MDC PY

.idea/workspace.xml

@@ -22,7 +22,6 @@
   <component name="ChangeListManager">
     <list default="true" id="cea36e80-e289-4d69-9030-7186d540ac0e" name="更改" comment="MDC联系人">
       <change beforePath="$PROJECT_DIR$/.idea/workspace.xml" beforeDir="false" afterPath="$PROJECT_DIR$/.idea/workspace.xml" afterDir="false" />
-      <change beforePath="$PROJECT_DIR$/app/mdc1200.c" beforeDir="false" afterPath="$PROJECT_DIR$/app/mdc1200.c" afterDir="false" />
     </list>
     <option name="SHOW_DIALOG" value="false" />
     <option name="HIGHLIGHT_CONFLICTS" value="true" />
@@ -94,7 +93,7 @@
       <recent name="C:\Users\RUPC\Desktop\UV-K6\uv-k5-firmware-chinese" />
     </key>
   </component>
-  <component name="RunManager" selected="Shell Script.win">
+  <component name="RunManager" selected="Shell Script.win docker">
     <configuration name="clean" type="MAKEFILE_TARGET_RUN_CONFIGURATION" factoryName="Makefile" temporary="true">
       <makefile filename="$PROJECT_DIR$/Makefile" target="clean" workingDirectory="" arguments="">
         <envs />
@@ -187,21 +186,8 @@
       <workItem from="1702006730071" duration="3144000" />
       <workItem from="1702024305901" duration="2385000" />
       <workItem from="1702049513969" duration="28027000" />
-      <workItem from="1702119088204" duration="12440000" />
+      <workItem from="1702119088204" duration="12764000" />
-    </task>
+      <workItem from="1702141572484" duration="2000" />
-    <task id="LOCAL-00034" summary="MDC RX">
-      <created>1701685151218</created>
-      <option name="number" value="00034" />
-      <option name="presentableId" value="LOCAL-00034" />
-      <option name="project" value="LOCAL" />
-      <updated>1701685151218</updated>
-    </task>
-    <task id="LOCAL-00035" summary="MDC RX">
-      <created>1701686694191</created>
-      <option name="number" value="00035" />
-      <option name="presentableId" value="LOCAL-00035" />
-      <option name="project" value="LOCAL" />
-      <updated>1701686694191</updated>
     </task>
     <task id="LOCAL-00036" summary="MDC RX">
       <created>1701687970236</created>
@@ -532,7 +518,21 @@
       <option name="project" value="LOCAL" />
       <updated>1702137966114</updated>
     </task>
-    <option name="localTasksCounter" value="83" />
+    <task id="LOCAL-00083" summary="MDC联系人">
+      <created>1702140031577</created>
+      <option name="number" value="00083" />
+      <option name="presentableId" value="LOCAL-00083" />
+      <option name="project" value="LOCAL" />
+      <updated>1702140031577</updated>
+    </task>
+    <task id="LOCAL-00084" summary="MDC联系人">
+      <created>1702140061105</created>
+      <option name="number" value="00084" />
+      <option name="presentableId" value="LOCAL-00084" />
+      <option name="project" value="LOCAL" />
+      <updated>1702140061106</updated>
+    </task>
+    <option name="localTasksCounter" value="85" />
     <servers />
   </component>
   <component name="TypeScriptGeneratedFilesManager">

MDC_WRITE/MDC.txt

@@ -0,0 +1,15 @@
+542B BG2FZV UVK6 SB
+5438 BG2FZV IS A SB
+4242 I AM SO STUPID
+2B54 I AM A PIG    
+2B2B PIG I AM    HA
+3838 BG2FZV IS DSB 
+5454 WO SHI SHA BI 
+1234 zhu nao wo shi
+7890 ~!@#$%^&*()_+/
+1111 niu bi wo cao 
+2222 sha zi bu hui 
+3333 nao tan       
+4444 chun zhu tou  
+5555 xiao si wo le 
+6666 ji ni tai mei 

MDC_WRITE/main.py

@@ -0,0 +1,271 @@
+import sys
+import re
+import serial
+max_contact=15
+line_count=0
+MDC_ADD= [ 0x1D48, 0x1D88, 0x1DC8,0x1F08]
+MDC_NUM_ADD=0X1D00
+file_out="MDC.txt"
+def payload_xor(payload):
+    XOR_ARRAY = bytes.fromhex('166c14e62e910d402135d5401303e980')
+    XOR_LEN   = len(XOR_ARRAY)
+
+    ba=bytearray(payload)
+    for i in range(0,len(ba)):
+        ba[i] ^= XOR_ARRAY[i%XOR_LEN]
+    return bytes(ba)
+Crc16Tab = [0, 4129, 8258, 12387, 16516, 20645, 24774, 28903, 33032, 37161, 41290, 45419, 49548, 53677, 57806, 61935, 4657, 528, 12915, 8786, 21173, 17044, 29431, 25302,
+            37689, 33560, 45947, 41818, 54205, 50076, 62463, 58334, 9314, 13379, 1056, 5121, 25830, 29895, 17572, 21637, 42346, 46411, 34088, 38153, 58862, 62927, 50604, 54669, 13907,
+            9842, 5649, 1584, 30423, 26358, 22165, 18100, 46939, 42874, 38681, 34616, 63455, 59390, 55197, 51132, 18628, 22757, 26758, 30887, 2112, 6241, 10242, 14371, 51660, 55789,
+            59790, 63919, 35144, 39273, 43274, 47403, 23285, 19156, 31415, 27286, 6769, 2640,14899, 10770, 56317, 52188, 64447, 60318, 39801, 35672, 47931, 43802, 27814, 31879,
+            19684, 23749, 11298, 15363, 3168, 7233, 60846, 64911, 52716, 56781, 44330, 48395,36200, 40265, 32407, 28342, 24277, 20212, 15891, 11826, 7761, 3696, 65439, 61374,
+            57309, 53244, 48923, 44858, 40793, 36728, 37256, 33193, 45514, 41451, 53516, 49453, 61774, 57711, 4224, 161, 12482, 8419, 20484, 16421, 28742, 24679, 33721, 37784, 41979,
+            46042, 49981, 54044, 58239, 62302, 689, 4752, 8947, 13010, 16949, 21012, 25207, 29270, 46570, 42443, 38312, 34185, 62830, 58703, 54572, 50445, 13538, 9411, 5280, 1153, 29798,
+            25671, 21540, 17413, 42971, 47098, 34713, 38840, 59231, 63358, 50973, 55100, 9939, 14066, 1681, 5808, 26199, 30326, 17941, 22068, 55628, 51565, 63758, 59695, 39368,
+            35305, 47498, 43435, 22596, 18533, 30726, 26663, 6336, 2273, 14466, 10403, 52093, 56156, 60223, 64286, 35833, 39896, 43963, 48026, 19061, 23124, 27191, 31254, 2801,
+            6864, 10931, 14994, 64814, 60687, 56684, 52557, 48554, 44427, 40424, 36297, 31782, 27655, 23652, 19525, 15522, 11395, 7392, 3265, 61215, 65342, 53085, 57212, 44955,
+            49082, 36825, 40952, 28183, 32310, 20053, 24180, 11923, 16050, 3793, 7920]
+
+
+def crc16_ccitt(data):
+    i2 = 0
+    for i3 in range(0, len(data)):
+        out = Crc16Tab[((i2 >> 8) ^ data[i3]) & 255]
+        i2 = out ^ (i2 << 8)
+
+    return 65535 & i2
+def convert_payload_to_hex(code):
+    payload_decoded = payload_xor(code[4:-4])  # 跳过头部和尾部的校验信息
+    hex_payload = ' '.join(['{:02X}'.format(byte) for byte in payload_decoded])
+    return hex_payload
+def check_format(line):
+    pattern = r'^[0-9A-Fa-f]{4}\s[\x20-\x7E]{1,14}$'
+    match = re.match(pattern, line)
+    if match:
+        remaining_chars = 14 - len(match.group(0)) + 5  # 计算还需要多少个字符（14个字符长度减去前面已匹配的字符长度和空格）
+        line = line.rstrip() + ' ' * remaining_chars  # 使用空格填充到14个字符长度
+        return line + '\n'  # 返回修改后的行，加上换行符
+    else:
+        print("文件格式错误，请仔细阅读示例！")
+    return None
+
+def update_file(file_path):
+    updated_lines = []
+    with open(file_path, 'r') as file:
+        lines = file.readlines()
+        for line in lines:
+            updated_line = check_format(line.strip())
+            if updated_line is not None:
+                updated_lines.append(updated_line)
+            else:
+                updated_lines.append(line)  # 不符合条件的行保持不变
+
+    # 将修改后的行写回文件
+    with open(file_path, 'w') as file:
+        file.writelines(updated_lines)
+
+def check_duplicates(file_path):
+    lines_seen = set()
+    line_number = 0
+
+    with open(file_path, 'r') as file:
+        for line in file:
+            line_number += 1
+            first_four = line[:4]
+            if first_four in lines_seen:
+                print(f"MDC ID不能重复！！")
+                print(f"重复发现在第 {line_number} 行: {first_four}")
+                input("按 Enter 键退出程序")
+
+                sys.exit()
+            else:
+                lines_seen.add(first_four)
+def time_set():
+    with serial.Serial('COM4', 38400, timeout=1) as ser:
+
+        settime = b'\xAB\xCD\x08\x00\x02\x69\x10\xE6\xAC\xD1\x79\x25\x9D\xAD\xDC\xBA'
+        ser.write(settime)
+        full_response = ser.read(128)
+        if len(full_response) == 0:
+            print("连接失败！")
+            input("按 Enter 键退出程序")
+
+            sys.exit()
+def read_eeprom_byte(add):
+    with serial.Serial('COM4', 38400, timeout=1) as ser:
+        payload = b'\x1B\x05' + b'\x08\x00' + add.to_bytes(2, byteorder='little') + b'\x11\x00' + b'\x82\x40\x74\x65'
+        # 将 payload 中的最后四个字节替换为当前时间戳
+        hex_string = ' '.join(['{:02X}'.format(byte) for byte in payload])
+        crc = crc16_ccitt(payload)
+        payload = payload + bytes([crc & 0xFF, ]) + bytes([crc >> 8, ])  # swap bytes of crc to get little endian
+        message = b'\xAB\xCD' + b'\x0C\x00' + payload_xor(payload) + b'\xDC\xBA'
+        ser.write(message)
+        full_response = ser.read(128)
+        if len(full_response) == 0:
+            print("读取失败！")
+            input("按 Enter 键退出程序")
+
+            sys.exit()
+
+        full_response_hex = full_response.hex()
+        # 将16进制字符串转换为字节串
+        full_response = bytes.fromhex(full_response_hex)
+        # 对payload部分进行解码，然后以两位十六进制输出
+
+        payload_decoded = convert_payload_to_hex(full_response)
+    return payload_decoded[24:26]
+def read_eeprom():
+    num_contact = int( read_eeprom_byte(MDC_NUM_ADD), 16)
+    if num_contact==0 or num_contact>max_contact:
+        print("手台并无设置联系人,请先写入联系人！")
+        input("按 Enter 键退出程序")
+
+        sys.exit()
+    print("开始读取MDC联系人")
+    with open(file_out, 'w+') as file:
+        with serial.Serial('COM4', 38400, timeout=1) as ser:
+                a=0
+                while a<num_contact:
+                    add=MDC_ADD[a//4]+(a%4)*16
+                    a=a+1
+                    print(a*100/num_contact,end='%\n')
+                    payload = b'\x1B\x05' + b'\x08\x00' +add.to_bytes(2, byteorder='little')+b'\x10\x00'+b'\x82\x40\x74\x65'
+                # 将 payload 中的最后四个字节替换为当前时间戳
+                    hex_string = ' '.join(['{:02X}'.format(byte) for byte in payload])
+                    crc = crc16_ccitt(payload)
+                    payload = payload + bytes([crc & 0xFF,]) + bytes([crc>>8,])  #swap bytes of crc to get little endian
+                    message = b'\xAB\xCD' + b'\x0C\x00' + payload_xor(payload) + b'\xDC\xBA'
+                    ser.write(message)
+                    full_response = ser.read(128)
+                    if len(full_response) == 0:
+                        print("读取失败！")
+                        input("按 Enter 键退出程序")
+
+                        sys.exit()
+
+                    full_response_hex = full_response.hex()
+                    # 将16进制字符串转换为字节串
+                    full_response = bytes.fromhex(full_response_hex)
+            # 对payload部分进行解码，然后以两位十六进制输出
+
+                    payload_decoded = convert_payload_to_hex(full_response)
+                    i=0
+                    # 将print的输出定向到文件中
+                    for element in payload_decoded.split(' ')[8:]:
+                        i = i + 1
+                        if i == 3:
+                            file.write(' ')
+                        if i >= 3:
+                            file.write(chr(int(element, 16)))
+                        else:
+                            file.write(element.upper())
+                    file.write('\n')
+    print("读取成功，联系人保存至 MDC联系人.txt")
+    return True
+def write_eeprom_byte(add,num):
+    with serial.Serial('COM4', 38400, timeout=1) as ser:
+        payload = b'\x1D\x05' + b'\x09\x00' + add.to_bytes(2,
+                                                           byteorder='little') + b'\x0F\x00' + b'\x82\x40\x74\x65' +  num.to_bytes(1, byteorder='big')
+        # 将 payload 中的最后四个字节替换为当前时间戳
+        crc = crc16_ccitt(payload)
+        payload = payload + bytes([crc & 0xFF, ]) + bytes([crc >> 8, ])  # swap bytes of crc to get little endian
+        message = b'\xAB\xCD' + b'\x0D\x00' + payload_xor(payload) + b'\xDC\xBA'
+        ser.write(message)
+
+        full_response = ser.read(128)
+        if len(full_response) == 0:
+            print("写入失败！")
+            input("按 Enter 键退出程序")
+
+            sys.exit()
+def write_eeprom_select(a,my_str):
+    with serial.Serial('COM4', 38400, timeout=1) as ser:
+        add = MDC_ADD[a // 4] + (a % 4) * 16
+        payload_data = ''.join(my_str).encode('utf-8')
+        hex1 = int(payload_data[0:2], 16)
+        hex2 = int(payload_data[2:4], 16)
+        payload_data = bytearray([hex1, hex2]) + payload_data[5:]
+        payload = b'\x1D\x05' + b'\x18\x00' + add.to_bytes(2,
+                                                           byteorder='little') + b'\x10\x00' + b'\x82\x40\x74\x65' + payload_data
+        # 将 payload 中的最后四个字节替换为当前时间戳
+        crc = crc16_ccitt(payload)
+        payload = payload + bytes([crc & 0xFF, ]) + bytes([crc >> 8, ])  # swap bytes of crc to get little endian
+        message = b'\xAB\xCD' + b'\x1C\x00' + payload_xor(payload) + b'\xDC\xBA'
+        ser.write(message)
+
+        full_response = ser.read(128)
+        if len(full_response) == 0:
+            print("写入失败！")
+            input("按 Enter 键退出程序")
+
+            sys.exit()
+def deal_blank_line():
+    global line_count  # 声明 line_count 是全局变量
+    with open(file_out, 'r') as file:
+        lines = file.readlines()
+    with open(file_out, 'w') as file:
+        for line in lines:
+            if line.strip():
+                file.write(line)
+    with open(file_out, 'r') as file:
+        line_count = sum(1 for line in file)
+    if line_count==0:
+        print("请填写MDC联系人!")
+        input("按 Enter 键退出程序")
+
+        sys.exit()
+    elif line_count>max_contact:
+        print("MDC联系人数量最大为",max_contact)
+
+
+def write_eeprom():
+    print("正在将MDC联系人.txt写入到手台中")
+    global line_count  # 声明 line_count 是全局变量
+    a=0
+    deal_blank_line()
+    update_file(file_out)
+    with open(file_out, 'r') as file:
+        for line in file:
+            add = MDC_ADD[a // 4] + (a % 4) * 16
+            my_str = []
+            my_str.append(line.replace('\n', ''))  # 去除行尾的换行符
+            write_eeprom_select(a,my_str)
+            print((a+1) * 100 / line_count, end='%\n')
+            a = a + 1
+            if a==line_count:
+                break
+
+    write_eeprom_byte(MDC_NUM_ADD,line_count)
+    print("写入成功")
+    return True
+
+# def main():
+
+
+
+if __name__ == "__main__":
+    value=-1
+    print("第一次使用MDC联系人请先写入联系人!!")
+    while value!=0 and value!=1:
+        value = int(input("写入(0)或读取(1)联系人:"))  # 获取用户输入的整数值
+
+        if value == 0:
+            time_set()
+            write_eeprom()
+        elif value == 1:
+            time_set()
+            read_eeprom()
+        else:
+            value = int(input("输入无效!\n输入(0/1)来(写入/读取)联系人:"))  # 获取用户输入的整数值
+    input("按 Enter 键退出程序")
+
+#    main()
+
+
+
+    # code =[0xAB,0xCD,0x6C,0x00,0x0B,0x69,0x7C,0xE6,0x5E,0x9F,0x6D,0x41,0xBF,0x61,0xA1,0x25,0x13,0x02,0xE8,0x80,0x16,0x93,0x15,0xE2,0xD1,0x91,0x0D,0x44,0x20,0x36,0xD5,0x41,0x13,0x03,0x24,0x80,0x16,0xA1,0xDB,0x29,0xD1,0x6E,0x0D,0x40,0xDE,0xCA,0x2A,0xBF,0x13,0x00,0xE1,0x80,0x16,0x6D,0x14,0xE6,0xD1,0x6E,0xF2,0xBF,0xDE,0xCA,0x2A,0xBF,0x12,0x03,0x16,0x7F,0xE9,0x93,0xEB,0x19,0x2E,0x91,0x0D,0x40,0xDE,0xCA,0x2A,0xBF,0x42,0x56,0xA8,0xCE,0x45,0x24,0x51,0xA8,0x69,0x91,0x0D,0x40,0x21,0x35,0xD5,0x40,0x46,0x55,0xC4,0xCB,0x23,0x6C,0x14,0xE6,0x2E,0x91,0x0D,0x40,0x21,0x35,0xD5,0x40,0x79,0x5A,0xDC,0xBA]
+    # # code=[0xAB, 0xCD, 0x1C, 0x00, 0x0B, 0x69, 0x0C, 0xE6, 0xCE, 0x80, 0x1D, 0x40, 0xBF, 0x61, 0xA1, 0x25, 0xEC, 0xFC, 0x16, 0x7F, 0xE9, 0x93, 0xEB, 0x19, 0xD1, 0x6E, 0xF2, 0xBF, 0xDE, 0xCA, 0x2A, 0xBF, 0xCF, 0x04, 0xDC, 0xBA]
+    # payload_decoded = convert_payload_to_hex(code)  # 跳过头部和尾部的校验信息
+    # hex_payload = ' '.join(['{:02X}'.format(byte) for byte in payload_decoded])
+    # print(hex_payload)
+