  \brief Handy buzzer functions.
+*/
+
+//! Initializes the buzzer port.
+void buzz_init();
+
+//! Make a quick buzz.
+void buzz(int);
+

firmware/keypad.c

@@ -20,8 +20,8 @@ void key_init(){
   /* Columns 2.2, 2.1, 2.0, and 1.7 are set to output mode pulled
      high, so that any low row indicates a button press. */
 
-  P2SEL=0x00;  //All of port 2 are IO.
+  P2SEL&=~0x7F;  //All of port 2 except the buzzer are IO.
-  P2DIR=BIT2|BIT1|BIT0;  //Rows are input, columns are  output.
+  P2DIR=BIT2|BIT1|BIT0;  //These columns are  output.
   P2REN|=0xFF; //All resistor.
   P2OUT=BIT2|BIT1|BIT0; //Pull all of them down.
 
@@ -30,6 +30,9 @@ void key_init(){
   P1REN|=0x80;
   P1OUT|=0x80;  //Output high.
 
+
+  P2DIR|=BIT7; // Buzzer is on P2.7.
+
   //Trigger interrupts for keypresses so we needn't scan.
   P2IE|=BIT2|BIT1|BIT0;
 }
@@ -44,8 +47,8 @@ int key_row(){
   int row;
   P1DIR|=0x80; //P1.7 out.
   P1OUT|=0x80; //P1.7 high.
-  P2DIR= 0x07;  //P2.0, 2.1, 2.2 out.
+  P2DIR|=0x07;  //P2.0, 2.1, 2.2 out.
-  P2OUT= 0x07;  //P2.0, 2.1, 2.2 high.
+  P2OUT|=0x07;  //P2.0, 2.1, 2.2 high.
 
   //We'll return this result, but after cleaning up.
   row=(P2IN>>3)&0x0F;
@@ -60,8 +63,11 @@ int key_col(){
   int col;
   P1DIR&=~0x80; //Input
   P1OUT&=~0x80; //Low
-  P2DIR= 0xF8;  //P2.1.3, 2.4, 2.5, 2.6 out
+
-  P2OUT= 0xF8;  //P2.1.3, 2.4, 2.5, 2.6 high
+  P2DIR&=~0x07; //P2.3, 2.4, 2.5, 2.6 out
+  P2DIR|= 0x78;
+  P2OUT&=~0x07; //P2.3, 2.4, 2.5, 2.6 high
+  P2OUT|= 0x78;  
 
   //We'll return this result, but after cleaning up.
   col=((P2IN&0x7)<<1) | ((P2IN&0x80)>>7);

firmware/lcdtext.c

@@ -72,7 +72,7 @@ const int letterfont[]={
   E|G|C|D|B,     //D
   A|F|E|G|D,     //E
   A|G|F|E,       //F
-  A|F|E|C|D,     //G
+  A|F|G|E|C|D,   //G
   F|G|E|C,       //h
   F|E,           //I, distinguished from a 1 by being on the left side.
   E|B|C|D,       //J

firmware/main.c

@@ -89,6 +89,15 @@ int main(void) {
   lcd_string("OSC INIT");
   ucs_init();
 
+  /* TODO Enable this once we have hardware with a working buzzer.
+     
+  lcd_zero();
+  printf("buzz ");
+  lcd_string("BUZZINIT");
+  buzz_init();
+  buzz(1024);
+  */
+
   lcd_zero();
   lcd_string("UARTINIT");
   uart_init();

firmware/rtc.c

@@ -164,7 +164,6 @@ void __attribute__ ((interrupt(RTC_VECTOR))) RTC_ISR (void){
         //! Sound the alarm
         alarm_trigger();
       }
-      
       break;
     case 8: break;                          // RT0PSIFG
     case 10: break;                         // RT1PSIFG