Piotr Esden-Tempski 483ba0c896 Replaced all 0201 parts except the 0.1u for 0402. ... I did not change the 0.1u yet as we have 3 of them on the back side of the board. They are decoupling caps so they should be as close as possible to the power pins. So moving them to a spot that can accept a higher part might be difficult. Although we could use 0402 that are <0.33mm thick too. This would fit our budget and make assembly easier. Thus I will make the change in a separate commit.		2018-09-02 21:51:44 -07:00
..
goodwatch30.pretty	Added outline of the top side enclosure pocket to the board footprint.	2018-09-02 20:27:50 -07:00
BOM.txt	Updated BOM.	2018-08-18 14:10:44 -04:00
fp-lib-table	Fixes Kicad footprint library path in Kicad 5. #100	2018-08-02 11:11:36 -04:00
goodwatch30.dcm	Footprints for the new balun and filters. #40 #100	2018-08-02 12:14:19 -04:00
goodwatch30.kicad_pcb	Replaced all 0201 parts except the 0.1u for 0402.	2018-09-02 21:51:44 -07:00
goodwatch30.lib	Schematic symbols (no layout) for the GW30's new balun and filters. #100 #40	2018-08-02 10:55:41 -04:00
goodwatch30.pro	Kicad 5 project changes.	2018-08-02 16:04:52 -04:00
goodwatch30.sch	Replaced all 0201 parts except the 0.1u for 0402.	2018-09-02 21:51:44 -07:00
sym-lib-table	Initial draft of GW30 ported to Kicad 5. #99	2018-08-01 15:18:39 -04:00