/* Copyright 2023 Dual Tachyon * https://github.com/DualTachyon * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef DISABLE_AIRCOPY #include "app/aircopy.h" #include "audio.h" #include "driver/bk4819.h" #include "driver/crc.h" #include "driver/eeprom.h" #include "frequencies.h" #include "misc.h" #include "radio.h" #include "ui/helper.h" #include "ui/inputbox.h" #include "ui/ui.h" static const uint16_t Obfuscation[8] = {0x6C16, 0xE614, 0x912E, 0x400D, 0x3521, 0x40D5, 0x0313, 0x80E9}; AIRCOPY_State_t gAircopyState; uint16_t gAirCopyBlockNumber; uint16_t gErrorsDuringAirCopy; uint8_t gAirCopyIsSendMode; uint16_t g_FSK_Buffer[36]; void AIRCOPY_SendMessage(void) { unsigned int i; g_FSK_Buffer[1] = (gAirCopyBlockNumber & 0x3FF) << 6; EEPROM_ReadBuffer(g_FSK_Buffer[1], &g_FSK_Buffer[2], 64); g_FSK_Buffer[34] = CRC_Calculate(&g_FSK_Buffer[1], 2 + 64); for (i = 0; i < 34; i++) g_FSK_Buffer[i + 1] ^= Obfuscation[i % 8]; if (++gAirCopyBlockNumber >= 0x78) gAircopyState = AIRCOPY_COMPLETE; RADIO_SetTxParameters(); BK4819_SendFSKData(g_FSK_Buffer); BK4819_SetupPowerAmplifier(0, 0); BK4819_ToggleGpioOut(BK4819_GPIO5_PIN1, false); gAircopySendCountdown = 30; } void AIRCOPY_StorePacket(void) { uint16_t Status; if (gFSKWriteIndex < 36) return; gFSKWriteIndex = 0; gUpdateDisplay = true; Status = BK4819_ReadRegister(BK4819_REG_0B); BK4819_PrepareFSKReceive(); // Doc says bit 4 should be 1 = CRC OK, 0 = CRC FAIL, but original firmware checks for FAIL. if ((Status & 0x0010U) == 0 && g_FSK_Buffer[0] == 0xABCD && g_FSK_Buffer[35] == 0xDCBA) { uint16_t CRC; unsigned int i; for (i = 0; i < 34; i++) g_FSK_Buffer[i + 1] ^= Obfuscation[i % 8]; CRC = CRC_Calculate(&g_FSK_Buffer[1], 2 + 64); if (g_FSK_Buffer[34] == CRC) { const uint16_t *pData; uint16_t Offset; Offset = g_FSK_Buffer[1]; if (Offset < 0x1E00) { pData = &g_FSK_Buffer[2]; for (i = 0; i < 8; i++) { EEPROM_WriteBuffer(Offset, pData); pData += 4; Offset += 8; } if (Offset == 0x1E00) gAircopyState = AIRCOPY_COMPLETE; gAirCopyBlockNumber++; return; } } } gErrorsDuringAirCopy++; } static void AIRCOPY_Key_DIGITS(KEY_Code_t Key, bool bKeyPressed, bool bKeyHeld) { if (!bKeyHeld && bKeyPressed) { uint32_t Frequency; unsigned int i; INPUTBOX_Append(Key); gRequestDisplayScreen = DISPLAY_AIRCOPY; if (gInputBoxIndex < 6) { #ifndef DISABLE_VOICE gAnotherVoiceID = (VOICE_ID_t)Key; #endif return; } gInputBoxIndex = 0; NUMBER_Get(gInputBox, &Frequency); for (i = 0; i < 7; i++) { if (Frequency >= gLowerLimitFrequencyBandTable[i] && Frequency <= gUpperLimitFrequencyBandTable[i]) { #ifndef DISABLE_VOICE gAnotherVoiceID = (VOICE_ID_t)Key; #endif gRxVfo->Band = i; Frequency += 75; Frequency = FREQUENCY_FloorToStep(Frequency, gRxVfo->StepFrequency, 0); gRxVfo->ConfigRX.Frequency = Frequency; gRxVfo->ConfigTX.Frequency = Frequency; RADIO_ConfigureSquelchAndOutputPower(gRxVfo); gCurrentVfo = gRxVfo; RADIO_SetupRegisters(true); BK4819_SetupAircopy(); BK4819_ResetFSK(); return; } } gRequestDisplayScreen = DISPLAY_AIRCOPY; } } static void AIRCOPY_Key_EXIT(bool bKeyPressed, bool bKeyHeld) { if (!bKeyHeld && bKeyPressed) { if (gInputBoxIndex == 0) { gFSKWriteIndex = 0; gAirCopyBlockNumber = 0; gErrorsDuringAirCopy = 0; gInputBoxIndex = 0; gAirCopyIsSendMode = 0; BK4819_PrepareFSKReceive(); gAircopyState = AIRCOPY_TRANSFER; } else gInputBox[--gInputBoxIndex] = 10; gRequestDisplayScreen = DISPLAY_AIRCOPY; } } static void AIRCOPY_Key_MENU(bool bKeyPressed, bool bKeyHeld) { if (!bKeyHeld && bKeyPressed) { gFSKWriteIndex = 0; gAirCopyBlockNumber = 0; gInputBoxIndex = 0; gAirCopyIsSendMode = 1; g_FSK_Buffer[0] = 0xABCD; g_FSK_Buffer[1] = 0; g_FSK_Buffer[35] = 0xDCBA; AIRCOPY_SendMessage(); GUI_DisplayScreen(); gAircopyState = AIRCOPY_TRANSFER; } } void AIRCOPY_ProcessKeys(KEY_Code_t Key, bool bKeyPressed, bool bKeyHeld) { switch (Key) { case KEY_0: case KEY_1: case KEY_2: case KEY_3: case KEY_4: case KEY_5: case KEY_6: case KEY_7: case KEY_8: case KEY_9: AIRCOPY_Key_DIGITS(Key, bKeyPressed, bKeyHeld); break; case KEY_MENU: AIRCOPY_Key_MENU(bKeyPressed, bKeyHeld); break; case KEY_EXIT: AIRCOPY_Key_EXIT(bKeyPressed, bKeyHeld); break; default: break; } } #endif