/* Copyright 2023 Dual Tachyon * https://github.com/DualTachyon * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include #ifdef ENABLE_FMRADIO #include "app/fm.h" #endif #include "driver/eeprom.h" #include "driver/uart.h" #include "misc.h" #include "settings.h" EEPROM_Config_t gEeprom; #ifdef ENABLE_FMRADIO void SETTINGS_SaveFM(void) { unsigned int i; struct { uint16_t Frequency; uint8_t Channel; bool IsChannelSelected; uint8_t Padding[4]; } State; memset(&State, 0xFF, sizeof(State)); State.Channel = gEeprom.FM_SelectedChannel; State.Frequency = gEeprom.FM_SelectedFrequency; State.IsChannelSelected = gEeprom.FM_IsMrMode; EEPROM_WriteBuffer(0x0E88, &State); for (i = 0; i < 5; i++) EEPROM_WriteBuffer(0x0E40 + (i * 8), &gFM_Channels[i * 4]); } #endif void SETTINGS_SaveVfoIndices(void) { uint8_t State[8]; #ifndef ENABLE_NOAA EEPROM_ReadBuffer(0x0E80, State, sizeof(State)); #endif State[0] = gEeprom.ScreenChannel[0]; State[1] = gEeprom.MrChannel[0]; State[2] = gEeprom.FreqChannel[0]; State[3] = gEeprom.ScreenChannel[1]; State[4] = gEeprom.MrChannel[1]; State[5] = gEeprom.FreqChannel[1]; #ifdef ENABLE_NOAA State[6] = gEeprom.NoaaChannel[0]; State[7] = gEeprom.NoaaChannel[1]; #endif EEPROM_WriteBuffer(0x0E80, State); } void SETTINGS_SaveSettings(void) { uint8_t State[8]; uint32_t Password[2]; State[0] = gEeprom.CHAN_1_CALL; State[1] = gEeprom.SQUELCH_LEVEL; State[2] = gEeprom.TX_TIMEOUT_TIMER; #ifdef ENABLE_NOAA State[3] = gEeprom.NOAA_AUTO_SCAN; #else State[3] = false; #endif State[4] = gEeprom.KEY_LOCK; #ifdef ENABLE_VOX State[5] = gEeprom.VOX_SWITCH; State[6] = gEeprom.VOX_LEVEL; #else State[5] = false; State[6] = 0; #endif State[7] = gEeprom.MIC_SENSITIVITY; EEPROM_WriteBuffer(0x0E70, State); State[0] = (gEeprom.BACKLIGHT_MIN << 4) + gEeprom.BACKLIGHT_MAX; State[1] = gEeprom.CHANNEL_DISPLAY_MODE; State[2] = gEeprom.CROSS_BAND_RX_TX; State[3] = gEeprom.BATTERY_SAVE; State[4] = gEeprom.DUAL_WATCH; State[5] = gEeprom.BACKLIGHT_TIME; State[6] = gEeprom.TAIL_TONE_ELIMINATION; State[7] = gEeprom.VFO_OPEN; EEPROM_WriteBuffer(0x0E78, State); State[0] = gEeprom.BEEP_CONTROL; State[0] |= gEeprom.KEY_M_LONG_PRESS_ACTION << 1; State[1] = gEeprom.KEY_1_SHORT_PRESS_ACTION; State[2] = gEeprom.KEY_1_LONG_PRESS_ACTION; State[3] = gEeprom.KEY_2_SHORT_PRESS_ACTION; State[4] = gEeprom.KEY_2_LONG_PRESS_ACTION; State[5] = gEeprom.SCAN_RESUME_MODE; State[6] = gEeprom.AUTO_KEYPAD_LOCK; State[7] = gEeprom.POWER_ON_DISPLAY_MODE; EEPROM_WriteBuffer(0x0E90, State); memset(Password, 0xFF, sizeof(Password)); #ifdef ENABLE_PWRON_PASSWORD Password[0] = gEeprom.POWER_ON_PASSWORD; #endif EEPROM_WriteBuffer(0x0E98, Password); memset(State, 0xFF, sizeof(State)); #ifdef ENABLE_VOICE State[0] = gEeprom.VOICE_PROMPT; EEPROM_WriteBuffer(0x0EA0, State); #endif #if defined(ENABLE_ALARM) || defined(ENABLE_TX1750) State[0] = gEeprom.ALARM_MODE; #else State[0] = false; #endif State[1] = gEeprom.ROGER; State[2] = gEeprom.REPEATER_TAIL_TONE_ELIMINATION; State[3] = gEeprom.TX_VFO; State[4] = gEeprom.BATTERY_TYPE; EEPROM_WriteBuffer(0x0EA8, State); State[0] = gEeprom.DTMF_SIDE_TONE; State[1] = gEeprom.DTMF_SEPARATE_CODE; State[2] = gEeprom.DTMF_GROUP_CALL_CODE; State[3] = gEeprom.DTMF_DECODE_RESPONSE; State[4] = gEeprom.DTMF_auto_reset_time; State[5] = gEeprom.DTMF_PRELOAD_TIME / 10U; State[6] = gEeprom.DTMF_FIRST_CODE_PERSIST_TIME / 10U; State[7] = gEeprom.DTMF_HASH_CODE_PERSIST_TIME / 10U; EEPROM_WriteBuffer(0x0ED0, State); memset(State, 0xFF, sizeof(State)); State[0] = gEeprom.DTMF_CODE_PERSIST_TIME / 10U; State[1] = gEeprom.DTMF_CODE_INTERVAL_TIME / 10U; State[2] = gEeprom.PERMIT_REMOTE_KILL; EEPROM_WriteBuffer(0x0ED8, State); State[0] = gEeprom.SCAN_LIST_DEFAULT; State[1] = gEeprom.SCAN_LIST_ENABLED[0]; State[2] = gEeprom.SCANLIST_PRIORITY_CH1[0]; State[3] = gEeprom.SCANLIST_PRIORITY_CH2[0]; State[4] = gEeprom.SCAN_LIST_ENABLED[1]; State[5] = gEeprom.SCANLIST_PRIORITY_CH1[1]; State[6] = gEeprom.SCANLIST_PRIORITY_CH2[1]; State[7] = 0xFF; EEPROM_WriteBuffer(0x0F18, State); memset(State, 0xFF, sizeof(State)); State[0] = gSetting_F_LOCK; State[1] = gSetting_350TX; State[2] = gSetting_KILLED; State[3] = gSetting_200TX; State[4] = gSetting_500TX; State[5] = gSetting_350EN; State[6] = gSetting_ScrambleEnable; if (!gSetting_TX_EN) State[7] &= ~(1u << 0); if (!gSetting_live_DTMF_decoder) State[7] &= ~(1u << 1); State[7] = (State[7] & ~(3u << 2)) | ((gSetting_battery_text & 3u) << 2); #ifdef ENABLE_AUDIO_BAR if (!gSetting_mic_bar) State[7] &= ~(1u << 4); #endif #ifdef ENABLE_AM_FIX if (!gSetting_AM_fix) State[7] &= ~(1u << 5); #endif State[7] = (State[7] & ~(3u << 6)) | ((gSetting_backlight_on_tx_rx & 3u) << 6); EEPROM_WriteBuffer(0x0F40, State); } void SETTINGS_SaveChannel(uint8_t Channel, uint8_t VFO, const VFO_Info_t *pVFO, uint8_t Mode) { #ifdef ENABLE_NOAA if (!IS_NOAA_CHANNEL(Channel)) #endif { const uint16_t OffsetMR = Channel * 16; uint16_t OffsetVFO = OffsetMR; if (!IS_MR_CHANNEL(Channel)) { // it's a VFO, not a channel OffsetVFO = (VFO == 0) ? 0x0C80 : 0x0C90; OffsetVFO += (Channel - FREQ_CHANNEL_FIRST) * 32; } if (Mode >= 2 || !IS_MR_CHANNEL(Channel)) { // copy VFO to a channel uint8_t State[8]; ((uint32_t *)State)[0] = pVFO->freq_config_RX.Frequency; ((uint32_t *)State)[1] = pVFO->TX_OFFSET_FREQUENCY; EEPROM_WriteBuffer(OffsetVFO + 0, State); State[0] = pVFO->freq_config_RX.Code; State[1] = pVFO->freq_config_TX.Code; State[2] = (pVFO->freq_config_TX.CodeType << 4) | pVFO->freq_config_RX.CodeType; State[3] = (pVFO->Modulation << 4) | pVFO->TX_OFFSET_FREQUENCY_DIRECTION; State[4] = 0 | (pVFO->BUSY_CHANNEL_LOCK << 4) | (pVFO->OUTPUT_POWER << 2) | (pVFO->CHANNEL_BANDWIDTH << 1) | (pVFO->FrequencyReverse << 0); State[5] = ((pVFO->DTMF_PTT_ID_TX_MODE & 7u) << 1) | ((pVFO->DTMF_DECODING_ENABLE & 1u) << 0); State[6] = pVFO->STEP_SETTING; State[7] = pVFO->SCRAMBLING_TYPE; EEPROM_WriteBuffer(OffsetVFO + 8, State); SETTINGS_UpdateChannel(Channel, pVFO, true); if (IS_MR_CHANNEL(Channel)) { // it's a memory channel #ifndef ENABLE_KEEP_MEM_NAME // clear/reset the channel name //memset(&State, 0xFF, sizeof(State)); memset(&State, 0x00, sizeof(State)); // follow the QS way EEPROM_WriteBuffer(0x0F50 + OffsetMR, State); EEPROM_WriteBuffer(0x0F58 + OffsetMR, State); #else if (Mode >= 3) { // save the channel name memmove(State, pVFO->Name + 0, 8); EEPROM_WriteBuffer(0x0F50 + OffsetMR, State); //memset(State, 0xFF, sizeof(State)); memset(State, 0x00, sizeof(State)); // follow the QS way memmove(State, pVFO->Name + 8, 2); EEPROM_WriteBuffer(0x0F58 + OffsetMR, State); } #endif } } } } void SETTINGS_SaveBatteryCalibration(const uint16_t * batteryCalibration) { uint16_t buf[4]; EEPROM_WriteBuffer(0x1F40, batteryCalibration); EEPROM_ReadBuffer( 0x1F48, buf, sizeof(buf)); buf[0] = batteryCalibration[4]; buf[1] = batteryCalibration[5]; EEPROM_WriteBuffer(0x1F48, buf); } void SETTINGS_UpdateChannel(uint8_t Channel, const VFO_Info_t *pVFO, bool keep) { #ifdef ENABLE_NOAA if (!IS_NOAA_CHANNEL(Channel)) #endif { uint8_t State[8]; uint8_t Attributes = 0xFF; // default attributes uint16_t Offset = 0x0D60 + (Channel & ~7u); Attributes &= (uint8_t)(~MR_CH_COMPAND); // default to '0' = compander disabled EEPROM_ReadBuffer(Offset, State, sizeof(State)); if (keep) { Attributes = (pVFO->SCANLIST1_PARTICIPATION << 7) | (pVFO->SCANLIST2_PARTICIPATION << 6) | (pVFO->Compander << 4) | (pVFO->Band << 0); if (State[Channel & 7u] == Attributes) return; // no change in the attributes } State[Channel & 7u] = Attributes; EEPROM_WriteBuffer(Offset, State); gMR_ChannelAttributes[Channel] = Attributes; // #ifndef ENABLE_KEEP_MEM_NAME if (IS_MR_CHANNEL(Channel)) { // it's a memory channel const uint16_t OffsetMR = Channel * 16; if (!keep) { // clear/reset the channel name //memset(&State, 0xFF, sizeof(State)); memset(&State, 0x00, sizeof(State)); // follow the QS way EEPROM_WriteBuffer(0x0F50 + OffsetMR, State); EEPROM_WriteBuffer(0x0F58 + OffsetMR, State); } // else // { // update the channel name // memmove(State, pVFO->Name + 0, 8); // EEPROM_WriteBuffer(0x0F50 + OffsetMR, State); // //memset(State, 0xFF, sizeof(State)); // memset(State, 0x00, sizeof(State)); // follow the QS way // memmove(State, pVFO->Name + 8, 2); // EEPROM_WriteBuffer(0x0F58 + OffsetMR, State); // } } // #endif } }