uv-k5-firmware-custom/settings.h

249 lines
6.4 KiB
C

/* Copyright 2023 Dual Tachyon
* https://github.com/DualTachyon
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef SETTINGS_H
#define SETTINGS_H
#include <stdbool.h>
#include <stdint.h>
#include "frequencies.h"
#include <helper/battery.h>
#include "radio.h"
enum POWER_OnDisplayMode_t {
POWER_ON_DISPLAY_MODE_FULL_SCREEN = 0,
POWER_ON_DISPLAY_MODE_MESSAGE,
POWER_ON_DISPLAY_MODE_VOLTAGE,
POWER_ON_DISPLAY_MODE_NONE
};
typedef enum POWER_OnDisplayMode_t POWER_OnDisplayMode_t;
enum {
F_LOCK_OFF = 0,
F_LOCK_FCC,
F_LOCK_CE,
F_LOCK_GB,
F_LOCK_430,
F_LOCK_438
};
enum {
SCAN_RESUME_TO = 0,
SCAN_RESUME_CO,
SCAN_RESUME_SE
};
enum {
CROSS_BAND_OFF = 0,
CROSS_BAND_CHAN_A,
CROSS_BAND_CHAN_B
};
enum {
DUAL_WATCH_OFF = 0,
DUAL_WATCH_CHAN_A,
DUAL_WATCH_CHAN_B
};
enum {
TX_OFFSET_FREQUENCY_DIRECTION_OFF = 0,
TX_OFFSET_FREQUENCY_DIRECTION_ADD,
TX_OFFSET_FREQUENCY_DIRECTION_SUB
};
enum {
OUTPUT_POWER_LOW = 0,
OUTPUT_POWER_MID,
OUTPUT_POWER_HIGH
};
enum {
ACTION_OPT_NONE = 0,
ACTION_OPT_FLASHLIGHT,
ACTION_OPT_POWER,
ACTION_OPT_MONITOR,
ACTION_OPT_SCAN,
ACTION_OPT_VOX,
ACTION_OPT_ALARM,
ACTION_OPT_FM,
ACTION_OPT_1750,
ACTION_OPT_KEYLOCK,
ACTION_OPT_A_B,
ACTION_OPT_VFO_MR,
ACTION_OPT_LEN
};
#ifdef ENABLE_VOICE
enum VOICE_Prompt_t
{
VOICE_PROMPT_OFF = 0,
VOICE_PROMPT_CHINESE,
VOICE_PROMPT_ENGLISH
};
typedef enum VOICE_Prompt_t VOICE_Prompt_t;
#endif
enum ALARM_Mode_t {
ALARM_MODE_SITE = 0,
ALARM_MODE_TONE
};
typedef enum ALARM_Mode_t ALARM_Mode_t;
enum ROGER_Mode_t {
ROGER_MODE_OFF = 0,
ROGER_MODE_ROGER,
ROGER_MODE_MDC
};
typedef enum ROGER_Mode_t ROGER_Mode_t;
enum CHANNEL_DisplayMode_t {
MDF_FREQUENCY = 0,
MDF_CHANNEL,
MDF_NAME,
MDF_NAME_FREQ
};
typedef enum CHANNEL_DisplayMode_t CHANNEL_DisplayMode_t;
typedef struct {
uint8_t ScreenChannel[2];
uint8_t FreqChannel[2];
uint8_t MrChannel[2];
#ifdef ENABLE_NOAA
uint8_t NoaaChannel[2];
#endif
// The actual VFO index (0-upper/1-lower) that is now used for RX,
// It is being alternated by dual watch, and flipped by crossband
uint8_t RX_VFO;
// The main VFO index (0-upper/1-lower) selected by the user
//
uint8_t TX_VFO;
uint8_t field7_0xa;
uint8_t field8_0xb;
#ifdef ENABLE_FMRADIO
uint16_t FM_SelectedFrequency;
uint8_t FM_SelectedChannel;
bool FM_IsMrMode;
uint16_t FM_FrequencyPlaying;
uint16_t FM_LowerLimit;
uint16_t FM_UpperLimit;
#endif
uint8_t SQUELCH_LEVEL;
uint8_t TX_TIMEOUT_TIMER;
bool KEY_LOCK;
bool VOX_SWITCH;
uint8_t VOX_LEVEL;
#ifdef ENABLE_VOICE
VOICE_Prompt_t VOICE_PROMPT;
#endif
bool BEEP_CONTROL;
uint8_t CHANNEL_DISPLAY_MODE;
bool TAIL_TONE_ELIMINATION;
bool VFO_OPEN;
uint8_t DUAL_WATCH;
uint8_t CROSS_BAND_RX_TX;
uint8_t BATTERY_SAVE;
uint8_t BACKLIGHT_TIME;
uint8_t SCAN_RESUME_MODE;
uint8_t SCAN_LIST_DEFAULT;
bool SCAN_LIST_ENABLED[2];
uint8_t SCANLIST_PRIORITY_CH1[2];
uint8_t SCANLIST_PRIORITY_CH2[2];
uint8_t field29_0x26;
uint8_t field30_0x27;
uint8_t field37_0x32;
uint8_t field38_0x33;
bool AUTO_KEYPAD_LOCK;
#if defined(ENABLE_ALARM) || defined(ENABLE_TX1750)
ALARM_Mode_t ALARM_MODE;
#endif
POWER_OnDisplayMode_t POWER_ON_DISPLAY_MODE;
ROGER_Mode_t ROGER;
uint8_t REPEATER_TAIL_TONE_ELIMINATION;
uint8_t KEY_1_SHORT_PRESS_ACTION;
uint8_t KEY_1_LONG_PRESS_ACTION;
uint8_t KEY_2_SHORT_PRESS_ACTION;
uint8_t KEY_2_LONG_PRESS_ACTION;
uint8_t MIC_SENSITIVITY;
uint8_t MIC_SENSITIVITY_TUNING;
uint8_t CHAN_1_CALL;
char ANI_DTMF_ID[8];
char KILL_CODE[8];
char REVIVE_CODE[8];
char DTMF_UP_CODE[16];
uint8_t field57_0x6c;
uint8_t field58_0x6d;
char DTMF_DOWN_CODE[16];
uint8_t field60_0x7e;
uint8_t field61_0x7f;
char DTMF_SEPARATE_CODE;
char DTMF_GROUP_CALL_CODE;
uint8_t DTMF_DECODE_RESPONSE;
uint8_t DTMF_auto_reset_time;
uint16_t DTMF_PRELOAD_TIME;
uint16_t DTMF_FIRST_CODE_PERSIST_TIME;
uint16_t DTMF_HASH_CODE_PERSIST_TIME;
uint16_t DTMF_CODE_PERSIST_TIME;
uint16_t DTMF_CODE_INTERVAL_TIME;
bool DTMF_SIDE_TONE;
bool PERMIT_REMOTE_KILL;
int16_t BK4819_XTAL_FREQ_LOW;
#ifdef ENABLE_NOAA
bool NOAA_AUTO_SCAN;
#endif
uint8_t VOLUME_GAIN;
uint8_t DAC_GAIN;
VFO_Info_t VfoInfo[2];
uint32_t POWER_ON_PASSWORD;
uint16_t VOX1_THRESHOLD;
uint16_t VOX0_THRESHOLD;
uint8_t field77_0x95;
uint8_t field78_0x96;
uint8_t field79_0x97;
uint8_t KEY_M_LONG_PRESS_ACTION;
uint8_t BACKLIGHT_MIN;
uint8_t BACKLIGHT_MAX;
BATTERY_Type_t BATTERY_TYPE;
} EEPROM_Config_t;
extern EEPROM_Config_t gEeprom;
#ifdef ENABLE_FMRADIO
void SETTINGS_SaveFM(void);
#endif
void SETTINGS_SaveVfoIndices(void);
void SETTINGS_SaveSettings(void);
void SETTINGS_SaveChannel(uint8_t Channel, uint8_t VFO, const VFO_Info_t *pVFO, uint8_t Mode);
void SETTINGS_SaveBatteryCalibration(const uint16_t * batteryCalibration);
void SETTINGS_UpdateChannel(uint8_t Channel, const VFO_Info_t *pVFO, bool keep);
#endif