This commit is a reinforcement of commit c1c99e9.
1. Replication information can be stored when the RDB file is
generated by a mater using server.slaveseldb when server.repl_backlog
is not NULL, or set repl_stream_db be -1. That's safe, because
NULL server.repl_backlog will trigger full synchronization,
then master will send SELECT command to replicaiton stream.
2. Only do rdbSave* when rsiptr is not NULL,
if we do rdbSave* without rdbSaveInfo, slave will miss repl-stream-db.
3. Save the replication informations also in the case of
SAVE command, FLUSHALL command and DEBUG reload.
This commit attempts to fix a number of bugs reported in #4316.
They are related to the way replication info like replication ID,
offsets, and currently selected DB in the master client, are stored
and loaded by Redis. In order to avoid inconsistencies the changes in
this commit try to enforce that:
1. Replication information are only stored when the RDB file is
generated by a slave that has a valid 'master' client, so that we can
always extract the currently selected DB.
2. When replication informations are persisted in the RDB file, all the
info for a successful PSYNC or nothing is persisted.
3. The RDB replication informations are only loaded if the instance is
configured as a slave, otherwise a master can start with IDs that relate
to a different history of the data set, and stil retain such IDs in the
future while receiving unrelated writes.
A slave may be started with an RDB file able to provide enough slave to
perform a successful partial SYNC with its master. However in such a
case, how outlined in issue #4268, the slave backlog will not be
started, since it was only initialized on full syncs attempts. This
creates different problems with successive PSYNC attempts that will
always result in full synchronizations.
Thanks to @fdingiit for discovering the issue.
when SHUTDOWN command is recived it is possible that some of the recent
command were not yet flushed from the AOF buffer, and the server
experiences data loss at shutdown.
Lua scripting does not support calling blocking commands, however all
the native Redis commands are flagged as "s" (no scripting flag), so
this is not possible at all. With modules there is no such mechanism in
order to flag a command as non callable by the Lua scripting engine,
moreover we cannot trust the modules users from complying all the times:
it is likely that modules will be released to have blocking commands
without such commands being flagged correctly, even if we provide a way to
signal this fact.
This commit attempts to address the problem in a short term way, by
detecting that a module is trying to block in the context of the Lua
scripting engine client, and preventing to do this. The module will
actually believe to block as usually, but what happens is that the Lua
script receives an error immediately, and the background call is ignored
by the Redis engine (if not for the cleanup callbacks, once it
unblocks).
Long term, the more likely solution, is to introduce a new call called
RedisModule_GetClientFlags(), so that a command can detect if the caller
is a Lua script, and return an error, or avoid blocking at all.
Being the blocking API experimental right now, more work is needed in
this regard in order to reach a level well blocking module commands and
all the other Redis subsystems interact peacefully.
Now the effect is like the following:
127.0.0.1:6379> eval "redis.call('hello.block',1,5000)" 0
(error) ERR Error running script (call to
f_b5ba35ff97bc1ef23debc4d6e9fd802da187ed53): @user_script:1: ERR
Blocking module command called from Lua script
This commit fixes issue #4127 in the short term.
This function failed when an internal-only flag was set as an only flag
in a node: the string was trimmed expecting a final comma before
exiting the function, causing a crash. See issue #4142.
Moreover generation of flags representation only needed at DEBUG log
level was always performed: a waste of CPU time. This is fixed as well
by this commit.
The function cache was not working at all, and the function returned
wrong values if there where two or more modules exporting native data
types.
See issue #4131 for more details.
In Redis 4.0 replication, with the introduction of PSYNC2, masters and
slaves replicate commands to cascading slaves and to the replication
backlog itself in a different way compared to the past.
Masters actually replicate the effects of client commands.
Slaves just propagate what they receive from masters.
This mechanism can cause problems when the configuration of an instance
is changed from master to slave inside a transaction. For instance
we could send to a master instance the following sequence:
MULTI
SLAVEOF 127.0.0.1 0
EXEC
SLAVEOF NO ONE
Before the fixes in this commit, the MULTI command used to be propagated
into the replication backlog, however after the SLAVEOF command the
instance is a slave, so the EXEC implementation failed to also propagate
the EXEC command. When the slaves of the above instance reconnected,
they were incrementally synchronized just sending a "MULTI". This put
the master client (in the slaves) into MULTI state, breaking the
replication.
Notably even Redis Sentinel uses the above approach in order to guarantee
that configuration changes are always performed together with rewrites
of the configuration and with clients disconnection. Sentiel does:
MULTI
SLAVEOF ...
CONFIG REWRITE
CLIENT KILL TYPE normal
EXEC
So this was a really problematic issue. However even with the fix in
this commit, that will add the final EXEC to the replication stream in
case the instance was switched from master to slave during the
transaction, the result would be to increment the slave replication
offset, so a successive reconnection with the new master, will not
permit a successful partial resynchronization: no way the new master can
provide us with the backlog needed, we incremented our offset to a value
that the new master cannot have.
However the EXEC implementation waits to emit the MULTI, so that if the
commands inside the transaction actually do not need to be replicated,
no commands propagation happens at all. From multi.c:
if (!must_propagate && !(c->cmd->flags & (CMD_READONLY|CMD_ADMIN))) {
execCommandPropagateMulti(c);
must_propagate = 1;
}
The above code is already modified by this commit you are reading.
Now also ADMIN commands do not trigger the emission of MULTI. It is actually
not clear why we do not just check for CMD_WRITE... Probably I wrote it this
way in order to make the code more reliable: better to over-emit MULTI
than not emitting it in time.
So this commit should indeed fix issue #3836 (verified), however it looks
like some reconsideration of this code path is needed in the long term.
BONUS POINT: The reverse bug.
Even in a read only slave "B", in a replication setup like:
A -> B -> C
There are commands without the READONLY nor the ADMIN flag, that are also
not flagged as WRITE commands. An example is just the PING command.
So if we send B the following sequence:
MULTI
PING
SLAVEOF NO ONE
EXEC
The result will be the reverse bug, where only EXEC is emitted, but not the
previous MULTI. However this apparently does not create problems in practice
but it is yet another acknowledge of the fact some work is needed here
in order to make this code path less surprising.
Note that there are many different approaches we could follow. For instance
MULTI/EXEC blocks containing administrative commands may be allowed ONLY
if all the commands are administrative ones, otherwise they could be
denined. When allowed, the commands could simply never be replicated at all.
In general we do not want before/after sleep() callbacks to be called
when we re-enter the event loop, since those calls are only designed in
order to perform operations every main iteration of the event loop, and
re-entering is often just a way to incrementally serve clietns with
error messages or other auxiliary operations. However, if we call the
callbacks, we are then forced to think at before/after sleep callbacks
as re-entrant, which is much harder without any good need.
However here there was also a clear bug: beforeSleep() was actually
never called when re-entering the event loop. But the new afterSleep()
callback was. This is broken and in this instance re-entering
afterSleep() caused a modules GIL dead lock.
Redis clients need to have an instantaneous idea of the amount of memory
they are consuming (if the number is not exact should at least be
proportional to the actual memory usage). We do that adding and
subtracting the SDS length when pushing / popping from the client->reply
list. However it is quite simple to add bugs in such a setup, by not
taking the objects in the list and the count in sync. For such reason,
Redis has an assertion to track counts near 2^64: those are always the
result of the counter wrapping around because we subtract more than we
add. This commit adds the symmetrical assertion: when the list is empty
since we sent everything, the reply_bytes count should be zero. Thanks
to the new assertion it should be simple to also detect the other
problem, where the count slowly increases because of over-counting.
The assertion adds a conditional in the code that sends the buffer to
the socket but should not create any measurable performance slowdown,
listLength() just accesses a structure field, and this code path is
totally dominated by write(2).
Related to #4100.
