linuxboot/patches/flashrom-0.9.9.patch
Trammell Hudson 8589370708
Flash writing from userspace works (issue #17).
Reduce the size of flashrom by commenting out most flash chips,
boards and programmers.

Wrapper script to make it easier to rewrite the ROM on the x230
using the flashrom layout.

Keep the entire 12 MB ROM for flashing.
2017-03-30 17:12:22 -04:00

199 lines
9.3 KiB
Diff

diff -u --recursive ../clean/flashrom-0.9.9/board_enable.c flashrom-0.9.9/board_enable.c
--- ../clean/flashrom-0.9.9/board_enable.c 2016-03-13 11:16:30.000000000 -0400
+++ flashrom-0.9.9/board_enable.c 2017-03-30 16:50:21.727748288 -0400
@@ -2305,6 +2305,7 @@
/* first pci-id set [4], second pci-id set [4], dmi identifier, coreboot id [2], phase, vendor name, board name max_rom_... OK? flash enable */
#if defined(__i386__) || defined(__x86_64__)
+#if 0
{0x10DE, 0x0547, 0x147B, 0x1C2F, 0x10DE, 0x0548, 0x147B, 0x1C2F, NULL, NULL, NULL, P3, "abit", "AN-M2", 0, NT, nvidia_mcp_gpio2_raise},
{0x1106, 0x0282, 0x147B, 0x1415, 0x1106, 0x3227, 0x147B, 0x1415, "^AV8 ", NULL, NULL, P3, "abit", "AV8", 0, OK, board_abit_av8},
{0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, NULL /* "^I440BX-W977$" */, "abit", "bf6", P3, "abit", "BF6", 0, OK, intel_piix4_gpo26_lower},
@@ -2427,6 +2428,7 @@
{0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^SE440BX-2$", NULL, NULL, P3, "Intel", "SE440BX-2", 0, NT, intel_piix4_gpo27_lower},
{0x1022, 0x7468, 0, 0, 0x1022, 0x7460, 0, 0, NULL, "iwill", "dk8_htx", P3, "IWILL", "DK8-HTX", 0, OK, w83627hf_gpio24_raise_2e},
{0x8086, 0x27A0, 0x8086, 0x27a0, 0x8086, 0x27b8, 0x8086, 0x27b8, NULL, "kontron", "986lcd-m", P3, "Kontron", "986LCD-M", 0, OK, board_kontron_986lcd_m},
+#endif
{0x8086, 0x2917, 0x17AA, 0x20F5, 0x8086, 0x2930, 0x17AA, 0x20F9, "^ThinkPad T400", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T400", 0, OK, p2_whitelist_laptop},
{0x8086, 0x1E22, 0x17AA, 0x21F6, 0x8086, 0x1E55, 0x17AA, 0x21F6, "^ThinkPad T530", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T530", 0, OK, p2_whitelist_laptop},
{0x8086, 0x27a0, 0x17aa, 0x2015, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad T60", 0, OK, p2_whitelist_laptop},
@@ -2435,6 +2437,7 @@
{0x8086, 0x3B07, 0x17AA, 0x2166, 0x8086, 0x3B30, 0x17AA, 0x2167, "^Lenovo X201", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X201", 0, OK, p2_whitelist_laptop},
{0x8086, 0x1E22, 0x17AA, 0x21FA, 0x8086, 0x1E55, 0x17AA, 0x21FA, "^ThinkPad X230", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X230", 0, OK, p2_whitelist_laptop},
{0x8086, 0x27A0, 0x17AA, 0x2017, 0x8086, 0x27B9, 0x17AA, 0x2009, "^ThinkPad X60", NULL, NULL, P2, "IBM/Lenovo", "ThinkPad X60(s)", 0, OK, p2_whitelist_laptop},
+#if 0
{0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, P3, "Mitac", "6513WU", 0, OK, board_mitac_6513wu},
{0x8086, 0x8186, 0x8086, 0x8186, 0x8086, 0x8800, 0, 0, "^MSC Vertriebs GmbH$", NULL, NULL, P2, "MSC", "Q7-TCTC", 0, OK, p2_not_a_laptop},
{0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^MS-6163 (i440BX)$", NULL, NULL, P3, "MSI", "MS-6163 (MS-6163 Pro)", 0, OK, intel_piix4_gpo14_raise},
@@ -2470,6 +2473,7 @@
{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, NULL, P3, "VIA", "EPIA M/MII/...", 0, OK, via_vt823x_gpio15_raise},
{0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, NULL, P3, "VIA", "EPIA-N/NL", 0, OK, via_vt823x_gpio9_raise},
#endif
+#endif
{ 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, P3, NULL, NULL, 0, NT, NULL}, /* end marker */
};
diff -u --recursive ../clean/flashrom-0.9.9/chipset_enable.c flashrom-0.9.9/chipset_enable.c
--- ../clean/flashrom-0.9.9/chipset_enable.c 2016-01-23 11:16:49.000000000 -0500
+++ flashrom-0.9.9/chipset_enable.c 2017-03-30 16:46:10.496413767 -0400
@@ -1482,6 +1482,7 @@
/* Please keep this list numerically sorted by vendor/device ID. */
const struct penable chipset_enables[] = {
#if defined(__i386__) || defined(__x86_64__)
+#if 0
{0x1002, 0x4377, OK, "ATI", "SB400", enable_flash_sb400},
{0x1002, 0x438d, OK, "AMD", "SB600", enable_flash_sb600},
{0x1002, 0x439d, OK, "AMD", "SB7x0/SB8x0/SB9x0", enable_flash_sb600},
@@ -1624,7 +1625,9 @@
{0x8086, 0x1e49, DEP, "Intel", "B75", enable_flash_pch7},
{0x8086, 0x1e4a, DEP, "Intel", "H77", enable_flash_pch7},
{0x8086, 0x1e53, NT, "Intel", "C216", enable_flash_pch7},
+#endif
{0x8086, 0x1e55, DEP, "Intel", "QM77", enable_flash_pch7},
+#if 0
{0x8086, 0x1e56, NT, "Intel", "QS77", enable_flash_pch7},
{0x8086, 0x1e57, DEP, "Intel", "HM77", enable_flash_pch7},
{0x8086, 0x1e58, NT, "Intel", "UM77", enable_flash_pch7},
@@ -1786,6 +1789,7 @@
{0x8086, 0x9d48, BAD, "Intel", "Sunrise Point (Skylake-U Premium)", NULL},
{0x8086, 0x9d46, BAD, "Intel", "Sunrise Point (Skylake-Y Premium)", NULL},
#endif
+#endif
{0},
};
diff -u --recursive ../clean/flashrom-0.9.9/flashchips.c flashrom-0.9.9/flashchips.c
--- ../clean/flashrom-0.9.9/flashchips.c 2016-03-13 11:16:30.000000000 -0400
+++ flashrom-0.9.9/flashchips.c 2017-03-30 16:44:00.474681255 -0400
@@ -33,7 +33,7 @@
* alphabetically sorted. Within families keep them in order of density.
*/
const struct flashchip flashchips[] = {
-
+#if 0
/*
* .vendor = Vendor name
* .name = Chip name
@@ -15902,6 +15902,7 @@
.feature_bits = 0,
.block_erasers = {},
},
+#endif
{
.vendor = "Programmer",
@@ -15925,6 +15926,7 @@
.read = read_opaque,
},
+#if 0
{
.vendor = "AMIC",
.name = "unknown AMIC SPI chip",
@@ -16085,6 +16087,7 @@
.probe = probe_spi_rems,
.write = NULL,
},
+#endif
{0}
};
diff -u --recursive ../clean/flashrom-0.9.9/flashrom.c flashrom-0.9.9/flashrom.c
--- ../clean/flashrom-0.9.9/flashrom.c 2016-02-22 03:59:27.000000000 -0500
+++ flashrom-0.9.9/flashrom.c 2017-03-30 16:06:35.121301300 -0400
@@ -1983,7 +1983,7 @@
uint8_t *newcontents;
int ret = 0;
unsigned long size = flash->chip->total_size * 1024;
- int read_all_first = 1; /* FIXME: Make this configurable. */
+ int read_all_first = 0; /* FIXME: Make this configurable. */
if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) {
msg_cerr("Aborting.\n");
diff -u --recursive ../clean/flashrom-0.9.9/layout.c flashrom-0.9.9/layout.c
--- ../clean/flashrom-0.9.9/layout.c 2016-03-13 13:36:49.000000000 -0400
+++ flashrom-0.9.9/layout.c 2017-03-30 16:28:31.853958644 -0400
@@ -259,6 +259,7 @@
static int copy_old_content(struct flashctx *flash, int oldcontents_valid, uint8_t *oldcontents, uint8_t *newcontents, unsigned int start, unsigned int size)
{
+#if 0
if (!oldcontents_valid) {
/* oldcontents is a zero-filled buffer. By reading the current data into oldcontents here, we
* avoid a rewrite of identical regions even if an initial full chip read didn't happen. */
@@ -269,6 +270,7 @@
return 1;
}
}
+#endif
memcpy(newcontents + start, oldcontents + start, size);
return 0;
}
diff -u --recursive ../clean/flashrom-0.9.9/print.c flashrom-0.9.9/print.c
--- ../clean/flashrom-0.9.9/print.c 2016-03-13 11:16:30.000000000 -0400
+++ flashrom-0.9.9/print.c 2017-03-30 15:40:11.681082983 -0400
@@ -518,6 +518,7 @@
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_known[] = {
+#if 0
#if defined(__i386__) || defined(__x86_64__)
B("A-Trend", "ATC-6220", OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
B("abit", "A-S78H", OK, NULL, NULL),
@@ -1140,12 +1141,13 @@
B("ZOTAC", "ZBOX AD02 (PLUS)", OK, NULL, NULL),
B("ZOTAC", "ZBOX HD-ID11", OK, NULL, NULL),
#endif
-
+#endif
{0},
};
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info laptops_known[] = {
+#if 0
#if defined(__i386__) || defined(__x86_64__)
B("Acer", "Aspire 1520", OK, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspire1520nv.shtml", NULL),
B("Acer", "Aspire One", BAD, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
@@ -1174,6 +1176,7 @@
//B("MSI", "GT60-2OD", OK, "http://www.msi.com/product/nb/GT60_2OD.html", NULL), requires layout patches
B("Teclast", "X98 Air 3G", OK, NULL, NULL),
#endif
+#endif
{0},
};
diff -u --recursive ../clean/flashrom-0.9.9/spi.c flashrom-0.9.9/spi.c
--- ../clean/flashrom-0.9.9/spi.c 2014-07-19 18:03:29.000000000 -0400
+++ flashrom-0.9.9/spi.c 2017-03-30 15:10:38.192254930 -0400
@@ -100,6 +100,20 @@
return spi_write_chunked(flash, buf, start, len, max_data);
}
+static int my_ffs(int x)
+{
+ int rc = 0;
+ while(x)
+ {
+ if (x & 1)
+ return rc;
+ rc++;
+ x >>= 1;
+ }
+
+ return 0;
+}
+
int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start,
unsigned int len)
{
@@ -119,7 +133,7 @@
/* Check if alignment is native (at least the largest power of two which
* is a factor of the mapped size of the chip).
*/
- if (ffs(flash->chip->total_size * 1024) > (ffs(addrbase) ? : 33)) {
+ if (my_ffs(flash->chip->total_size * 1024) > (my_ffs(addrbase) ? : 33)) {
msg_perr("Flash chip is not aligned natively in the allowed "
"access window.\n");
msg_perr("Read will probably return garbage.\n");