# Copyright 2023 Dual Tachyon # https://github.com/DualTachyon # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. [SYSCON] @ = 0x40000000, 0x800 CLK_SEL = 0x0000 > SYS, 0, 1 = RCHF, 0 = DIV_CLK, 1 > DIV, 1, 3 = 1, 0 = 2, 1 = 4, 2 = 8, 3 = 16, 4 = 32, 5 > SRC, 4, 3 = RCHF, 0 = RCLF, 1 = XTAH, 2 = XTAL, 3 = PLL, 4 > W_PLL, 7, 1 = RCHF, 0 = XTAH, 1 # The documentation doesn't match the firmware! > R_SARADC_SMPL, 9, 2 = DIV1, 0 = DIV2, 1 = DIV4, 2 = DIV8, 3 > W_SARADC_SMPL, 10, 2 = DIV1, 0 = DIV2, 1 = DIV4, 2 = DIV8, 3 > R_PLL, 11, 1 = RCHF, 0 = XTAH, 1 DIV_CLK_GATE = 0x0004 > DIV_CLK_GATE, 0, 1 = DISABLE, 0 = ENABLE, 1 DEV_CLK_GATE = 0x0008 > GPIOA, 0, 1 = DISABLE, 0 = ENABLE, 1 > GPIOB, 1, 1 = DISABLE, 0 = ENABLE, 1 > GPIOC, 2, 1 = DISABLE, 0 = ENABLE, 1 > IIC0, 4, 1 = DISABLE, 0 = ENABLE, 1 > IIC1, 5, 1 = DISABLE, 0 = ENABLE, 1 > UART0, 6, 1 = DISABLE, 0 = ENABLE, 1 > UART1, 7, 1 = DISABLE, 0 = ENABLE, 1 > UART2, 8, 1 = DISABLE, 0 = ENABLE, 1 > SPI0, 10, 1 = DISABLE, 0 = ENABLE, 1 > SPI1, 11, 1 = DISABLE, 0 = ENABLE, 1 > TIMER_BASE0, 12, 1 = DISABLE, 0 = ENABLE, 1 > TIMER_BASE1, 13, 1 = DISABLE, 0 = ENABLE, 1 > TIMER_BASE2, 14, 1 = DISABLE, 0 = ENABLE, 1 > TIMER_PLUS0, 15, 1 = DISABLE, 0 = ENABLE, 1 > TIMER_PLUS1, 16, 1 = DISABLE, 0 = ENABLE, 1 > PWM_BASE0, 17, 1 = DISABLE, 0 = ENABLE, 1 > PWM_BASE1, 18, 1 = DISABLE, 0 = ENABLE, 1 > PWM_PLUS0, 20, 1 = DISABLE, 0 = ENABLE, 1 > PWM_PLUS1, 21, 1 = DISABLE, 0 = ENABLE, 1 > RTC, 22, 1 = DISABLE, 0 = ENABLE, 1 > IWDT, 23, 1 = DISABLE, 0 = ENABLE, 1 > WWDT, 24, 1 = DISABLE, 0 = ENABLE, 1 > SARADC, 25, 1 = DISABLE, 0 = ENABLE, 1 > CRC, 27, 1 = DISABLE, 0 = ENABLE, 1 > AES, 28, 1 = DISABLE, 0 = ENABLE, 1 RC_FREQ_DELTA = 0x0078 > RCLF_DELTA, 0, 10 > RCLF_SIG, 10, 1 > RCHF_DELTA, 11, 20 > RCHF_SIG, 31, 1 VREF_VOLT_DELTA = 0x007C CHIP_ID0 = 0x0080 CHIP_ID1 = 0x0084 CHIP_ID2 = 0x0088 CHIP_ID3 = 0x008C