mirrors/kamilsss655
1
0
Fork 0
mirror of https://github.com/kamilsss655/uv-k5-firmware-custom synced 2024-11-22 19:18:56 +00:00
Code Issues Packages Projects Releases Wiki Activity
9c6b1252f0
kamilsss655/radio.c

1131 lines
29 KiB
C
Raw Blame History

/* Copyright 2023 Dual Tachyon
* https://github.com/DualTachyon
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <string.h>
#include "app/dtmf.h"
#ifdef ENABLE_FMRADIO
#include "app/fm.h"
#endif
#include "audio.h"
#include "bsp/dp32g030/gpio.h"
#include "dcs.h"
#include "driver/bk4819.h"
#include "driver/eeprom.h"
#include "driver/gpio.h"
#include "driver/system.h"
#include "frequencies.h"
#include "functions.h"
#include "helper/battery.h"
#include "misc.h"
#include "radio.h"
#include "settings.h"
#include "ui/menu.h"
#include "board.h"
#ifdef ENABLE_MESSENGER
#include "app/messenger.h"
#endif
VFO_Info_t *gTxVfo;
VFO_Info_t *gRxVfo;
VFO_Info_t *gCurrentVfo;
DCS_CodeType_t gCurrentCodeType;
VfoState_t VfoState[2];
const char gModulationStr[][4] =
{
"FM",
"AM",
"USB",
#ifdef ENABLE_BYP_RAW_DEMODULATORS
"BYP",
"RAW"
#endif
};
const char *bwNames[5] = {" 25k", "12.5k", "8.33k", "6.25k", " 5k"};
bool RADIO_CheckValidChannel(uint16_t Channel, bool bCheckScanList, uint8_t VFO)
{ // return true if the channel appears valid
ChannelAttributes_t att;
if (!IS_MR_CHANNEL(Channel))
return false;
att = gMR_ChannelAttributes[Channel];
if (att.band > BAND7_470MHz)
return false;
if (bCheckScanList) {
switch (VFO) {
case 0:
if (!att.scanlist1)
return false;
break;
case 1:
if (!att.scanlist2)
return false;
break;
default:
return true;
}
}
return true;
}
uint8_t RADIO_FindNextChannel(uint8_t Channel, int8_t Direction, bool bCheckScanList, uint8_t VFO)
{
unsigned int i;
for (i = 0; IS_MR_CHANNEL(i); i++)
{
if (Channel == 0xFF)
Channel = MR_CHANNEL_LAST;
else
if (!IS_MR_CHANNEL(Channel))
Channel = MR_CHANNEL_FIRST;
if (RADIO_CheckValidChannel(Channel, bCheckScanList, VFO))
return Channel;
Channel += Direction;
}
return 0xFF;
}
void RADIO_InitInfo(VFO_Info_t *pInfo, const uint8_t ChannelSave, const uint32_t Frequency)
{
memset(pInfo, 0, sizeof(*pInfo));
pInfo->Band = FREQUENCY_GetBand(Frequency);
pInfo->SCANLIST1_PARTICIPATION = false;
pInfo->SCANLIST2_PARTICIPATION = false;
pInfo->STEP_SETTING = STEP_12_5kHz;
pInfo->StepFrequency = gStepFrequencyTable[pInfo->STEP_SETTING];
pInfo->CHANNEL_SAVE = ChannelSave;
pInfo->FrequencyReverse = false;
pInfo->OUTPUT_POWER = OUTPUT_POWER_LOW;
pInfo->freq_config_RX.Frequency = Frequency;
pInfo->freq_config_TX.Frequency = Frequency;
pInfo->pRX = &pInfo->freq_config_RX;
pInfo->pTX = &pInfo->freq_config_TX;
pInfo->Compander = 0; // off
if (ChannelSave == (FREQ_CHANNEL_FIRST + BAND2_108MHz))
pInfo->Modulation = MODULATION_AM;
else
pInfo->Modulation = MODULATION_FM;
RADIO_ConfigureSquelchAndOutputPower(pInfo);
}
void RADIO_ConfigureChannel(const unsigned int VFO, const unsigned int configure)
{
VFO_Info_t *pVfo = &gEeprom.VfoInfo[VFO];
if (!gSetting_350EN) {
if (gEeprom.FreqChannel[VFO] == FREQ_CHANNEL_FIRST + BAND5_350MHz)
gEeprom.FreqChannel[VFO] = FREQ_CHANNEL_FIRST + BAND6_400MHz;
if (gEeprom.ScreenChannel[VFO] == FREQ_CHANNEL_FIRST + BAND5_350MHz)
gEeprom.ScreenChannel[VFO] = FREQ_CHANNEL_FIRST + BAND6_400MHz;
}
uint8_t channel = gEeprom.ScreenChannel[VFO];
if (IS_VALID_CHANNEL(channel)) {
#ifdef ENABLE_NOAA
if (channel >= NOAA_CHANNEL_FIRST)
{
RADIO_InitInfo(pVfo, gEeprom.ScreenChannel[VFO], NoaaFrequencyTable[channel - NOAA_CHANNEL_FIRST]);
if (gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF)
return;
gEeprom.CROSS_BAND_RX_TX = CROSS_BAND_OFF;
gUpdateStatus = true;
return;
}
#endif
if (IS_MR_CHANNEL(channel)) {
channel = RADIO_FindNextChannel(channel, RADIO_CHANNEL_UP, false, VFO);
if (channel == 0xFF) {
channel = gEeprom.FreqChannel[VFO];
gEeprom.ScreenChannel[VFO] = gEeprom.FreqChannel[VFO];
}
else {
gEeprom.ScreenChannel[VFO] = channel;
gEeprom.MrChannel[VFO] = channel;
}
}
}
else
channel = FREQ_CHANNEL_LAST - 1;
ChannelAttributes_t att = gMR_ChannelAttributes[channel];
if (att.__val == 0xFF) { // invalid/unused channel
if (IS_MR_CHANNEL(channel)) {
channel = gEeprom.FreqChannel[VFO];
gEeprom.ScreenChannel[VFO] = channel;
}
uint8_t bandIdx = channel - FREQ_CHANNEL_FIRST;
RADIO_InitInfo(pVfo, channel, frequencyBandTable[bandIdx].lower);
return;
}
uint8_t band = att.band;
if (band > BAND7_470MHz) {
band = BAND6_400MHz;
}
bool bParticipation1;
bool bParticipation2;
if (IS_MR_CHANNEL(channel)) {
bParticipation1 = att.scanlist1;
bParticipation2 = att.scanlist2;
}
else {
band = channel - FREQ_CHANNEL_FIRST;
bParticipation1 = true;
bParticipation2 = true;
}
pVfo->Band = band;
pVfo->SCANLIST1_PARTICIPATION = bParticipation1;
pVfo->SCANLIST2_PARTICIPATION = bParticipation2;
pVfo->CHANNEL_SAVE = channel;
uint16_t base;
if (IS_MR_CHANNEL(channel))
base = channel * 16;
else
base = 0x0C80 + ((channel - FREQ_CHANNEL_FIRST) * 32) + (VFO * 16);
if (configure == VFO_CONFIGURE_RELOAD || IS_FREQ_CHANNEL(channel))
{
uint8_t tmp;
uint8_t data[8];
// ***************
EEPROM_ReadBuffer(base + 8, data, sizeof(data));
tmp = data[3] & 0x0F;
if (tmp > TX_OFFSET_FREQUENCY_DIRECTION_SUB)
tmp = 0;
pVfo->TX_OFFSET_FREQUENCY_DIRECTION = tmp;
tmp = data[3] >> 4;
if (tmp >= MODULATION_UKNOWN)
tmp = MODULATION_FM;
pVfo->Modulation = tmp;
tmp = data[6];
if (tmp >= ARRAY_SIZE(gStepFrequencyTable))
tmp = STEP_12_5kHz;
pVfo->STEP_SETTING = tmp;
pVfo->StepFrequency = gStepFrequencyTable[tmp];
tmp = data[7];
if (tmp > (ARRAY_SIZE(gSubMenu_SCRAMBLER) - 1))
tmp = 0;
pVfo->SCRAMBLING_TYPE = tmp;
pVfo->freq_config_RX.CodeType = (data[2] >> 0) & 0x0F;
pVfo->freq_config_TX.CodeType = (data[2] >> 4) & 0x0F;
tmp = data[0];
switch (pVfo->freq_config_RX.CodeType)
{
default:
case CODE_TYPE_OFF:
pVfo->freq_config_RX.CodeType = CODE_TYPE_OFF;
tmp = 0;
break;
case CODE_TYPE_CONTINUOUS_TONE:
if (tmp > (ARRAY_SIZE(CTCSS_Options) - 1))
tmp = 0;
break;
case CODE_TYPE_DIGITAL:
case CODE_TYPE_REVERSE_DIGITAL:
if (tmp > (ARRAY_SIZE(DCS_Options) - 1))
tmp = 0;
break;
}
pVfo->freq_config_RX.Code = tmp;
tmp = data[1];
switch (pVfo->freq_config_TX.CodeType)
{
default:
case CODE_TYPE_OFF:
pVfo->freq_config_TX.CodeType = CODE_TYPE_OFF;
tmp = 0;
break;
case CODE_TYPE_CONTINUOUS_TONE:
if (tmp > (ARRAY_SIZE(CTCSS_Options) - 1))
tmp = 0;
break;
case CODE_TYPE_DIGITAL:
case CODE_TYPE_REVERSE_DIGITAL:
if (tmp > (ARRAY_SIZE(DCS_Options) - 1))
tmp = 0;
break;
}
pVfo->freq_config_TX.Code = tmp;
if (data[4] == 0xFF)
{
pVfo->FrequencyReverse = false;
pVfo->CHANNEL_BANDWIDTH = BK4819_FILTER_BW_WIDE;
pVfo->OUTPUT_POWER = OUTPUT_POWER_LOW;
pVfo->BUSY_CHANNEL_LOCK = false;
}
else
{
const uint8_t d4 = data[4];
pVfo->FrequencyReverse = !!((d4 >> 0) & 1u);
if(IS_MR_CHANNEL(channel)){
pVfo->CHANNEL_BANDWIDTH = !!((d4 >> 1) & 1u);
}
pVfo->OUTPUT_POWER = ((d4 >> 2) & 3u);
pVfo->BUSY_CHANNEL_LOCK = !!((d4 >> 4) & 1u);
}
if (data[5] == 0xFF)
{
#ifdef ENABLE_DTMF_CALLING
pVfo->DTMF_DECODING_ENABLE = false;
#endif
pVfo->DTMF_PTT_ID_TX_MODE = PTT_ID_OFF;
}
else
{
#ifdef ENABLE_DTMF_CALLING
pVfo->DTMF_DECODING_ENABLE = ((data[5] >> 0) & 1u) ? true : false;
#endif
pVfo->DTMF_PTT_ID_TX_MODE = ((data[5] >> 1) & 7u);
}
// ***************
struct {
uint32_t Frequency;
uint32_t Offset;
} __attribute__((packed)) info;
EEPROM_ReadBuffer(base, &info, sizeof(info));
if(info.Frequency==0xFFFFFFFF)
pVfo->freq_config_RX.Frequency = frequencyBandTable[band].lower;
else
pVfo->freq_config_RX.Frequency = info.Frequency;
if (info.Offset >= 100000000)
info.Offset = 1000000;
pVfo->TX_OFFSET_FREQUENCY = info.Offset;
// ***************
}
uint32_t frequency = pVfo->freq_config_RX.Frequency;
// fix previously set incorrect band
band = FREQUENCY_GetBand(frequency);
if (frequency < Band_freq_min(band))
frequency = Band_freq_min(band);
else if (frequency > frequencyBandTable[band].upper)
frequency = frequencyBandTable[band].upper;
else if (channel >= FREQ_CHANNEL_FIRST)
frequency = FREQUENCY_RoundToStep(frequency, pVfo->StepFrequency);
pVfo->freq_config_RX.Frequency = frequency;
if (frequency >= frequencyBandTable[BAND2_108MHz].upper && frequency < frequencyBandTable[BAND2_108MHz].upper)
pVfo->TX_OFFSET_FREQUENCY_DIRECTION = TX_OFFSET_FREQUENCY_DIRECTION_OFF;
else if (!IS_MR_CHANNEL(channel))
pVfo->TX_OFFSET_FREQUENCY = FREQUENCY_RoundToStep(pVfo->TX_OFFSET_FREQUENCY, pVfo->StepFrequency);
RADIO_ApplyTxOffset(pVfo);
if (IS_MR_CHANNEL(channel))
{ // 16 bytes allocated to the channel name but only 10 used, the rest are 0's
SETTINGS_FetchChannelName(pVfo->Name, channel);
}
if (!pVfo->FrequencyReverse)
{
pVfo->pRX = &pVfo->freq_config_RX;
pVfo->pTX = &pVfo->freq_config_TX;
}
else
{
pVfo->pRX = &pVfo->freq_config_TX;
pVfo->pTX = &pVfo->freq_config_RX;
}
if (!gSetting_350EN)
{
FREQ_Config_t *pConfig = pVfo->pRX;
if (pConfig->Frequency >= 35000000 && pConfig->Frequency < 40000000)
pConfig->Frequency = 43300000;
}
if (pVfo->Modulation != MODULATION_FM)
{ // freq/chan is in AM mode
pVfo->SCRAMBLING_TYPE = 0;
// pVfo->DTMF_DECODING_ENABLE = false; // no reason to disable DTMF decoding, aircraft use it on SSB
pVfo->freq_config_RX.CodeType = CODE_TYPE_OFF;
pVfo->freq_config_TX.CodeType = CODE_TYPE_OFF;
}
pVfo->Compander = att.compander;
BK4819_InitAGC(gEeprom.RX_AGC, gTxVfo->Modulation);
BK4819_SetAGC(gEeprom.RX_AGC!=RX_AGC_OFF);
RADIO_ConfigureSquelchAndOutputPower(pVfo);
}
void RADIO_ConfigureSquelchAndOutputPower(VFO_Info_t *pInfo)
{
uint8_t Txp[3];
FREQUENCY_Band_t Band;
// *******************************
// squelch
Band = FREQUENCY_GetBand(pInfo->pRX->Frequency);
uint16_t Base = (Band < BAND4_174MHz) ? 0x1E60 : 0x1E00;
if (gEeprom.SQUELCH_LEVEL == 0)
{ // squelch == 0 (off)
pInfo->SquelchOpenRSSIThresh = 0; // 0 ~ 255
pInfo->SquelchOpenNoiseThresh = 127; // 127 ~ 0
pInfo->SquelchCloseGlitchThresh = 255; // 255 ~ 0
pInfo->SquelchCloseRSSIThresh = 0; // 0 ~ 255
pInfo->SquelchCloseNoiseThresh = 127; // 127 ~ 0
pInfo->SquelchOpenGlitchThresh = 255; // 255 ~ 0
}
else
{ // squelch >= 1
Base += gEeprom.SQUELCH_LEVEL; // my eeprom squelch-1
// VHF UHF
EEPROM_ReadBuffer(Base + 0x00, &pInfo->SquelchOpenRSSIThresh, 1); // 50 10
EEPROM_ReadBuffer(Base + 0x10, &pInfo->SquelchCloseRSSIThresh, 1); // 40 5
EEPROM_ReadBuffer(Base + 0x20, &pInfo->SquelchOpenNoiseThresh, 1); // 65 90
EEPROM_ReadBuffer(Base + 0x30, &pInfo->SquelchCloseNoiseThresh, 1); // 70 100
EEPROM_ReadBuffer(Base + 0x40, &pInfo->SquelchCloseGlitchThresh, 1); // 90 90
EEPROM_ReadBuffer(Base + 0x50, &pInfo->SquelchOpenGlitchThresh, 1); // 100 100
uint16_t rssi_open = pInfo->SquelchOpenRSSIThresh;
uint16_t rssi_close = pInfo->SquelchCloseRSSIThresh;
uint16_t noise_open = pInfo->SquelchOpenNoiseThresh;
uint16_t noise_close = pInfo->SquelchCloseNoiseThresh;
uint16_t glitch_open = pInfo->SquelchOpenGlitchThresh;
uint16_t glitch_close = pInfo->SquelchCloseGlitchThresh;
#if ENABLE_SQUELCH_MORE_SENSITIVE
// make squelch a little more sensitive
//
// getting the best setting here is still experimental, bare with me
//
// note that 'noise' and 'glitch' values are inverted compared to 'rssi' values
#if 0
rssi_open = (rssi_open * 8) / 9;
noise_open = (noise_open * 9) / 8;
glitch_open = (glitch_open * 9) / 8;
#else
// even more sensitive .. use when RX bandwidths are fixed (no weak signal auto adjust)
rssi_open = (rssi_open * 1) / 2;
noise_open = (noise_open * 2) / 1;
glitch_open = (glitch_open * 2) / 1;
#endif
#else
// more sensitive .. use when RX bandwidths are fixed (no weak signal auto adjust)
rssi_open = (rssi_open * 3) / 4;
noise_open = (noise_open * 4) / 3;
glitch_open = (glitch_open * 4) / 3;
#endif
// make squelch more sensitive for HF bands
if(Band <= BAND1_50MHz) {
rssi_close = (rssi_open * 5) / 6;
noise_close = (noise_open * 6) / 5;
glitch_close = (glitch_open * 6) / 5;
}
else
{
rssi_close = (rssi_open * 9) / 10;
noise_close = (noise_open * 10) / 9;
glitch_close = (glitch_open * 10) / 9;
}
// ensure the 'close' threshold is lower than the 'open' threshold
if (rssi_close == rssi_open && rssi_close >= 2)
rssi_close -= 2;
if (noise_close == noise_open && noise_close <= 125)
noise_close += 2;
if (glitch_close == glitch_open && glitch_close <= 253)
glitch_close += 2;
pInfo->SquelchOpenRSSIThresh = (rssi_open > 255) ? 255 : rssi_open;
pInfo->SquelchCloseRSSIThresh = (rssi_close > 255) ? 255 : rssi_close;
pInfo->SquelchOpenNoiseThresh = (noise_open > 127) ? 127 : noise_open;
pInfo->SquelchCloseNoiseThresh = (noise_close > 127) ? 127 : noise_close;
pInfo->SquelchOpenGlitchThresh = (glitch_open > 255) ? 255 : glitch_open;
pInfo->SquelchCloseGlitchThresh = (glitch_close > 255) ? 255 : glitch_close;
}
// *******************************
// output power
Band = FREQUENCY_GetBand(pInfo->pTX->Frequency);
EEPROM_ReadBuffer(0x1ED0 + (Band * 16) + (pInfo->OUTPUT_POWER * 3), Txp, 3);
#ifdef ENABLE_REDUCE_LOW_POWER
// make low even lower
if (pInfo->OUTPUT_POWER == OUTPUT_POWER_LOW) {
Txp[0] /= 3;
Txp[1] /= 3;
Txp[2] /= 3;
}
#endif
pInfo->TXP_CalculatedSetting = FREQUENCY_CalculateOutputPower(
Txp[0],
Txp[1],
Txp[2],
frequencyBandTable[Band].lower,
(frequencyBandTable[Band].lower + frequencyBandTable[Band].upper) / 2,
frequencyBandTable[Band].upper,
pInfo->pTX->Frequency);
// *******************************
}
void RADIO_ApplyTxOffset(VFO_Info_t *pInfo)
{
uint32_t Frequency = pInfo->freq_config_RX.Frequency;
switch (pInfo->TX_OFFSET_FREQUENCY_DIRECTION)
{
case TX_OFFSET_FREQUENCY_DIRECTION_OFF:
break;
case TX_OFFSET_FREQUENCY_DIRECTION_ADD:
Frequency += pInfo->TX_OFFSET_FREQUENCY;
break;
case TX_OFFSET_FREQUENCY_DIRECTION_SUB:
Frequency -= pInfo->TX_OFFSET_FREQUENCY;
break;
}
if (Frequency < frequencyBandTable[0].lower)
Frequency = frequencyBandTable[0].lower;
else
if (Frequency > frequencyBandTable[ARRAY_SIZE(frequencyBandTable) - 1].upper)
Frequency = frequencyBandTable[ARRAY_SIZE(frequencyBandTable) - 1].upper;
pInfo->freq_config_TX.Frequency = Frequency;
}
static void RADIO_SelectCurrentVfo(void)
{
// if crossband is active and DW not the gCurrentVfo is gTxVfo (gTxVfo/TX_VFO is only ever changed by the user)
// otherwise it is set to gRxVfo which is set to gTxVfo in RADIO_SelectVfos
// so in the end gCurrentVfo is equal to gTxVfo unless dual watch changes it on incomming transmition (again, this can only happen when XB off)
// note: it is called only in certain situations so could be not up-to-date
gCurrentVfo = (gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF || gEeprom.DUAL_WATCH != DUAL_WATCH_OFF) ? gRxVfo : gTxVfo;
}
void RADIO_SelectVfos(void)
{
// if crossband without DW is used then RX_VFO is the opposite to the TX_VFO
gEeprom.RX_VFO = (gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF || gEeprom.DUAL_WATCH != DUAL_WATCH_OFF) ? gEeprom.TX_VFO : !gEeprom.TX_VFO;
gTxVfo = &gEeprom.VfoInfo[gEeprom.TX_VFO];
gRxVfo = &gEeprom.VfoInfo[gEeprom.RX_VFO];
RADIO_SelectCurrentVfo();
}
void RADIO_SetupRegisters(bool switchToForeground)
{
AUDIO_AudioPathOff();
gEnableSpeaker = false;
BK4819_ToggleGpioOut(BK4819_GPIO6_PIN2_GREEN, false);
BK4819_FilterBandwidth_t Bandwidth = gRxVfo->CHANNEL_BANDWIDTH;
BK4819_SetFilterBandwidth(Bandwidth, gRxVfo->Modulation != MODULATION_AM);
BK4819_ToggleGpioOut(BK4819_GPIO5_PIN1_RED, false);
BK4819_SetupPowerAmplifier(0, 0);
BK4819_ToggleGpioOut(BK4819_GPIO1_PIN29_PA_ENABLE, false);
while (1)
{
const uint16_t Status = BK4819_ReadRegister(BK4819_REG_0C);
if ((Status & 1u) == 0) // INTERRUPT REQUEST
break;
BK4819_WriteRegister(BK4819_REG_02, 0);
SYSTEM_DelayMs(1);
}
BK4819_WriteRegister(BK4819_REG_3F, 0);
// mic gain 0.5dB/step 0 to 31
BK4819_WriteRegister(BK4819_REG_7D, 0xE940 | (gEeprom.MIC_SENSITIVITY_TUNING & 0x1f));
uint32_t Frequency;
#ifdef ENABLE_NOAA
if (!IS_NOAA_CHANNEL(gRxVfo->CHANNEL_SAVE) || !gIsNoaaMode)
Frequency = gRxVfo->pRX->Frequency;
else
Frequency = NoaaFrequencyTable[gNoaaChannel];
#else
Frequency = gRxVfo->pRX->Frequency + gEeprom.RX_OFFSET;
#endif
BK4819_SetFrequency(Frequency);
BK4819_SetupSquelch(
gRxVfo->SquelchOpenRSSIThresh, gRxVfo->SquelchCloseRSSIThresh,
gRxVfo->SquelchOpenNoiseThresh, gRxVfo->SquelchCloseNoiseThresh,
gRxVfo->SquelchCloseGlitchThresh, gRxVfo->SquelchOpenGlitchThresh);
BK4819_PickRXFilterPathBasedOnFrequency(Frequency);
// what does this in do ?
BK4819_ToggleGpioOut(BK4819_GPIO0_PIN28_RX_ENABLE, true);
// AF RX Gain and DAC
//BK4819_WriteRegister(BK4819_REG_48, 0xB3A8); // 1011 00 111010 1000
BK4819_WriteRegister(BK4819_REG_48,
(11u << 12) | // ??? .. 0 ~ 15, doesn't seem to make any difference
( 0u << 10) | // AF Rx Gain-1
(gEeprom.VOLUME_GAIN << 4) | // AF Rx Gain-2
(gEeprom.DAC_GAIN << 0)); // AF DAC Gain (after Gain-1 and Gain-2)
uint16_t InterruptMask = BK4819_REG_3F_SQUELCH_FOUND | BK4819_REG_3F_SQUELCH_LOST;
#ifdef ENABLE_NOAA
if (!IS_NOAA_CHANNEL(gRxVfo->CHANNEL_SAVE))
#endif
{
if (gRxVfo->Modulation == MODULATION_FM)
{ // FM
uint8_t CodeType = gRxVfo->pRX->CodeType;
uint8_t Code = gRxVfo->pRX->Code;
switch (CodeType)
{
default:
case CODE_TYPE_OFF:
// this only works as a setup function for REG_51
BK4819_SetCTCSSFrequency(CTCSS_Options[gEeprom.SQL_TONE]);
// and REG_07 is overwritten by this function
BK4819_SetTailDetection(CTCSS_Options[gEeprom.SQL_TONE]);
InterruptMask = BK4819_REG_3F_CxCSS_TAIL | BK4819_REG_3F_SQUELCH_FOUND | BK4819_REG_3F_SQUELCH_LOST;
break;
case CODE_TYPE_CONTINUOUS_TONE:
BK4819_SetCTCSSFrequency(CTCSS_Options[Code]);
InterruptMask = 0
| BK4819_REG_3F_CxCSS_TAIL
| BK4819_REG_3F_CTCSS_FOUND
| BK4819_REG_3F_CTCSS_LOST
| BK4819_REG_3F_SQUELCH_FOUND
| BK4819_REG_3F_SQUELCH_LOST;
break;
case CODE_TYPE_DIGITAL:
case CODE_TYPE_REVERSE_DIGITAL:
BK4819_SetCDCSSCodeWord(DCS_GetGolayCodeWord(CodeType, Code));
InterruptMask = 0
| BK4819_REG_3F_CxCSS_TAIL
| BK4819_REG_3F_CDCSS_FOUND
| BK4819_REG_3F_CDCSS_LOST
| BK4819_REG_3F_SQUELCH_FOUND
| BK4819_REG_3F_SQUELCH_LOST;
break;
}
if (gRxVfo->SCRAMBLING_TYPE > 0 && gSetting_ScrambleEnable)
BK4819_EnableScramble(gRxVfo->SCRAMBLING_TYPE - 1);
else
BK4819_DisableScramble();
}
}
#ifdef ENABLE_NOAA
else
{
BK4819_SetCTCSSFrequency(2625);
InterruptMask = 0
| BK4819_REG_3F_CTCSS_FOUND
| BK4819_REG_3F_CTCSS_LOST
| BK4819_REG_3F_SQUELCH_FOUND
| BK4819_REG_3F_SQUELCH_LOST;
}
#endif
#ifdef ENABLE_VOX
#ifdef ENABLE_NOAA
#ifdef ENABLE_FMRADIO
if (gEeprom.VOX_SWITCH && !gFmRadioMode && !IS_NOAA_CHANNEL(gCurrentVfo->CHANNEL_SAVE) && gCurrentVfo->Modulation == MODULATION_FM)
#else
if (gEeprom.VOX_SWITCH && !IS_NOAA_CHANNEL(gCurrentVfo->CHANNEL_SAVE) && gCurrentVfo->Modulation == MODULATION_FM)
#endif
#else
#ifdef ENABLE_FMRADIO
if (gEeprom.VOX_SWITCH && !gFmRadioMode && gCurrentVfo->Modulation == MODULATION_FM)
#else
if (gEeprom.VOX_SWITCH && gCurrentVfo->Modulation == MODULATION_FM)
#endif
#endif
{
BK4819_EnableVox(gEeprom.VOX1_THRESHOLD, gEeprom.VOX0_THRESHOLD, gEeprom.VOX_DELAY);
InterruptMask |= BK4819_REG_3F_VOX_FOUND | BK4819_REG_3F_VOX_LOST;
}
else
#endif
BK4819_DisableVox();
// RX expander
BK4819_SetCompander((gRxVfo->Modulation == MODULATION_FM && gRxVfo->Compander >= 2) ? gRxVfo->Compander : 0);
#if 0
if (!gRxVfo->DTMF_DECODING_ENABLE && !gSetting_KILLED)
{
BK4819_DisableDTMF();
}
else
{
BK4819_EnableDTMF();
InterruptMask |= BK4819_REG_3F_DTMF_5TONE_FOUND;
}
#else
if (gCurrentFunction != FUNCTION_TRANSMIT)
{
BK4819_DisableDTMF();
BK4819_EnableDTMF();
InterruptMask |= BK4819_REG_3F_DTMF_5TONE_FOUND;
}
else
{
BK4819_DisableDTMF();
}
#endif
// enable/disable BK4819 selected interrupts
#ifdef ENABLE_MESSENGER
MSG_EnableRX(true);
InterruptMask |= BK4819_REG_3F_FSK_RX_SYNC | BK4819_REG_3F_FSK_RX_FINISHED | BK4819_REG_3F_FSK_FIFO_ALMOST_FULL | BK4819_REG_3F_FSK_TX_FINISHED;
#endif
BK4819_WriteRegister(BK4819_REG_3F, InterruptMask);
FUNCTION_Init();
if (switchToForeground)
FUNCTION_Select(FUNCTION_FOREGROUND);
}
#ifdef ENABLE_NOAA
void RADIO_ConfigureNOAA(void)
{
uint8_t ChanAB;
gUpdateStatus = true;
if (gEeprom.NOAA_AUTO_SCAN)
{
if (gEeprom.DUAL_WATCH != DUAL_WATCH_OFF)
{
if (!IS_NOAA_CHANNEL(gEeprom.ScreenChannel[0]))
{
if (!IS_NOAA_CHANNEL(gEeprom.ScreenChannel[1]))
{
gIsNoaaMode = false;
return;
}
ChanAB = 1;
}
else
ChanAB = 0;
if (!gIsNoaaMode)
gNoaaChannel = gEeprom.VfoInfo[ChanAB].CHANNEL_SAVE - NOAA_CHANNEL_FIRST;
gIsNoaaMode = true;
return;
}
if (gRxVfo->CHANNEL_SAVE >= NOAA_CHANNEL_FIRST)
{
gIsNoaaMode = true;
gNoaaChannel = gRxVfo->CHANNEL_SAVE - NOAA_CHANNEL_FIRST;
gNOAA_Countdown_10ms = NOAA_countdown_2_10ms;
gScheduleNOAA = false;
}
else
gIsNoaaMode = false;
}
else
gIsNoaaMode = false;
}
#endif
void RADIO_SetTxParameters(void)
{
AUDIO_AudioPathOff();
gEnableSpeaker = false;
BK4819_ToggleGpioOut(BK4819_GPIO0_PIN28_RX_ENABLE, false);
BK4819_FilterBandwidth_t Bandwidth = gCurrentVfo->CHANNEL_BANDWIDTH;
BK4819_SetFilterBandwidth(Bandwidth, gTxVfo->Modulation != MODULATION_AM);
BK4819_SetFrequency(gCurrentVfo->pTX->Frequency);
// TX compressor
BK4819_SetCompander((gRxVfo->Modulation == MODULATION_FM && (gRxVfo->Compander == 1 || gRxVfo->Compander >= 3)) ? gRxVfo->Compander : 0);
BK4819_PrepareTransmit();
SYSTEM_DelayMs(10);
BK4819_PickRXFilterPathBasedOnFrequency(gCurrentVfo->pTX->Frequency);
BK4819_ToggleGpioOut(BK4819_GPIO1_PIN29_PA_ENABLE, true);
SYSTEM_DelayMs(5);
BK4819_SetupPowerAmplifier(gCurrentVfo->TXP_CalculatedSetting, gCurrentVfo->pTX->Frequency);
SYSTEM_DelayMs(10);
switch (gCurrentVfo->pTX->CodeType)
{
default:
case CODE_TYPE_OFF:
BK4819_ExitSubAu();
break;
case CODE_TYPE_CONTINUOUS_TONE:
BK4819_SetCTCSSFrequency(CTCSS_Options[gCurrentVfo->pTX->Code]);
break;
case CODE_TYPE_DIGITAL:
case CODE_TYPE_REVERSE_DIGITAL:
BK4819_SetCDCSSCodeWord(DCS_GetGolayCodeWord(gCurrentVfo->pTX->CodeType, gCurrentVfo->pTX->Code));
break;
}
}
void RADIO_SetModulation(ModulationMode_t modulation)
{
BK4819_AF_Type_t mod;
switch(modulation) {
default:
case MODULATION_FM:
mod = BK4819_AF_FM;
break;
case MODULATION_AM:
mod = BK4819_AF_AM;
break;
case MODULATION_USB:
mod = BK4819_AF_BASEBAND2;
break;
#ifdef ENABLE_BYP_RAW_DEMODULATORS
case MODULATION_BYP:
mod = BK4819_AF_UNKNOWN3;
break;
case MODULATION_RAW:
mod = BK4819_AF_BASEBAND1;
break;
#endif
}
BK4819_SetAF(mod);
BK4819_SetRegValue(afDacGainRegSpec, 0xF);
BK4819_WriteRegister(BK4819_REG_3D, modulation == MODULATION_USB ? 0 : 0x2AAB);
BK4819_SetRegValue(afcDisableRegSpec, modulation != MODULATION_FM);
}
void RADIO_SetVfoState(VfoState_t State)
{
if (State == VFO_STATE_NORMAL)
{
VfoState[0] = VFO_STATE_NORMAL;
VfoState[1] = VFO_STATE_NORMAL;
gVFOStateResumeCountdown_500ms = 0;
}
else
{
if (State == VFO_STATE_VOLTAGE_HIGH)
{
VfoState[0] = VFO_STATE_VOLTAGE_HIGH;
VfoState[1] = VFO_STATE_TX_DISABLE;
}
else
{ // 1of11
const unsigned int vfo = (gEeprom.CROSS_BAND_RX_TX == CROSS_BAND_OFF) ? gEeprom.RX_VFO : gEeprom.TX_VFO;
VfoState[vfo] = State;
}
gVFOStateResumeCountdown_500ms = vfo_state_resume_countdown_500ms;
}
gUpdateDisplay = true;
}
void RADIO_PrepareTX(void)
{
VfoState_t State = VFO_STATE_NORMAL; // default to OK to TX
if (gEeprom.DUAL_WATCH != DUAL_WATCH_OFF)
{ // dual-RX is enabled
gDualWatchCountdown_10ms = dual_watch_count_after_tx_10ms;
gScheduleDualWatch = false;
if (!gRxVfoIsActive)
{ // use the current RX vfo
gEeprom.RX_VFO = gEeprom.TX_VFO;
gRxVfo = gTxVfo;
gRxVfoIsActive = true;
}
// let the user see that DW is not active
gDualWatchActive = false;
gUpdateStatus = true;
}
RADIO_SelectCurrentVfo();
#if defined(ENABLE_ALARM) && defined(ENABLE_TX1750)
if (gAlarmState == ALARM_STATE_OFF ||
gAlarmState == ALARM_STATE_TX1750 ||
(gAlarmState == ALARM_STATE_ALARM && gEeprom.ALARM_MODE == ALARM_MODE_TONE))
#elif defined(ENABLE_ALARM)
if (gAlarmState == ALARM_STATE_OFF ||
(gAlarmState == ALARM_STATE_ALARM && gEeprom.ALARM_MODE == ALARM_MODE_TONE))
#elif defined(ENABLE_TX1750)
if (gAlarmState == ALARM_STATE_OFF ||
gAlarmState == ALARM_STATE_TX1750)
#endif
{
#ifndef ENABLE_TX_WHEN_AM
if (gCurrentVfo->Modulation != MODULATION_FM)
{ // not allowed to TX if in AM mode
State = VFO_STATE_TX_DISABLE;
}
else
#endif
if (gSerialConfigCountDown_500ms > 0)
{ // TX is disabled or config upload/download in progress
State = VFO_STATE_TX_DISABLE;
}
else
if(gEeprom.RX_OFFSET!=0)
{
// disable TX when using RX_OFFSET to protect the upconverter
State = VFO_STATE_TX_DISABLE;
}
else
if (TX_freq_check(gCurrentVfo->pTX->Frequency) == 0)
{ // TX frequency is allowed
if (gCurrentVfo->BUSY_CHANNEL_LOCK && gCurrentFunction == FUNCTION_RECEIVE)
State = VFO_STATE_BUSY; // busy RX'ing a station
else
if (gBatteryDisplayLevel == 0)
State = VFO_STATE_BAT_LOW; // charge your battery !
else
if (gBatteryDisplayLevel > 6)
State = VFO_STATE_VOLTAGE_HIGH; // over voltage .. this is being a pain
}
else
State = VFO_STATE_TX_DISABLE; // TX frequency not allowed
}
if (State != VFO_STATE_NORMAL)
{ // TX not allowed
RADIO_SetVfoState(State);
#if defined(ENABLE_ALARM) || defined(ENABLE_TX1750)
gAlarmState = ALARM_STATE_OFF;
#endif
#ifdef ENABLE_DTMF_CALLING
gDTMF_ReplyState = DTMF_REPLY_NONE;
#endif
AUDIO_PlayBeep(BEEP_500HZ_60MS_DOUBLE_BEEP_OPTIONAL);
return;
}
// TX is allowed
#ifdef ENABLE_DTMF_CALLING
if (gDTMF_ReplyState == DTMF_REPLY_ANI)
{
if (gDTMF_CallMode == DTMF_CALL_MODE_DTMF)
{
gDTMF_IsTx = true;
gDTMF_CallState = DTMF_CALL_STATE_NONE;
gDTMF_TxStopCountdown_500ms = DTMF_txstop_countdown_500ms;
}
else
{
gDTMF_CallState = DTMF_CALL_STATE_CALL_OUT;
gDTMF_IsTx = false;
}
}
#endif
FUNCTION_Select(FUNCTION_TRANSMIT);
gTxTimerCountdown_500ms = 0; // no timeout
#if defined(ENABLE_ALARM) || defined(ENABLE_TX1750)
if (gAlarmState == ALARM_STATE_OFF)
#endif
{
if (gEeprom.TX_TIMEOUT_TIMER == 0)
gTxTimerCountdown_500ms = 60; // 30 sec
else
if (gEeprom.TX_TIMEOUT_TIMER < (ARRAY_SIZE(gSubMenu_TOT) - 1))
gTxTimerCountdown_500ms = 120 * gEeprom.TX_TIMEOUT_TIMER; // minutes
else
gTxTimerCountdown_500ms = 120 * 15; // 15 minutes
}
gTxTimeoutReached = false;
gFlagEndTransmission = false;
gRTTECountdown = 0;
#ifdef ENABLE_DTMF_CALLING
gDTMF_ReplyState = DTMF_REPLY_NONE;
#endif
}
void RADIO_EnableCxCSS(void)
{
switch (gCurrentVfo->pTX->CodeType) {
case CODE_TYPE_DIGITAL:
case CODE_TYPE_REVERSE_DIGITAL:
BK4819_EnableCDCSS();
break;
default:
BK4819_EnableCTCSS();
break;
}
SYSTEM_DelayMs(200);
}
void RADIO_PrepareCssTX(void)
{
RADIO_PrepareTX();
SYSTEM_DelayMs(200);
RADIO_EnableCxCSS();
RADIO_SetupRegisters(true);
}
void RADIO_SendEndOfTransmission(void)
{
if (gEeprom.ROGER == ROGER_MODE_ROGER)
BK4819_PlayRoger();
else
if (gEeprom.ROGER == ROGER_MODE_MDC)
BK4819_PlayRogerMDC();
if (gCurrentVfo->DTMF_PTT_ID_TX_MODE == PTT_ID_APOLLO)
BK4819_PlaySingleTone(2475, 250, 28, gEeprom.DTMF_SIDE_TONE);
if (
#ifdef ENABLE_DTMF_CALLING
gDTMF_CallState == DTMF_CALL_STATE_NONE &&
#endif
(gCurrentVfo->DTMF_PTT_ID_TX_MODE == PTT_ID_TX_DOWN ||
gCurrentVfo->DTMF_PTT_ID_TX_MODE == PTT_ID_BOTH))
{ // end-of-tx
if (gEeprom.DTMF_SIDE_TONE)
{
AUDIO_AudioPathOn();
gEnableSpeaker = true;
SYSTEM_DelayMs(60);
}
BK4819_EnterDTMF_TX(gEeprom.DTMF_SIDE_TONE);
BK4819_PlayDTMFString(
gEeprom.DTMF_DOWN_CODE,
0,
gEeprom.DTMF_FIRST_CODE_PERSIST_TIME,
gEeprom.DTMF_HASH_CODE_PERSIST_TIME,
gEeprom.DTMF_CODE_PERSIST_TIME,
gEeprom.DTMF_CODE_INTERVAL_TIME);
AUDIO_AudioPathOff();
gEnableSpeaker = false;
}
BK4819_ExitDTMF_TX(true);
}
#ifdef ENABLE_SPECTRUM_CHANNEL_SCAN
uint8_t RADIO_ValidMemoryChannelsCount(bool bCheckScanList, uint8_t VFO)
{
uint8_t count=0;
for (int i = MR_CHANNEL_FIRST; i<=MR_CHANNEL_LAST; ++i) {
if(RADIO_CheckValidChannel(i, bCheckScanList, VFO))
count++;
}
return count;
}
#endif
Reference in New Issue View Git Blame Copy Permalink