/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#include <stdbool.h>
#include "bsp/dp32g030/dma.h"
#include "bsp/dp32g030/syscon.h"
#include "bsp/dp32g030/uart.h"
#include "driver/uart.h"

static bool UART_IsLogEnabled;
uint8_t UART_DMA_Buffer[256];

void UART_Init(void)
{
	uint32_t Delta;
	uint32_t Positive;
	uint32_t Frequency;

	UART1->CTRL = (UART1->CTRL & ~UART_CTRL_UARTEN_MASK) | UART_CTRL_UARTEN_BITS_DISABLE;
	Delta = SYSCON_RC_FREQ_DELTA;
	Positive = (Delta & SYSCON_RC_FREQ_DELTA_RCHF_SIG_MASK) >> SYSCON_RC_FREQ_DELTA_RCHF_SIG_SHIFT;
	Frequency = (Delta & SYSCON_RC_FREQ_DELTA_RCHF_DELTA_MASK) >> SYSCON_RC_FREQ_DELTA_RCHF_DELTA_SHIFT;
	if (Positive) {
		Frequency += 48000000U;
	} else {
		Frequency = 48000000U - Frequency;
	}

	UART1->BAUD = Frequency / 39053U;
	UART1->CTRL = UART_CTRL_RXEN_BITS_ENABLE | UART_CTRL_TXEN_BITS_ENABLE | UART_CTRL_RXDMAEN_BITS_ENABLE;
	UART1->RXTO = 4;
	UART1->FC = 0;
	UART1->FIFO = UART_FIFO_RF_LEVEL_BITS_8_BYTE | UART_FIFO_RF_CLR_BITS_ENABLE | UART_FIFO_TF_CLR_BITS_ENABLE;
	UART1->IE = 0;

	DMA_CTR = (DMA_CTR & ~DMA_CTR_DMAEN_MASK) | DMA_CTR_DMAEN_BITS_DISABLE;

	DMA_CH0->MSADDR = (uint32_t)(uintptr_t)&UART1->RDR;
	DMA_CH0->MDADDR = (uint32_t)(uintptr_t)UART_DMA_Buffer;
	DMA_CH0->MOD = 0
		// Source
		| DMA_CH_MOD_MS_ADDMOD_BITS_NONE
		| DMA_CH_MOD_MS_SIZE_BITS_8BIT
		| DMA_CH_MOD_MS_SEL_BITS_HSREQ_MS1
		// Destination
		| DMA_CH_MOD_MD_ADDMOD_BITS_INCREMENT
		| DMA_CH_MOD_MD_SIZE_BITS_8BIT
		| DMA_CH_MOD_MD_SEL_BITS_SRAM
		;
	DMA_INTEN = 0;
	DMA_INTST = 0
		| DMA_INTST_CH0_TC_INTST_BITS_SET
		| DMA_INTST_CH1_TC_INTST_BITS_SET
		| DMA_INTST_CH2_TC_INTST_BITS_SET
		| DMA_INTST_CH3_TC_INTST_BITS_SET
		| DMA_INTST_CH0_THC_INTST_BITS_SET
		| DMA_INTST_CH1_THC_INTST_BITS_SET
		| DMA_INTST_CH2_THC_INTST_BITS_SET
		| DMA_INTST_CH3_THC_INTST_BITS_SET
		;
	DMA_CH0->CTR = 0
		| DMA_CH_CTR_CH_EN_BITS_ENABLE
		| ((0xFF << DMA_CH_CTR_LENGTH_SHIFT) & DMA_CH_CTR_LENGTH_MASK)
		| DMA_CH_CTR_LOOP_BITS_ENABLE
		| DMA_CH_CTR_PRI_BITS_MEDIUM
		;
	UART1->IF = UART_IF_RXTO_BITS_SET;

	DMA_CTR = (DMA_CTR & ~DMA_CTR_DMAEN_MASK) | DMA_CTR_DMAEN_BITS_ENABLE;

	UART1->CTRL |= UART_CTRL_UARTEN_BITS_ENABLE;
}

void UART_Send(const void *pBuffer, uint32_t Size)
{
	const uint8_t *pData = (const uint8_t *)pBuffer;
	uint32_t i;

	for (i = 0; i < Size; i++) {
		UART1->TDR = pData[i];
		while ((UART1->IF & UART_IF_TXFIFO_FULL_MASK) != UART_IF_TXFIFO_FULL_BITS_NOT_SET) {
		}
	}
}

void UART_LogSend(const void *pBuffer, uint32_t Size)
{
	if (UART_IsLogEnabled) {
		UART_Send(pBuffer, Size);
	}
}