New detailed key-spec flags (RO, RW, OW, RM, ACCESS, UPDATE, INSERT, DELETE) (#10122)
The new ACL key based permissions in #9974 require the key-specs (#8324) to have more
explicit flags rather than just READ and WRITE. See discussion in #10040
This PR defines two groups of flags:
One about how redis internally handles the key (mutually-exclusive).
The other is about the logical operation done from the user's point of view (3 mutually exclusive
write flags, and one read flag, all optional).
In both groups, if we can't explicitly flag something as explicit read-only, delete-only, or
insert-only, we flag it as `RW` or `UPDATE`.
here's the definition from the code:
```
/* Key-spec flags *
* -------------- */
/* The following refer what the command actually does with the value or metadata
* of the key, and not necessarily the user data or how it affects it.
* Each key-spec may must have exaclty one of these. Any operation that's not
* distinctly deletion, overwrite or read-only would be marked as RW. */
#define CMD_KEY_RO (1ULL<<0) /* Read-Only - Reads the value of the key, but
* doesn't necessarily returns it. */
#define CMD_KEY_RW (1ULL<<1) /* Read-Write - Modifies the data stored in the
* value of the key or its metadata. */
#define CMD_KEY_OW (1ULL<<2) /* Overwrite - Overwrites the data stored in
* the value of the key. */
#define CMD_KEY_RM (1ULL<<3) /* Deletes the key. */
/* The follwing refer to user data inside the value of the key, not the metadata
* like LRU, type, cardinality. It refers to the logical operation on the user's
* data (actual input strings / TTL), being used / returned / copied / changed,
* It doesn't refer to modification or returning of metadata (like type, count,
* presence of data). Any write that's not INSERT or DELETE, would be an UPADTE.
* Each key-spec may have one of the writes with or without access, or none: */
#define CMD_KEY_ACCESS (1ULL<<4) /* Returns, copies or uses the user data from
* the value of the key. */
#define CMD_KEY_UPDATE (1ULL<<5) /* Updates data to the value, new value may
* depend on the old value. */
#define CMD_KEY_INSERT (1ULL<<6) /* Adds data to the value with no chance of,
* modification or deletion of existing data. */
#define CMD_KEY_DELETE (1ULL<<7) /* Explicitly deletes some content
* from the value of the key. */
```
Unrelated changes:
- generate-command-code.py is only compatible with python3 (modified the shabang)
- generate-command-code.py print file on json parsing error
- rename `shard_channel` key-spec flag to just `channel`.
- add INCOMPLETE flag in input spec of SORT and SORT_RO
2022-01-18 14:00:00 +00:00
#!/usr/bin/env python3
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
import glob
import json
2022-05-27 09:58:00 +00:00
import os
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
import argparse
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
ARG_TYPES = {
" string " : " ARG_TYPE_STRING " ,
" integer " : " ARG_TYPE_INTEGER " ,
" double " : " ARG_TYPE_DOUBLE " ,
" key " : " ARG_TYPE_KEY " ,
" pattern " : " ARG_TYPE_PATTERN " ,
" unix-time " : " ARG_TYPE_UNIX_TIME " ,
" pure-token " : " ARG_TYPE_PURE_TOKEN " ,
" oneof " : " ARG_TYPE_ONEOF " ,
" block " : " ARG_TYPE_BLOCK " ,
}
GROUPS = {
" generic " : " COMMAND_GROUP_GENERIC " ,
" string " : " COMMAND_GROUP_STRING " ,
" list " : " COMMAND_GROUP_LIST " ,
" set " : " COMMAND_GROUP_SET " ,
" sorted_set " : " COMMAND_GROUP_SORTED_SET " ,
" hash " : " COMMAND_GROUP_HASH " ,
" pubsub " : " COMMAND_GROUP_PUBSUB " ,
" transactions " : " COMMAND_GROUP_TRANSACTIONS " ,
" connection " : " COMMAND_GROUP_CONNECTION " ,
" server " : " COMMAND_GROUP_SERVER " ,
" scripting " : " COMMAND_GROUP_SCRIPTING " ,
" hyperloglog " : " COMMAND_GROUP_HYPERLOGLOG " ,
" cluster " : " COMMAND_GROUP_CLUSTER " ,
" sentinel " : " COMMAND_GROUP_SENTINEL " ,
" geo " : " COMMAND_GROUP_GEO " ,
" stream " : " COMMAND_GROUP_STREAM " ,
" bitmap " : " COMMAND_GROUP_BITMAP " ,
}
2022-01-19 14:07:28 +00:00
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def get_optional_desc_string ( desc , field , force_uppercase = False ) :
v = desc . get ( field , None )
if v and force_uppercase :
v = v . upper ( )
2022-01-19 14:07:28 +00:00
ret = " \" %s \" " % v if v else " NULL "
return ret . replace ( " \n " , " \\ n " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
2022-05-27 09:58:00 +00:00
def check_command_args_key_specs ( args , command_key_specs_index_set , command_arg_key_specs_index_set ) :
if not args :
return True
for arg in args :
if arg . key_spec_index is not None :
assert isinstance ( arg . key_spec_index , int )
if arg . key_spec_index not in command_key_specs_index_set :
print ( " command: %s arg: %s key_spec_index error " % ( command . fullname ( ) , arg . name ) )
return False
command_arg_key_specs_index_set . add ( arg . key_spec_index )
if not check_command_args_key_specs ( arg . subargs , command_key_specs_index_set , command_arg_key_specs_index_set ) :
return False
return True
def check_command_key_specs ( command ) :
if not command . key_specs :
return True
assert isinstance ( command . key_specs , list )
for cmd_key_spec in command . key_specs :
if " flags " not in cmd_key_spec :
print ( " command: %s key_specs missing flags " % command . fullname ( ) )
return False
if " NOT_KEY " in cmd_key_spec [ " flags " ] :
# Like SUNSUBSCRIBE / SPUBLISH / SSUBSCRIBE
return True
command_key_specs_index_set = set ( range ( len ( command . key_specs ) ) )
command_arg_key_specs_index_set = set ( )
# Collect key_spec used for each arg, including arg.subarg
if not check_command_args_key_specs ( command . args , command_key_specs_index_set , command_arg_key_specs_index_set ) :
return False
# Check if we have key_specs not used
if command_key_specs_index_set != command_arg_key_specs_index_set :
print ( " command: %s may have unused key_spec " % command . fullname ( ) )
return False
return True
2022-01-19 14:07:28 +00:00
# Globals
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
subcommands = { } # container_name -> dict(subcommand_name -> Subcommand) - Only subcommands
commands = { } # command_name -> Command - Only commands
class KeySpec ( object ) :
def __init__ ( self , spec ) :
self . spec = spec
def struct_code ( self ) :
def _flags_code ( ) :
s = " "
for flag in self . spec . get ( " flags " , [ ] ) :
s + = " CMD_KEY_ %s | " % flag
return s [ : - 1 ] if s else 0
def _begin_search_code ( ) :
if self . spec [ " begin_search " ] . get ( " index " ) :
return " KSPEC_BS_INDEX,.bs.index= { %d } " % (
self . spec [ " begin_search " ] [ " index " ] [ " pos " ]
)
elif self . spec [ " begin_search " ] . get ( " keyword " ) :
return " KSPEC_BS_KEYWORD,.bs.keyword= { \" %s \" , %d } " % (
self . spec [ " begin_search " ] [ " keyword " ] [ " keyword " ] ,
self . spec [ " begin_search " ] [ " keyword " ] [ " startfrom " ] ,
)
elif " unknown " in self . spec [ " begin_search " ] :
return " KSPEC_BS_UNKNOWN, {{ 0}} "
else :
print ( " Invalid begin_search! value= %s " % self . spec [ " begin_search " ] )
exit ( 1 )
def _find_keys_code ( ) :
if self . spec [ " find_keys " ] . get ( " range " ) :
return " KSPEC_FK_RANGE,.fk.range= { %d , %d , %d } " % (
self . spec [ " find_keys " ] [ " range " ] [ " lastkey " ] ,
self . spec [ " find_keys " ] [ " range " ] [ " step " ] ,
self . spec [ " find_keys " ] [ " range " ] [ " limit " ]
)
elif self . spec [ " find_keys " ] . get ( " keynum " ) :
return " KSPEC_FK_KEYNUM,.fk.keynum= { %d , %d , %d } " % (
self . spec [ " find_keys " ] [ " keynum " ] [ " keynumidx " ] ,
self . spec [ " find_keys " ] [ " keynum " ] [ " firstkey " ] ,
self . spec [ " find_keys " ] [ " keynum " ] [ " step " ]
)
elif " unknown " in self . spec [ " find_keys " ] :
return " KSPEC_FK_UNKNOWN, {{ 0}} "
else :
print ( " Invalid find_keys! value= %s " % self . spec [ " find_keys " ] )
exit ( 1 )
2022-01-30 10:00:03 +00:00
return " %s , %s , %s , %s " % (
get_optional_desc_string ( self . spec , " notes " ) ,
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
_flags_code ( ) ,
_begin_search_code ( ) ,
_find_keys_code ( )
)
2022-08-18 12:09:36 +00:00
def verify_no_dup_names ( container_fullname , args ) :
name_list = [ arg . name for arg in args ]
name_set = set ( name_list )
if len ( name_list ) != len ( name_set ) :
print ( " {} : Dup argument names: {} " . format ( container_fullname , name_list ) )
exit ( 1 )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
class Argument ( object ) :
def __init__ ( self , parent_name , desc ) :
2022-08-18 12:09:36 +00:00
self . parent_name = parent_name
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
self . desc = desc
self . name = self . desc [ " name " ] . lower ( )
2022-08-18 12:09:36 +00:00
if " _ " in self . name :
print ( " {} : name ( {} ) should not contain underscores " . format ( self . fullname ( ) , self . name ) )
exit ( 1 )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
self . type = self . desc [ " type " ]
2022-05-27 09:58:00 +00:00
self . key_spec_index = self . desc . get ( " key_spec_index " , None )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
self . subargs = [ ]
if self . type in [ " oneof " , " block " ] :
2022-08-18 12:09:36 +00:00
self . display = None
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
for subdesc in self . desc [ " arguments " ] :
self . subargs . append ( Argument ( self . fullname ( ) , subdesc ) )
2022-08-18 12:09:36 +00:00
if len ( self . subargs ) < 2 :
print ( " {} : oneof or block arg contains less than two subargs " . format ( self . fullname ( ) ) )
exit ( 1 )
verify_no_dup_names ( self . fullname ( ) , self . subargs )
else :
self . display = self . desc . get ( " display " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def fullname ( self ) :
return ( " %s %s " % ( self . parent_name , self . name ) ) . replace ( " - " , " _ " )
def struct_name ( self ) :
return " %s _Arg " % ( self . fullname ( ) . replace ( " " , " _ " ) )
def subarg_table_name ( self ) :
assert self . subargs
return " %s _Subargs " % ( self . fullname ( ) . replace ( " " , " _ " ) )
def struct_code ( self ) :
"""
Output example :
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
MAKE_ARG ( " expiration " , ARG_TYPE_ONEOF , - 1 , NULL , NULL , NULL , CMD_ARG_OPTIONAL , 5 , NULL ) , . subargs = GETEX_expiration_Subargs
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
"""
2022-01-19 14:07:28 +00:00
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def _flags_code ( ) :
s = " "
if self . desc . get ( " optional " , False ) :
s + = " CMD_ARG_OPTIONAL| "
if self . desc . get ( " multiple " , False ) :
s + = " CMD_ARG_MULTIPLE| "
if self . desc . get ( " multiple_token " , False ) :
assert self . desc . get ( " multiple " , False ) # Sanity
s + = " CMD_ARG_MULTIPLE_TOKEN| "
return s [ : - 1 ] if s else " CMD_ARG_NONE "
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
s = " MAKE_ARG( \" %s \" , %s , %d , %s , %s , %s , %s , %d , %s ) " % (
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
self . name ,
ARG_TYPES [ self . type ] ,
self . desc . get ( " key_spec_index " , - 1 ) ,
get_optional_desc_string ( self . desc , " token " , force_uppercase = True ) ,
get_optional_desc_string ( self . desc , " summary " ) ,
get_optional_desc_string ( self . desc , " since " ) ,
_flags_code ( ) ,
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
len ( self . subargs ) ,
get_optional_desc_string ( self . desc , " deprecated_since " ) ,
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
)
2022-08-18 12:09:36 +00:00
if " display " in self . desc :
s + = " ,.display_text= \" %s \" " % self . desc [ " display " ] . lower ( )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
if self . subargs :
s + = " ,.subargs= %s " % self . subarg_table_name ( )
return s
def write_internal_structs ( self , f ) :
if self . subargs :
for subarg in self . subargs :
subarg . write_internal_structs ( f )
f . write ( " /* %s argument table */ \n " % self . fullname ( ) )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " struct COMMAND_ARG %s [] = { \n " % self . subarg_table_name ( ) )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
for subarg in self . subargs :
f . write ( " { %s }, \n " % subarg . struct_code ( ) )
f . write ( " }; \n \n " )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
def to_c_name ( str ) :
return str . replace ( " : " , " " ) . replace ( " . " , " _ " ) . replace ( " $ " , " _ " ) \
2024-03-02 19:26:05 +00:00
. replace ( " ^ " , " _ " ) . replace ( " * " , " _ " ) . replace ( " - " , " _ " ) \
. replace ( " \\ " , " _ " ) . replace ( " + " , " _ " )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
class ReplySchema ( object ) :
def __init__ ( self , name , desc ) :
self . name = to_c_name ( name )
self . schema = { }
if desc . get ( " type " ) == " object " :
if desc . get ( " properties " ) and desc . get ( " additionalProperties " ) is None :
2023-03-17 12:20:54 +00:00
print ( " %s : Any object that has properties should have the additionalProperties field " % self . name )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
exit ( 1 )
elif desc . get ( " type " ) == " array " :
if desc . get ( " items " ) and isinstance ( desc [ " items " ] , list ) and any ( [ desc . get ( k ) is None for k in [ " minItems " , " maxItems " ] ] ) :
2023-03-17 12:20:54 +00:00
print ( " %s : Any array that has items should have the minItems and maxItems fields " % self . name )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
exit ( 1 )
for k , v in desc . items ( ) :
if isinstance ( v , dict ) :
self . schema [ k ] = ReplySchema ( " %s _ %s " % ( self . name , k ) , v )
elif isinstance ( v , list ) :
self . schema [ k ] = [ ]
for i , subdesc in enumerate ( v ) :
self . schema [ k ] . append ( ReplySchema ( " %s _ %s _ %i " % ( self . name , k , i ) , subdesc ) )
else :
self . schema [ k ] = v
def write ( self , f ) :
def struct_code ( name , k , v ) :
if isinstance ( v , ReplySchema ) :
t = " JSON_TYPE_OBJECT "
vstr = " .value.object=& %s " % name
elif isinstance ( v , list ) :
t = " JSON_TYPE_ARRAY "
vstr = " .value.array= { .objects= %s ,.length= %d } " % ( name , len ( v ) )
elif isinstance ( v , bool ) :
t = " JSON_TYPE_BOOLEAN "
vstr = " .value.boolean= %d " % int ( v )
elif isinstance ( v , str ) :
t = " JSON_TYPE_STRING "
vstr = " .value.string= \" %s \" " % v
elif isinstance ( v , int ) :
t = " JSON_TYPE_INTEGER "
vstr = " .value.integer= %d " % v
2024-03-02 19:26:05 +00:00
return " %s , %s , %s " % ( t , json . dumps ( k ) , vstr )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
for k , v in self . schema . items ( ) :
if isinstance ( v , ReplySchema ) :
v . write ( f )
elif isinstance ( v , list ) :
for i , schema in enumerate ( v ) :
schema . write ( f )
name = to_c_name ( " %s _ %s " % ( self . name , k ) )
f . write ( " /* %s array reply schema */ \n " % name )
f . write ( " struct jsonObject * %s [] = { \n " % name )
for i , schema in enumerate ( v ) :
f . write ( " & %s , \n " % schema . name )
f . write ( " }; \n \n " )
f . write ( " /* %s reply schema */ \n " % self . name )
f . write ( " struct jsonObjectElement %s _elements[] = { \n " % self . name )
for k , v in self . schema . items ( ) :
name = to_c_name ( " %s _ %s " % ( self . name , k ) )
f . write ( " { %s }, \n " % struct_code ( name , k , v ) )
f . write ( " }; \n \n " )
f . write ( " struct jsonObject %s = { %s _elements,.length= %d }; \n \n " % ( self . name , self . name , len ( self . schema ) ) )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
class Command ( object ) :
def __init__ ( self , name , desc ) :
self . name = name . upper ( )
self . desc = desc
self . group = self . desc [ " group " ]
2022-05-27 09:58:00 +00:00
self . key_specs = self . desc . get ( " key_specs " , [ ] )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
self . subcommands = [ ]
self . args = [ ]
for arg_desc in self . desc . get ( " arguments " , [ ] ) :
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
self . args . append ( Argument ( self . fullname ( ) , arg_desc ) )
2022-08-18 12:09:36 +00:00
verify_no_dup_names ( self . fullname ( ) , self . args )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
self . reply_schema = None
if " reply_schema " in self . desc :
self . reply_schema = ReplySchema ( self . reply_schema_name ( ) , self . desc [ " reply_schema " ] )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def fullname ( self ) :
return self . name . replace ( " - " , " _ " ) . replace ( " : " , " " )
def return_types_table_name ( self ) :
return " %s _ReturnInfo " % self . fullname ( ) . replace ( " " , " _ " )
def subcommand_table_name ( self ) :
assert self . subcommands
return " %s _Subcommands " % self . name
def history_table_name ( self ) :
return " %s _History " % ( self . fullname ( ) . replace ( " " , " _ " ) )
2022-01-20 09:32:11 +00:00
def tips_table_name ( self ) :
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
return " %s _Tips " % ( self . fullname ( ) . replace ( " " , " _ " ) )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def arg_table_name ( self ) :
return " %s _Args " % ( self . fullname ( ) . replace ( " " , " _ " ) )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
def key_specs_table_name ( self ) :
return " %s _Keyspecs " % ( self . fullname ( ) . replace ( " " , " _ " ) )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
def reply_schema_name ( self ) :
return " %s _ReplySchema " % ( self . fullname ( ) . replace ( " " , " _ " ) )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def struct_name ( self ) :
return " %s _Command " % ( self . fullname ( ) . replace ( " " , " _ " ) )
def history_code ( self ) :
if not self . desc . get ( " history " ) :
return " "
s = " "
for tupl in self . desc [ " history " ] :
s + = " { \" %s \" , \" %s \" }, \n " % ( tupl [ 0 ] , tupl [ 1 ] )
return s
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
def num_history ( self ) :
if not self . desc . get ( " history " ) :
return 0
return len ( self . desc [ " history " ] )
2022-01-20 09:32:11 +00:00
def tips_code ( self ) :
if not self . desc . get ( " command_tips " ) :
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
return " "
s = " "
2022-01-20 09:32:11 +00:00
for hint in self . desc [ " command_tips " ] :
s + = " \" %s \" , \n " % hint . lower ( )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
return s
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
def num_tips ( self ) :
if not self . desc . get ( " command_tips " ) :
return 0
return len ( self . desc [ " command_tips " ] )
def key_specs_code ( self ) :
s = " "
for spec in self . key_specs :
s + = " { %s }, " % KeySpec ( spec ) . struct_code ( )
return s [ : - 1 ]
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def struct_code ( self ) :
"""
Output example :
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
MAKE_CMD ( " set " , " Set the string value of a key " , " O(1) " , " 1.0.0 " , CMD_DOC_NONE , NULL , NULL , " string " , COMMAND_GROUP_STRING , SET_History , 4 , SET_Tips , 0 , setCommand , - 3 , CMD_WRITE | CMD_DENYOOM , ACL_CATEGORY_STRING , SET_Keyspecs , 1 , setGetKeys , 5 ) , . args = SET_Args
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
"""
2022-01-19 14:07:28 +00:00
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
def _flags_code ( ) :
s = " "
for flag in self . desc . get ( " command_flags " , [ ] ) :
s + = " CMD_ %s | " % flag
return s [ : - 1 ] if s else 0
def _acl_categories_code ( ) :
s = " "
for cat in self . desc . get ( " acl_categories " , [ ] ) :
s + = " ACL_CATEGORY_ %s | " % cat
return s [ : - 1 ] if s else 0
def _doc_flags_code ( ) :
s = " "
for flag in self . desc . get ( " doc_flags " , [ ] ) :
s + = " CMD_DOC_ %s | " % flag
return s [ : - 1 ] if s else " CMD_DOC_NONE "
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
s = " MAKE_CMD( \" %s \" , %s , %s , %s , %s , %s , %s , %s , %s , %s , %d , %s , %d , %s , %d , %s , %s , %s , %d , %s , %d ), " % (
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
self . name . lower ( ) ,
get_optional_desc_string ( self . desc , " summary " ) ,
get_optional_desc_string ( self . desc , " complexity " ) ,
get_optional_desc_string ( self . desc , " since " ) ,
_doc_flags_code ( ) ,
get_optional_desc_string ( self . desc , " replaced_by " ) ,
get_optional_desc_string ( self . desc , " deprecated_since " ) ,
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
" \" %s \" " % self . group ,
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
GROUPS [ self . group ] ,
self . history_table_name ( ) ,
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
self . num_history ( ) ,
2022-01-20 09:32:11 +00:00
self . tips_table_name ( ) ,
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
self . num_tips ( ) ,
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
self . desc . get ( " function " , " NULL " ) ,
self . desc [ " arity " ] ,
_flags_code ( ) ,
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
_acl_categories_code ( ) ,
self . key_specs_table_name ( ) ,
len ( self . key_specs ) ,
self . desc . get ( " get_keys_function " , " NULL " ) ,
len ( self . args ) ,
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
)
if self . subcommands :
s + = " .subcommands= %s , " % self . subcommand_table_name ( )
if self . args :
s + = " .args= %s , " % self . arg_table_name ( )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
if self . reply_schema and args . with_reply_schema :
s + = " .reply_schema=& %s , " % self . reply_schema_name ( )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
return s [ : - 1 ]
def write_internal_structs ( self , f ) :
if self . subcommands :
2021-12-16 10:54:40 +00:00
subcommand_list = sorted ( self . subcommands , key = lambda cmd : cmd . name )
for subcommand in subcommand_list :
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
subcommand . write_internal_structs ( f )
f . write ( " /* %s command table */ \n " % self . fullname ( ) )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " struct COMMAND_STRUCT %s [] = { \n " % self . subcommand_table_name ( ) )
2021-12-16 10:54:40 +00:00
for subcommand in subcommand_list :
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
f . write ( " { %s }, \n " % subcommand . struct_code ( ) )
f . write ( " {0} \n " )
f . write ( " }; \n \n " )
f . write ( " /********** %s ********************/ \n \n " % self . fullname ( ) )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " #ifndef SKIP_CMD_HISTORY_TABLE \n " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
f . write ( " /* %s history */ \n " % self . fullname ( ) )
code = self . history_code ( )
if code :
f . write ( " commandHistory %s [] = { \n " % self . history_table_name ( ) )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " %s " % code )
f . write ( " }; \n " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
else :
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " #define %s NULL \n " % self . history_table_name ( ) )
f . write ( " #endif \n \n " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " #ifndef SKIP_CMD_TIPS_TABLE \n " )
2022-01-20 09:32:11 +00:00
f . write ( " /* %s tips */ \n " % self . fullname ( ) )
code = self . tips_code ( )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
if code :
2022-01-20 09:32:11 +00:00
f . write ( " const char * %s [] = { \n " % self . tips_table_name ( ) )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " %s " % code )
f . write ( " }; \n " )
else :
f . write ( " #define %s NULL \n " % self . tips_table_name ( ) )
f . write ( " #endif \n \n " )
f . write ( " #ifndef SKIP_CMD_KEY_SPECS_TABLE \n " )
f . write ( " /* %s key specs */ \n " % self . fullname ( ) )
code = self . key_specs_code ( )
if code :
f . write ( " keySpec %s [ %d ] = { \n " % ( self . key_specs_table_name ( ) , len ( self . key_specs ) ) )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
f . write ( " %s \n " % code )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " }; \n " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
else :
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " #define %s NULL \n " % self . key_specs_table_name ( ) )
f . write ( " #endif \n \n " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
if self . args :
for arg in self . args :
arg . write_internal_structs ( f )
f . write ( " /* %s argument table */ \n " % self . fullname ( ) )
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
f . write ( " struct COMMAND_ARG %s [] = { \n " % self . arg_table_name ( ) )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
for arg in self . args :
f . write ( " { %s }, \n " % arg . struct_code ( ) )
f . write ( " }; \n \n " )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
if self . reply_schema and args . with_reply_schema :
self . reply_schema . write ( f )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
class Subcommand ( Command ) :
def __init__ ( self , name , desc ) :
self . container_name = desc [ " container " ] . upper ( )
super ( Subcommand , self ) . __init__ ( name , desc )
def fullname ( self ) :
return " %s %s " % ( self . container_name , self . name . replace ( " - " , " _ " ) . replace ( " : " , " " ) )
def create_command ( name , desc ) :
if desc . get ( " container " ) :
cmd = Subcommand ( name . upper ( ) , desc )
subcommands . setdefault ( desc [ " container " ] . upper ( ) , { } ) [ name ] = cmd
else :
cmd = Command ( name . upper ( ) , desc )
commands [ name . upper ( ) ] = cmd
# MAIN
2021-12-16 10:54:40 +00:00
# Figure out where the sources are
srcdir = os . path . abspath ( os . path . dirname ( os . path . abspath ( __file__ ) ) + " /../src " )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
parser = argparse . ArgumentParser ( )
parser . add_argument ( ' --with-reply-schema ' , action = ' store_true ' )
args = parser . parse_args ( )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
# Create all command objects
print ( " Processing json files... " )
2021-12-16 10:54:40 +00:00
for filename in glob . glob ( ' %s /commands/*.json ' % srcdir ) :
2022-01-19 14:07:28 +00:00
with open ( filename , " r " ) as f :
New detailed key-spec flags (RO, RW, OW, RM, ACCESS, UPDATE, INSERT, DELETE) (#10122)
The new ACL key based permissions in #9974 require the key-specs (#8324) to have more
explicit flags rather than just READ and WRITE. See discussion in #10040
This PR defines two groups of flags:
One about how redis internally handles the key (mutually-exclusive).
The other is about the logical operation done from the user's point of view (3 mutually exclusive
write flags, and one read flag, all optional).
In both groups, if we can't explicitly flag something as explicit read-only, delete-only, or
insert-only, we flag it as `RW` or `UPDATE`.
here's the definition from the code:
```
/* Key-spec flags *
* -------------- */
/* The following refer what the command actually does with the value or metadata
* of the key, and not necessarily the user data or how it affects it.
* Each key-spec may must have exaclty one of these. Any operation that's not
* distinctly deletion, overwrite or read-only would be marked as RW. */
#define CMD_KEY_RO (1ULL<<0) /* Read-Only - Reads the value of the key, but
* doesn't necessarily returns it. */
#define CMD_KEY_RW (1ULL<<1) /* Read-Write - Modifies the data stored in the
* value of the key or its metadata. */
#define CMD_KEY_OW (1ULL<<2) /* Overwrite - Overwrites the data stored in
* the value of the key. */
#define CMD_KEY_RM (1ULL<<3) /* Deletes the key. */
/* The follwing refer to user data inside the value of the key, not the metadata
* like LRU, type, cardinality. It refers to the logical operation on the user's
* data (actual input strings / TTL), being used / returned / copied / changed,
* It doesn't refer to modification or returning of metadata (like type, count,
* presence of data). Any write that's not INSERT or DELETE, would be an UPADTE.
* Each key-spec may have one of the writes with or without access, or none: */
#define CMD_KEY_ACCESS (1ULL<<4) /* Returns, copies or uses the user data from
* the value of the key. */
#define CMD_KEY_UPDATE (1ULL<<5) /* Updates data to the value, new value may
* depend on the old value. */
#define CMD_KEY_INSERT (1ULL<<6) /* Adds data to the value with no chance of,
* modification or deletion of existing data. */
#define CMD_KEY_DELETE (1ULL<<7) /* Explicitly deletes some content
* from the value of the key. */
```
Unrelated changes:
- generate-command-code.py is only compatible with python3 (modified the shabang)
- generate-command-code.py print file on json parsing error
- rename `shard_channel` key-spec flag to just `channel`.
- add INCOMPLETE flag in input spec of SORT and SORT_RO
2022-01-18 14:00:00 +00:00
try :
d = json . load ( f )
for name , desc in d . items ( ) :
create_command ( name , desc )
except json . decoder . JSONDecodeError as err :
print ( " Error processing %s : %s " % ( filename , err ) )
exit ( 1 )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
# Link subcommands to containers
print ( " Linking container command to subcommands... " )
for command in commands . values ( ) :
assert command . group
if command . name not in subcommands :
continue
for subcommand in subcommands [ command . name ] . values ( ) :
assert not subcommand . group or subcommand . group == command . group
subcommand . group = command . group
command . subcommands . append ( subcommand )
2022-05-27 09:58:00 +00:00
check_command_error_counter = 0 # An error counter is used to count errors in command checking.
print ( " Checking all commands... " )
for command in commands . values ( ) :
if not check_command_key_specs ( command ) :
check_command_error_counter + = 1
if check_command_error_counter != 0 :
print ( " Error: There are errors in the commands check, please check the above logs. " )
exit ( 1 )
Add reply_schema to command json files (internal for now) (#10273)
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 08:14:16 +00:00
commands_filename = " commands_with_reply_schema " if args . with_reply_schema else " commands "
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
print ( " Generating %s .def... " % commands_filename )
with open ( " %s / %s .def " % ( srcdir , commands_filename ) , " w " ) as f :
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
f . write ( " /* Automatically generated by %s , do not edit. */ \n \n " % os . path . basename ( __file__ ) )
f . write (
"""
/ * We have fabulous commands from
* the fantastic
2024-04-09 08:24:03 +00:00
* Command Table ! * /
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
2024-04-03 16:29:59 +00:00
/ * Must match serverCommandGroup * /
Reimplement cli hints based on command arg docs (#10515)
Now that the command argument specs are available at runtime (#9656), this PR addresses
#8084 by implementing a complete solution for command-line hinting in `redis-cli`.
It correctly handles nearly every case in Redis's complex command argument definitions, including
`BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
(even when followed by mandatory arguments). It also validates numerically-typed arguments.
It may not correctly handle all possible combinations of those, but overall it is quite robust.
Arguments are only matched after the space bar is typed, so partial word matching is not
supported - that proved to be more confusing than helpful. When the user's current input
cannot be matched against the argument specs, hinting is disabled.
Partial support has been implemented for legacy (pre-7.0) servers that do not support
`COMMAND DOCS`, by falling back to a statically-compiled command argument table.
On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
been sent, in which case the server version will be extracted from the reply to `HELLO`).
The server version will be used to filter the commands and arguments in the command table,
removing those not supported by that version of the server. However, the static table only
includes core Redis commands, so with a legacy server hinting will not be supported for
module commands. The auto generated help.h and the scripts that generates it are gone.
Command and argument tables for the server and CLI use different structs, due primarily
to the need to support different runtime data. In order to generate code for both, macros
have been added to `commands.def` (previously `commands.c`) to make it possible to
configure the code generation differently for different use cases (one linked with redis-server,
and one with redis-cli).
Also adding a basic testing framework for the command hints based on new (undocumented)
command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
`tests/integration/redis-cli.tcl`.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
2023-03-30 16:03:56 +00:00
const char * COMMAND_GROUP_STR [ ] = {
" generic " ,
" string " ,
" list " ,
" set " ,
" sorted-set " ,
" hash " ,
" pubsub " ,
" transactions " ,
" connection " ,
" server " ,
" scripting " ,
" hyperloglog " ,
" cluster " ,
" sentinel " ,
" geo " ,
" stream " ,
" bitmap " ,
" module "
} ;
const char * commandGroupStr ( int index ) {
return COMMAND_GROUP_STR [ index ] ;
}
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
"""
)
command_list = sorted ( commands . values ( ) , key = lambda cmd : ( cmd . group , cmd . name ) )
for command in command_list :
command . write_internal_structs ( f )
f . write ( " /* Main command table */ \n " )
2024-04-04 01:45:23 +00:00
f . write ( " struct COMMAND_STRUCT serverCommandTable[] = { \n " )
Auto-generate the command table from JSON files (#9656)
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
2021-12-15 19:23:15 +00:00
curr_group = None
for command in command_list :
if curr_group != command . group :
curr_group = command . group
f . write ( " /* %s */ \n " % curr_group )
f . write ( " { %s }, \n " % command . struct_code ( ) )
f . write ( " {0} \n " )
f . write ( " }; \n " )
print ( " All done, exiting. " )