pruning broken board

Signed-off-by: Ronald G Minnich <rminnich@gmail.com>

mainboards/intel/generic/.gitignore

@@ -1,9 +0,0 @@
-image.bin
-initramfs.linux_amd64.cpio
-initramfs.linux_amd64.cpio.lzma
-kernel
-kernel.xz
-linux
-*kernel
-*cpio
-sr630.bin

mainboards/intel/generic/Makefile

@@ -1,103 +0,0 @@
-MAJOR ?= 5
-STABLE = $(MAJOR).15
-CONFIG ?= $(MAJOR).15.0
-default: build
-
-build:
-	echo fetch, uroot, kernel, or image.bin
-
-image.bin: flashkernel
-	utk \
-		  -xzPath  /usr/bin/xz \
-		ROM.bin \
-	        remove Ip.*  \
-                remove Tcp.*  \
-                remove Usb.*  \
-                remove Udp.*  \
-                remove Dhcp.*  \
-                remove .np.*  \
-                remove .tftp.*  \
-                remove Http.* \
-                remove .*Dns.* \
-                remove Arp.* \
-                remove .*NetworkStackSetupScreen.*  \
-                remove Iscsi.* \
-                remove Scsi.* \
-                remove Fat.* \
-                remove Ahci.* \
-                remove Partition.* \
-                remove Sata.* \
-                remove Disk.* \
-                remove Whea.* \
-                remove .*Pxe.* \
-                remove Ata.* \
-		remove AMITSE \
-		replace_pe32 FullShell flashkernel  \
-	save image.bin
-
-cpukernel: cpu.cpio.lzma cpu.config
-	cp cpu.config linux/.config
-	(cd linux && make oldconfig && make -j32)
-	cp linux/arch/x86/boot/bzImage $@
-# this target builds an initramfs with only one program, the cpu server.
-# It depends on the kernel setting the IP address.
-# You need ip=dhcp OR ip=fixed.ip.address.here in the command line
-cpu.cpio.lzma: Makefile
-	u-root -o cpu.cpio -build=bb -initcmd=cpud -files ~/.ssh/cpu_rsa.pub:key.pub \
-		-defaultsh="" \
-		github.com/u-root/cpu/cmds/cpud
-	lzma -f -k cpu.cpio
-
-flashkernel: uroot bzImage
-	cp linux/arch/x86/boot/bzImage flashkernel
-
-netboot: netbooturoot bzImage
-	cp linux/arch/x86/boot/bzImage kernel
-
-readrom:
-	echo You need to get a ROM image from *somewhere*
-	echo Once you do, put it in ROM.bin
-
-writerom: image.bin
-	echo Here is where you would do the flashrom, e.g.
-	echo sudo flashrom -p dediprog -w image.bin
-
-netbooturoot:
-	u-root -build=bb github.com/u-root/u-root/cmds/core/init github.com/u-root/u-root/cmds/core/ls github.com/u-root/u-root/cmds/core/ip   github.com/u-root/u-root/cmds/core/elvish    github.com/u-root/u-root/cmds/core/sshd    github.com/u-root/u-root/cmds/core/scp github.com/u-root/u-root/cmds/boot/*
-	cp /tmp/initramfs.linux_amd64.cpio .
-	lzma -k -f initramfs.linux_amd64.cpio
-	ls -l initramfs*
-	cp *lzma linux
-
-uroot:
-	u-root -build=bb github.com/u-root/u-root/cmds/core/init github.com/u-root/u-root/cmds/exp/rush github.com/u-root/u-root/cmds/core/ls github.com/u-root/u-root/cmds/core/ip   github.com/u-root/u-root/cmds/core/elvish    github.com/u-root/u-root/cmds/core/sshd    github.com/u-root/u-root/cmds/core/scp
-	cp /tmp/initramfs.linux_amd64.cpio .
-	lzma -k -f initramfs.linux_amd64.cpio
-	ls -l initramfs*
-	cp *lzma linux
-
-bzImage:
-	cp config-$(CONFIG) linux/.config
-	(cd linux && make oldconfig && make -j32)
-
-fetch: getkernel geturoot getfiano getrom
-getkernel:
-	rm -rf linux
-	wget -O kernel.xz https://cdn.kernel.org/pub/linux/kernel/v$(MAJOR).x/linux-$(STABLE).tar.xz
-	xzcat kernel.xz | tar x
-	mv linux-$(STABLE) linux
-getfiano:
-	go get -u github.com/linuxboot/fiano/cmds/utk
-	go install github.com/linuxboot/fiano/cmds/utk
-getrom:
-	@echo If you plan to flash to hardware,
-	@echo you will need to get a rom image
-	@echo and put it in rom.bin
-	@echo you can get it via wget, flashrom, whatever.
-	@echo If you are not targeting hardware, you can
-	@echo make flashkernel
-	@echo and run that kernel via qemu
-
-geturoot:
-	go get -u github.com/u-root/u-root
-