mirror of
https://github.com/travisgoodspeed/goodwatch
synced 2024-11-21 07:40:55 +00:00
112 lines
4.7 KiB
Markdown
112 lines
4.7 KiB
Markdown
Howdy y'all,
|
|
|
|
This is a side project of mine to build a replacement circuit board
|
|
for the Casio 3208 module, used in the Casio CA-53W and CA-506
|
|
calculator watches. It is not compatible with the 3228 module used in
|
|
the Databank watches, which have four external buttons instead of two.
|
|
As a side project, it has no warranty whatsoever and you shouldn't use
|
|
it for anything.
|
|
|
|
In the rare case that you find this project to be useful, you owe me a
|
|
pint of good, hoppy pale ale. All license to use this project is
|
|
revoked if you try to pass off a pilsner instead.
|
|
|
|
In addition to the source code, there is handy documentation in the
|
|
[wiki](https://github.com/travisgoodspeed/goodwatch/wiki) and a
|
|
general interest website at [goodwatch.org](http://goodwatch.org/).
|
|
The wiki's
|
|
[DeveloperGuide](https://github.com/travisgoodspeed/goodwatch/wiki/DeveloperGuide)
|
|
page might be particularly handy.
|
|
|
|
73 from Knoxville,
|
|
|
|
--Travis
|
|
|
|
|
|
|
|
## Software Status
|
|
|
|
Our firmware is freely available in this repository, compiling with
|
|
the standard MSP430 compiler packages that ship with Debian. It
|
|
consists of a
|
|
[Clock](https://github.com/travisgoodspeed/goodwatch/wiki/ClockApplet),
|
|
a Stopwatch, an RPN Calculator, and a [Hex Memory
|
|
Viewer](https://github.com/travisgoodspeed/goodwatch/wiki/HexApplet)
|
|
with Disassembler, all written in C. It compiles in Debian with all
|
|
of the MSP430 packages installed.
|
|
|
|
On watches with a radio, we have
|
|
[Morse](https://github.com/travisgoodspeed/goodwatch/wiki/MorseApplet)
|
|
and GFSK transmitters, as well as an [OOK
|
|
transmitter](https://github.com/travisgoodspeed/goodwatch/wiki/OOK_Example)
|
|
that will command cheap remote-controlled relays. It has a [frequency
|
|
counter](https://github.com/travisgoodspeed/goodwatch/wiki/CounterApplet).
|
|
The radio is accessible from a host computer over the UART for
|
|
building base stations and repeaters, or for rapidly prototyping radio
|
|
applications in Python. P25 and DMR support might come soon.
|
|
|
|
Additionally, we've written our own client for the CC430's BootStrap
|
|
Loader (BSL). You might find it handy for other projects involving
|
|
that chip, or other MSP430F5 and MSP430F6 chips without USB. You will
|
|
need to be a member of the `dialout` group to flash the firmware.
|
|
|
|
## Hardware Status
|
|
|
|
Our replacement board is based around the CC430F6147, which combines
|
|
an MSP430 microcontroller with an LCD controller and a sub-GHz radio.
|
|
Thanks to pin compatibility, our fancy linker scripts produce a
|
|
firmware image that works just as well on the older CC430F6137
|
|
chip.
|
|
|
|
The
|
|
[GoodWatch30](https://github.com/travisgoodspeed/goodwatch/wiki/GoodWatch30)
|
|
is our current hardware revision, with filters that run from 300 MHz
|
|
to either 500MHz or 915MHz. The GoodWatch20 family had narrower
|
|
filters at 433MHz, but is still supported.
|
|
|
|
See `BOM.txt` in the hardware directories for a parts list, and the
|
|
wiki for an assembly guide.
|
|
|
|
|
|
## Related Projects
|
|
|
|
[Pluto](https://github.com/carrotIndustries/pluto) is a replacement
|
|
PCB for the Casio F-91W that is also based on an MSP430. We happily
|
|
use that project's [energy
|
|
monitor](https://github.com/carrotIndustries/energytrace-util)
|
|
utility for measuring our power budget.
|
|
|
|
[Elektronika-1](https://github.com/BenjaminSoelberg/elektronika-1) is
|
|
Benjamin Sølberg's replacement board for the Soviet Электроника-1
|
|
watch, based on an MSP430FR2433.
|
|
|
|
[Sensor Watch](https://github.com/joeycastillo/Sensor-Watch/) is Joey
|
|
Castillo's ATSAML22 replacement board for the Casio F-91W. He adds a
|
|
backlight, and a 9-pin flex PCB allows you to add a custom sensor to
|
|
the watch, rather than have one built into the board.
|
|
|
|
The [CharlieWatch](https://github.com/osresearch/charliewatch) from
|
|
Trammell Hudson is a nice little fork of the GoodWatch that uses a
|
|
charlieplexed array of LEDs instead of a Casio watchcase.
|
|
|
|
[iceSIO](https://github.com/icelord75/icesio) matches the same Casio
|
|
3208 casings as the GoodWatch, but uses a PIC16 platform with
|
|
accelerometer, compass and environmental sensors.
|
|
|
|
[FaradayRF](https://faradayrf.com/) is a CC430 radio board intended
|
|
for amateur use, with a 500mW amplifier and GPS receiver. Their radio
|
|
chain is far more carefully designed than ours, but in time, we hope
|
|
that the two projects will communicate with each other.
|
|
|
|
[openchronos-ng-elf](https://github.com/BenjaminSoelberg/openchronos-ng-elf)
|
|
seems to be the most recently maintained firmware for TI's OpenChronos
|
|
devkit, which uses the CC430F6137. See Adam Laurie's
|
|
[ChronIC](http://adamsblog.rfidiot.org/2013/03/you-can-ring-my-bell-adventures-in-sub.html)
|
|
project for an early example of sniffing OOK traffic and replaying it
|
|
from a watch.
|
|
|
|
[F91 Kepler](https://gitlab.com/_Pegor/kepler_fw) is an OLED and BTLE
|
|
replacement for the Casio F91W module. It uses a CC2640 and has some
|
|
rather good documentation.
|
|
|