kamilsss655/settings.c

/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#include <string.h>

#ifdef ENABLE_FMRADIO
	#include "app/fm.h"
#endif
#include "driver/eeprom.h"
#include "driver/uart.h"
#include "misc.h"
#include "settings.h"

EEPROM_Config_t gEeprom;

#ifdef ENABLE_FMRADIO
	void SETTINGS_SaveFM(void)
	{
		unsigned int i;
	
		struct
		{
			uint16_t Frequency;
			uint8_t  Channel;
			bool     IsChannelSelected;
			uint8_t  Padding[4];
		} State;
	
		UART_LogSend("sFm\r\n", 5);
	
		memset(&State, 0xFF, sizeof(State));
		State.Channel           = gEeprom.FM_SelectedChannel;
		State.Frequency         = gEeprom.FM_SelectedFrequency;
		State.IsChannelSelected = gEeprom.FM_IsMrMode;
	
		EEPROM_WriteBuffer(0x0E88, &State);
		for (i = 0; i < 5; i++)
			EEPROM_WriteBuffer(0x0E40 + (i * 8), &gFM_Channels[i * 4]);
	}
#endif

void SETTINGS_SaveVfoIndices(void)
{
	uint8_t State[8];

	UART_LogSend("sidx\r\n", 6);

	State[0] = gEeprom.ScreenChannel[0];
	State[1] = gEeprom.MrChannel[0];
	State[2] = gEeprom.FreqChannel[0];
	State[3] = gEeprom.ScreenChannel[1];
	State[4] = gEeprom.MrChannel[1];
	State[5] = gEeprom.FreqChannel[1];
	#ifdef ENABLE_NOAA
		State[6] = gEeprom.NoaaChannel[0];
		State[7] = gEeprom.NoaaChannel[1];
	#else
		State[6] = NOAA_CHANNEL_FIRST;
		State[7] = NOAA_CHANNEL_FIRST;
	#endif

	EEPROM_WriteBuffer(0x0E80, State);
}

void SETTINGS_SaveSettings(void)
{
	uint8_t  State[8];
	uint32_t Password[2];

	UART_LogSend("spub\r\n", 6);

	State[0] = gEeprom.CHAN_1_CALL;
	State[1] = gEeprom.SQUELCH_LEVEL;
	State[2] = gEeprom.TX_TIMEOUT_TIMER;
	#ifdef ENABLE_NOAA
		State[3] = gEeprom.NOAA_AUTO_SCAN;
	#else
		State[3] = false;
	#endif
	State[4] = gEeprom.KEY_LOCK;
	State[5] = gEeprom.VOX_SWITCH;
	State[6] = gEeprom.VOX_LEVEL;
	State[7] = gEeprom.MIC_SENSITIVITY;
	EEPROM_WriteBuffer(0x0E70, State);

	State[0] = 0xFF;
	State[1] = gEeprom.CHANNEL_DISPLAY_MODE;
	State[2] = gEeprom.CROSS_BAND_RX_TX;
	State[3] = gEeprom.BATTERY_SAVE;
	State[4] = gEeprom.DUAL_WATCH;
	State[5] = gEeprom.BACKLIGHT;
	State[6] = gEeprom.TAIL_NOTE_ELIMINATION;
	State[7] = gEeprom.VFO_OPEN;
	EEPROM_WriteBuffer(0x0E78, State);

	State[0] = gEeprom.BEEP_CONTROL;
	State[1] = gEeprom.KEY_1_SHORT_PRESS_ACTION;
	State[2] = gEeprom.KEY_1_LONG_PRESS_ACTION;
	State[3] = gEeprom.KEY_2_SHORT_PRESS_ACTION;
	State[4] = gEeprom.KEY_2_LONG_PRESS_ACTION;
	State[5] = gEeprom.SCAN_RESUME_MODE;
	State[6] = gEeprom.AUTO_KEYPAD_LOCK;
	State[7] = gEeprom.POWER_ON_DISPLAY_MODE;
	EEPROM_WriteBuffer(0x0E90, State);

	memset(Password, 0xFF, sizeof(Password));
	Password[0] = gEeprom.POWER_ON_PASSWORD;
	EEPROM_WriteBuffer(0x0E98, State);

	#ifdef ENABLE_VOICE
		memset(State, 0xFF, sizeof(State));
		State[0] = gEeprom.VOICE_PROMPT;
		EEPROM_WriteBuffer(0x0EA0, State);
	#endif

	#ifdef ENABLE_ALARM
		State[0] = gEeprom.ALARM_MODE;
	#else
		State[0] = false;
	#endif
	State[1] = gEeprom.ROGER;
	State[2] = gEeprom.REPEATER_TAIL_TONE_ELIMINATION;
	State[3] = gEeprom.TX_CHANNEL;
	EEPROM_WriteBuffer(0x0EA8, State);

	State[0] = gEeprom.DTMF_SIDE_TONE;
	State[1] = gEeprom.DTMF_SEPARATE_CODE;
	State[2] = gEeprom.DTMF_GROUP_CALL_CODE;
	State[3] = gEeprom.DTMF_DECODE_RESPONSE;
	State[4] = gEeprom.DTMF_AUTO_RESET_TIME;
	State[5] = gEeprom.DTMF_PRELOAD_TIME / 10U;
	State[6] = gEeprom.DTMF_FIRST_CODE_PERSIST_TIME / 10U;
	State[7] = gEeprom.DTMF_HASH_CODE_PERSIST_TIME / 10U;
	EEPROM_WriteBuffer(0x0ED0, State);

	memset(State, 0xFF, sizeof(State));
	State[0] = gEeprom.DTMF_CODE_PERSIST_TIME / 10U;
	State[1] = gEeprom.DTMF_CODE_INTERVAL_TIME / 10U;
	State[2] = gEeprom.PERMIT_REMOTE_KILL;
	EEPROM_WriteBuffer(0x0ED8, State);

	State[0] = gEeprom.SCAN_LIST_DEFAULT;
	State[1] = gEeprom.SCAN_LIST_ENABLED[0];
	State[2] = gEeprom.SCANLIST_PRIORITY_CH1[0];
	State[3] = gEeprom.SCANLIST_PRIORITY_CH2[0];
	State[4] = gEeprom.SCAN_LIST_ENABLED[1];
	State[5] = gEeprom.SCANLIST_PRIORITY_CH1[1];
	State[6] = gEeprom.SCANLIST_PRIORITY_CH2[1];
	State[7] = 0xFF;
	EEPROM_WriteBuffer(0x0F18, State);

	memset(State, 0xFF, sizeof(State));
	State[0] = gSetting_F_LOCK;
	State[1] = gSetting_350TX;
	State[2] = gSetting_KILLED;
	State[3] = gSetting_200TX;
	State[4] = gSetting_500TX;
	State[5] = gSetting_350EN;
	State[6] = gSetting_ScrambleEnable;
	EEPROM_WriteBuffer(0x0F40, State);
}

void SETTINGS_SaveChannel(uint8_t Channel, uint8_t VFO, const VFO_Info_t *pVFO, uint8_t Mode)
{
	UART_LogSend("schn\r\n", 6);

	#ifdef ENABLE_NOAA
		if (IS_NOT_NOAA_CHANNEL(Channel))
	#endif
	{
		const uint16_t OffsetMR  = Channel * 16;
		      uint16_t OffsetVFO = OffsetMR;

		if (!IS_MR_CHANNEL(Channel))
		{
			OffsetVFO  = (VFO == 0) ? 0x0C80 : 0x0C90;
			OffsetVFO += (Channel - FREQ_CHANNEL_FIRST) * 32;
		}

		if (Mode >= 2 || !IS_MR_CHANNEL(Channel))
		{
			uint32_t State32[2];
			uint8_t  State8[8];

			State32[0] = pVFO->ConfigRX.Frequency;
			State32[1] = pVFO->TX_OFFSET_FREQUENCY;
			EEPROM_WriteBuffer(OffsetVFO + 0, State32);

			State8[0] =  pVFO->ConfigRX.Code;
			State8[1] =  pVFO->ConfigTX.Code;
			State8[2] = (pVFO->ConfigTX.CodeType << 4) | pVFO->ConfigRX.CodeType;
			State8[3] = (pVFO->AM_CHANNEL_MODE   << 4) | pVFO->TX_OFFSET_FREQUENCY_DIRECTION;
			State8[4] = 0
				| (pVFO->BUSY_CHANNEL_LOCK << 4)
				| (pVFO->OUTPUT_POWER      << 2)
				| (pVFO->CHANNEL_BANDWIDTH << 1)
				| (pVFO->FrequencyReverse  << 0);
			State8[5] = (pVFO->DTMF_PTT_ID_TX_MODE << 1) | pVFO->DTMF_DECODING_ENABLE;
			State8[6] =  pVFO->STEP_SETTING;
			State8[7] =  pVFO->SCRAMBLING_TYPE;
			EEPROM_WriteBuffer(OffsetVFO + 8, State8);

			SETTINGS_UpdateChannel(Channel, pVFO, true);

			#ifndef KEEP_MEM_NAME
				if (IS_MR_CHANNEL(Channel))
				{	// clear/reset the channel name
					memset(&State8, 0xFF, sizeof(State8));
					EEPROM_WriteBuffer(0x0F50 + OffsetMR, State8);
					EEPROM_WriteBuffer(0x0F58 + OffsetMR, State8);
				}
			#endif
		}
	}
}

void SETTINGS_UpdateChannel(uint8_t Channel, const VFO_Info_t *pVFO, bool bUpdate)
{
	UART_LogSend("svalid\r\n", 8);

	#ifdef ENABLE_NOAA
		if (IS_NOT_NOAA_CHANNEL(Channel))
	#endif
	{
		uint8_t  State[8];
		uint8_t  Attributes = 0xFF;
		uint16_t Offset     = 0x0D60 + (Channel & ~7U);

		EEPROM_ReadBuffer(Offset, State, sizeof(State));

		if (bUpdate)
		{
			Attributes = (pVFO->SCANLIST1_PARTICIPATION << 7) | (pVFO->SCANLIST2_PARTICIPATION << 6) | (pVFO->Band << 0);
			if (State[Channel & 7U] == Attributes)
				return;
		}

		State[Channel & 7U] = Attributes;

		EEPROM_WriteBuffer(Offset, State);

		gMR_ChannelAttributes[Channel] = Attributes;

		#ifndef KEEP_MEM_NAME
			if (IS_MR_CHANNEL(Channel))
			{	// clear/reset the channel name
				const uint16_t OffsetMR = Channel * 16;
				memset(&State, 0xFF, sizeof(State));
				EEPROM_WriteBuffer(0x0F50 + OffsetMR, State);
				EEPROM_WriteBuffer(0x0F58 + OffsetMR, State);
			}
		#endif
	}
}