中文字库

.idea/workspace.xml

@@ -22,9 +22,12 @@
   <component name="ChangeListManager">
     <list default="true" id="cea36e80-e289-4d69-9030-7186d540ac0e" name="更改" comment="中英文字符对齐">
       <change beforePath="$PROJECT_DIR$/.idea/workspace.xml" beforeDir="false" afterPath="$PROJECT_DIR$/.idea/workspace.xml" afterDir="false" />
-      <change beforePath="$PROJECT_DIR$/app/app.c" beforeDir="false" afterPath="$PROJECT_DIR$/app/app.c" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/Makefile" beforeDir="false" afterPath="$PROJECT_DIR$/Makefile" afterDir="false" />
       <change beforePath="$PROJECT_DIR$/driver/bk4819.c" beforeDir="false" afterPath="$PROJECT_DIR$/driver/bk4819.c" afterDir="false" />
-      <change beforePath="$PROJECT_DIR$/ui/helper.c" beforeDir="false" afterPath="$PROJECT_DIR$/ui/helper.c" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/font.h" beforeDir="false" afterPath="$PROJECT_DIR$/font.h" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/main.c" beforeDir="false" afterPath="$PROJECT_DIR$/main.c" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/settings.c" beforeDir="false" afterPath="$PROJECT_DIR$/settings.c" afterDir="false" />
+      <change beforePath="$PROJECT_DIR$/uv-k5font/font_new/font.cpp" beforeDir="false" afterPath="$PROJECT_DIR$/uv-k5font/font_new/font.cpp" afterDir="false" />
     </list>
     <option name="SHOW_DIALOG" value="false" />
     <option name="HIGHLIGHT_CONFLICTS" value="true" />

Makefile

@@ -49,6 +49,8 @@ ENABLE_MDC1200                   ?= 1
 ENABLE_MDC1200_SHOW_OP_ARG    ?= 1
 ENABLE_MDC1200_SIDE_BEEP      ?= 0
 ENABLE_MDC1200_CONTACT        ?= 1
+ENABLE_CHINESE_FULL1          ?= 0
+ENABLE_CHINESE_FULL2          ?= 0
 
 
 # ---- DEBUGGING ----
@@ -262,6 +264,12 @@ endif
 ifeq ($(ENABLE_MDC1200_CONTACT),1)
     CFLAGS  += -DENABLE_MDC1200_CONTACT
 endif
+ifeq ($(ENABLE_CHINESE_FULL1),1)
+    CFLAGS  += -DENABLE_CHINESE_FULL1
+endif
+ifeq ($(ENABLE_CHINESE_FULL2),1)
+    CFLAGS  += -DENABLE_CHINESE_FULL2
+endif
 ifeq ($(ENABLE_MDC1200_SHOW_OP_ARG),1)
     CFLAGS  += -DENABLE_MDC1200_SHOW_OP_ARG
 endif

driver/eeprom.c

@@ -38,7 +38,6 @@ void EEPROM_ReadBuffer(uint16_t Address, void *pBuffer, uint8_t Size)
 
 	I2C_Stop();
 }
-
 void EEPROM_WriteBuffer(uint16_t Address, const void *pBuffer)
 {
     if (pBuffer == NULL || Address >= 0x2000)
@@ -60,3 +59,65 @@ void EEPROM_WriteBuffer(uint16_t Address, const void *pBuffer)
     // give the EEPROM time to burn the data in (apparently takes 5ms)
     SYSTEM_DelayMs(8);
 }
+
+#define AT24C1024_ADDRESS 0xA4
+#define AT24C1024_PAGE_SIZE 64
+
+void E1EPROM_ReadBuffer_1024(uint32_t Address, void *pBuffer, uint16_t Size) {
+    if (pBuffer == NULL || Address >= 0x20000) // Address limit for AT24C1024 (17-bit address)
+        return;
+
+    uint16_t bytesRead = 0;
+    uint8_t* dataPointer = (uint8_t*)pBuffer;
+
+    while (bytesRead < Size) {
+        uint16_t bytesToRead = (Size - bytesRead < AT24C1024_PAGE_SIZE) ? (Size - bytesRead) : AT24C1024_PAGE_SIZE;
+        uint16_t offset = Address % AT24C1024_PAGE_SIZE;
+
+        I2C_Start();
+        I2C_Write(AT24C1024_ADDRESS | ((Address >> 16) & 0x01)); // Sending device address and MSB of memory address
+        I2C_Write((uint8_t)(Address >> 8)); // Sending address high byte
+        I2C_Write((uint8_t)(Address & 0xFF)); // Sending address low byte
+        I2C_Start();
+        I2C_Write(AT24C1024_ADDRESS | 0x01); // Sending device address with read bit
+
+        uint8_t buffer[AT24C1024_PAGE_SIZE];
+        I2C_ReadBuffer(buffer, AT24C1024_PAGE_SIZE);
+
+        // Copy the relevant portion of the buffer to the output buffer
+        memcpy(dataPointer, buffer + offset, bytesToRead);
+
+        bytesRead += bytesToRead;
+        dataPointer += bytesToRead;
+        Address += bytesToRead;
+
+        I2C_Stop();
+    }
+}
+
+void E1EPROM_WriteBuffer_1024(uint32_t Address, const void *pBuffer, uint16_t Size) {
+    if (pBuffer == NULL || Address >= 0x20000) // Address limit for AT24C1024 (17-bit address)
+        return;
+
+    uint8_t buffer[AT24C1024_PAGE_SIZE];
+    uint32_t endAddress = Address + Size;
+    for (uint32_t addr = Address; addr < endAddress; addr += AT24C1024_PAGE_SIZE) {
+        uint16_t bytesToWrite = (endAddress - addr < AT24C1024_PAGE_SIZE) ? (endAddress - addr) : AT24C1024_PAGE_SIZE;
+        uint16_t offset = Address % AT24C1024_PAGE_SIZE;
+        uint16_t remaining = AT24C1024_PAGE_SIZE - offset;
+        bytesToWrite = (bytesToWrite < remaining) ? bytesToWrite : remaining;
+
+        EEPROM_ReadBuffer(addr - offset, buffer, AT24C1024_PAGE_SIZE);
+        if (memcmp(pBuffer, buffer + offset, bytesToWrite) != 0) {
+            I2C_Start();
+            I2C_Write(AT24C1024_ADDRESS | ((addr >> 16) & 0x01)); // Sending device address and MSB of memory address
+            I2C_Write((uint8_t)(addr >> 8)); // Sending address high byte
+            I2C_Write((uint8_t)(addr & 0xFF)); // Sending address low byte
+            I2C_WriteBuffer(pBuffer, bytesToWrite);
+            I2C_Stop();
+        }
+        pBuffer += bytesToWrite;
+        // give the EEPROM time to burn the data in (assuming 5ms per page write)
+        SYSTEM_DelayMs(5);
+    }
+}

driver/eeprom.h

@@ -21,6 +21,8 @@
 
 void EEPROM_ReadBuffer(uint16_t Address, void *pBuffer, uint8_t Size);
 void EEPROM_WriteBuffer(uint16_t Address, const void *pBuffer);
+void E1EPROM_ReadBuffer_1024(uint32_t Address, void *pBuffer, uint16_t Size) ;
+    void E1EPROM_WriteBuffer_1024(uint32_t Address, const void *pBuffer, uint16_t Size) ;
 
 #endif
 

font.h

@@ -29,6 +29,12 @@ extern const uint8_t gFontSmall[95 - 1][6];
 #ifdef ENABLE_SMALL_BOLD
 	extern const uint8_t gFontSmallBold[95 - 1][6];
 #endif
+#ifdef ENABLE_CHINESE_FULL1
+extern uint8_t  gFontChinese_out1[57742];
 
+#elifdef ENABLE_CHINESE_FULL2
+
+extern uint8_t gFontChinese_out2[57742];
+#endif
 #endif
 

main.c

@@ -81,7 +81,14 @@ void Main(void)
 #ifdef ENABLE_UART
     UART_Init();
 #endif
+    SETTINGS_InitEEPROM();
+#ifdef ENABLE_CHINESE_FULL1
+    SETTINGS_InitEEPROM();
 
+#elifdef ENABLE_CHINESE_FULL2
+    SETTINGS_InitEEPROM();
+
+#endif
 
 
 	memset(gDTMF_String, '-', sizeof(gDTMF_String));
@@ -205,6 +212,15 @@ void Main(void)
 //    for (int i =MDC_ADD[0]; i < MDC_ADD[0]+16; ++i) {
 //        EEPROM_WriteBuffer(i,&A[i-MDC_ADD[0]]);
 //    }
+    uint8_t B[64];
+    memset(B,'B',sizeof (B));
+    E1EPROM_WriteBuffer_1024(0x10000,B,64);
+    E1EPROM_ReadBuffer_1024(0x10000,B,64);
+    UART_Send(B,64);
+    while(1)
+    {
+
+    }
 	while (1)
 	{