We don't think we really care about optimizing for the empty DB case,
which should be uncommon. Adding branches hurts branch prediction.
Signed-off-by: Binbin <binloveplay1314@qq.com>
This commit addresses issues that were likely introduced during a rebase
related to:
b0f23df165
Change dual channel replication state in main handler only
Signed-off-by: naglera <anagler123@gmail.com>
A minor debugging change that helped in the investigation of
https://github.com/valkey-io/valkey/issues/1251. Basically there are
some edge cases where we want to fully isolate a note from receiving
packets, but can't suspend the process because we need it to continue
sending outbound traffic. So, added a filter for that.
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
The cluster-node-timeout is 3000 in our tests, the timing test wasn't
succeeding, so extending the wait_for made them much more reliable.
Signed-off-by: Binbin <binloveplay1314@qq.com>
All of the internal variables related to number of dicts in the kvstore
are type `int`. Not sure why these 2 items were declared as `long long`.
Signed-off-by: Jim Brunner <brunnerj@amazon.com>
RDMA MR (memory region) is not forkable, the VMA (virtual memory area)
of a MR gets empty in a child process. Prevent IO for child process to
avoid server crash.
In the check for whether read and write is allowed in an RDMA
connection, a check that if we're in a child process is added. If we
are, the function returns an error, which will cause the RDMA client to
be disconnected.
Suggested-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
The current implementation of `sdssplitargs` does repeated `sdscatlen`
to build the parsed arguments, which isn't very efficient because it
does a lot of extra reallocations and moves through the sds code a lot.
It also typically results in memory overhead, because `sdscatlen`
over-allocates, which is usually not needed since args are usually not
modified after being created.
The new implementation of sdssplitargs does two passes, the first to
parse the argument to figure out the final length and the second to
actually copy the string. It's generally about 2x faster for larger
strings (~100 bytes), and about 20% faster for small strings (~10
bytes). This is generally faster since as long as everything is in the
CPU cache, it's going to be fast.
There are a couple of sanity tests, none existed before, as well as some
fuzzying which was used to find some bugs and also to do the
benchmarking. The original benchmarking code can be seen
6576aeb86a.
```
test_sdssplitargs_benchmark - unit/test_sds.c:530] Using random seed: 1729883235
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 56.44%, new:13039us, old:29930us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 56.58%, new:12057us, old:27771us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 59.18%, new:9048us, old:22165us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 54.61%, new:12381us, old:27278us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 51.17%, new:16012us, old:32793us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 49.18%, new:16041us, old:31563us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 58.40%, new:12450us, old:29930us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 56.49%, new:13066us, old:30031us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 58.75%, new:12744us, old:30894us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 52.44%, new:16885us, old:35504us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 62.57%, new:8107us, old:21659us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 62.12%, new:8320us, old:21966us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 45.23%, new:13960us, old:25487us
[test_sdssplitargs_benchmark - unit/test_sds.c:577] Improvement: 57.95%, new:9188us, old:21849us
```
---------
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
to align with how we encode the length at `_addReplyLongLongWithPrefix`
Signed-off-by: Masahiro Ide <masahiro.ide@lycorp.co.jp>
Co-authored-by: Masahiro Ide <masahiro.ide@lycorp.co.jp>
Typically, RDMA connection gets closed by client side, the server side
handles diconnected CM event, and delete keepalive timer correctly.
However, the server side may close connection voluntarily, for example
the maxium connections exceed. Handle this case to avoid invalid memory
access.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
clusterNodeGetReplica agrumnets are missed to migrate during the slave
to replication migration so updated the argument slave to replica.
Signed-off-by: Shivshankar-Reddy <shiva.sheri.github@gmail.com>
At some point unit tests stopped building on MacOS because of duplicate
symbols. I had originally solved this problem by using a flag that
overrides symbols, but the much better solution is to mark the duplicate
symbols as weak and they can be overridden during linking. (Symbols by
default are strong, strong symbols override weak symbols)
I also added macos unit build to the CI, so that this doesn't silently
break in the future again.
---------
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Add config options for log format and timestamp format introduced by
#1022
Related to #1225
This change adds two new configs into valkey.conf:
log-format
log-timestamp-format
---------
Signed-off-by: azuredream <zhaozixuan67@gmail.com>
### Description
This patch try to increase the max number of io-threads from 16(128) to
256 for below reasons:
1. The core number increases a lot in the modern server processors, for
example, the [Sierra
Forest](https://en.wikipedia.org/wiki/Sierra_Forest) processors are
targeted towards with up to **288** cores.
Due to limitation of **_io-threads_** number (16 and 128 ), benchmark
like https://openbenchmarking.org/test/pts/valkey even cannot run on a
high core count server.
2. For some workloads, the bottleneck could be main thread, but for the
other workloads, big key/value which caused heavy io, the bottleneck
could be the io-threads, for example benchmark `memtier_benchmark -s
127.0.0.1 -p 9001 "--data-size" "20000" --ratio 1:0 --key-pattern P:P
--key-minimum=1 --key-maximum 1000000 --test-time 180 -c 50 -t 16
--hide-histogram`. The QPS is still scalable after 16 io-threads.
**Fig 1. QPS Scale factor with io-threads number grows.**
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
Co-authored-by: Wangyang Guo <wangyang.guo@intel.com>
In the old code, if fstat fails, replica->repldbfd will hold the
fd and we are doing a free client. And in freeClient, we check and
close only if repl_state == REPLICA_STATE_SEND_BULK. So if fstat
fails, we will leak the fd.
We can also extend freeClient to handle REPLICA_STATE_WAIT_BGSAVE_END
as well, but here seems to be a more friendly (and safer) way.
Signed-off-by: Binbin <binloveplay1314@qq.com>
When explored the cycles distribution for main thread with io-threads
enabled. We found this security attack check takes significant time in
main thread, **~3%** cycles were used to do the commands security check
in main thread.
This patch try to completely avoid doing it in the hot path. We can do
it only after we looked up the command and it wasn't found, just before
we call commandCheckExistence.
---------
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
Co-authored-by: Wangyang Guo <wangyang.guo@intel.com>
Add ability to configure log output format and timestamp format in the
logs.
This change adds two new configs:
* `log-format`: Either legacy or logfmt (See https://brandur.org/logfmt)
* `log-timestamp-format`: legacy, iso8601 or milliseconds (since the
eppch).
Related to #1006.
Example:
```
$ ./valkey-server /home/zhaoz12/git/valkey/valkey/valkey.conf
pid=109463 role=RDB/AOF timestamp="2024-09-10T20:37:25.738-04:00" level=warning message="WARNING Memory overcommit must be enabled! Without it, a background save or replication may fail under low memory condition. Being disabled, it can also cause failures without low memory condition, see https://github.com/jemalloc/jemalloc/issues/1328. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect."
pid=109463 role=RDB/AOF timestamp="2024-09-10T20:37:25.738-04:00" level=notice message="oO0OoO0OoO0Oo Valkey is starting oO0OoO0OoO0Oo"
pid=109463 role=RDB/AOF timestamp="2024-09-10T20:37:25.738-04:00" level=notice message="Valkey version=255.255.255, bits=64, commit=affbea5d, modified=1, pid=109463, just started"
pid=109463 role=RDB/AOF timestamp="2024-09-10T20:37:25.738-04:00" level=notice message="Configuration loaded"
pid=109463 role=master timestamp="2024-09-10T20:37:25.738-04:00" level=notice message="monotonic clock: POSIX clock_gettime"
pid=109463 role=master timestamp="2024-09-10T20:37:25.739-04:00" level=warning message="Failed to write PID file: Permission denied"
```
---------
Signed-off-by: azuredream <zhaozixuan67@gmail.com>
All other places written in this function are maintained it,
although the caller of rdbSaveDb does not reply on it, it is
maintained to be consistent with other places, is its duty.
Signed-off-by: Binbin <binloveplay1314@qq.com>
If a replica is step into data_age too old stage, it can not
trigger the failover and currently it can not be automatically
recovered and we will print a log every
CLUSTER_CANT_FAILOVER_RELOG_PERIOD,
which is every second. If the primary has not recovered or there is
no manual failover, this log will flood the log file.
In this case, limit its frequency to 10 times period, which is
10 seconds in our code. Also in this data_age too old stage,
the repeated logs also can stand for the progress of the failover.
See also #780 for more details about it.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Ping Xie <pingxie@outlook.com>
The command argument strings created while parsing inline commands (see
`processInlineBuffer()`) can contain free capacity. Since some commands
,such as `SET`, store these strings in the database, that free capacity
increases the memory usage. In the worst case, it could double the
memory usage.
This only occurs if the inline command format is used. The argument
strings are built by appending character by character in
`sdssplitargs()`. Regular RESP commands are not affected.
This change trims the strings within `processInlineBuffer()`.
### Why `trimStringObjectIfNeeded()` within `object.c` is not solving
this?
When the command argument string is packed into an object,
`trimStringObjectIfNeeded()` is called.
This does only trim the string if it is larger than
`PROTO_MBULK_BIG_ARG` (32kB), as only strings larger than this would
ever need trimming if the command it sent using the bulk string format.
We could modify this condition, but that would potentially have a
performance impact on commands using the bulk format. Since those make
up for the vast majority of executed commands, limiting this change to
inline commands seems prudent.
### Experiment Results
* 1 million `SET [key] [value]` commands
* Random keys (16 bytes)
* 600 bytes values
Memory usage without this change:
```
used_memory:1089327888
used_memory_human:1.01G
used_memory_rss:1131696128
used_memory_rss_human:1.05G
used_memory_peak:1089348264
used_memory_peak_human:1.01G
used_memory_peak_perc:100.00%
used_memory_overhead:49302800
used_memory_startup:911808
used_memory_dataset:1040025088
used_memory_dataset_perc:95.55%
```
Memory usage with this change:
```
used_memory:705327888
used_memory_human:672.65M
used_memory_rss:718802944
used_memory_rss_human:685.50M
used_memory_peak:705348256
used_memory_peak_human:672.67M
used_memory_peak_perc:100.00%
used_memory_overhead:49302800
used_memory_startup:911808
used_memory_dataset:656025088
used_memory_dataset_perc:93.13%
```
If the same experiment is repeated using the normal RESP array of bulk
string format (`*3\r\n$3\r\nSET\r\n...`) then the memory usage is 672MB
with and without of this change.
If a replica is attached, its memory usage is 672MB with and without
this change, since the replication link never uses inline commands.
Signed-off-by: Stefan Mueller <muelstef@amazon.com>
Currently, if the replica has a lot of data, CLUSTER RESET
will block for a while and report the slowlog, and it seems
that there is no harm in making it async so external components
can be easier when monitoring it.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Ping Xie <pingxie@outlook.com>
Part of https://github.com/valkey-io/valkey/pull/1200 PR, since feild is
changed. Looks like commands.def is missed to get genereated based on
the changes so that is causing CI failure on unstable.
Signed-off-by: Shivshankar-Reddy <shiva.sheri.github@gmail.com>
In some cases bgsave child process can run for a long time exhausting
system resources. Although it is possible to kill the bgsave child
process from the system shell, sometimes it is not possible allowing OS
level access.
This PR adds a new subcommand to the BGSAVE command.
When user will issue `BGSAVE CANCEL`, it will do one of the 2:
1. In case a bgsave child process is currently running, the child
process would be immediately killed thus terminating any
save/replication full sync process.
2. In case a bgsave child process is SCHEDULED to run, the scheduled
execution will be cancelled.
---------
Signed-off-by: ranshid <ranshid@amazon.com>
Signed-off-by: ranshid <88133677+ranshid@users.noreply.github.com>
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
struct connListener.priv should be used by connection type specific
data, static local listener data should not use this.
A RDMA config structure is going to be introduced in the next step:
```
typedef struct serverRdmaContextConfig {
char *bindaddr;
int bindaddr_count;
int port;
int rx_size;
int comp_vector;
...
} serverRdmaContextConfig;
```
Then a builtin RDMA will be supported.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This special pattern '#' is used to get the element itself,
it does not actually participate in the slot check.
In this case, passing `GET #` will cause '#' to participate
in the slot check, causing the command to get an
`pattern may be in different slots` error.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Hide 'unixsocketgroup' and 'unixsocketperm' into a Unix socket specific
data structure. A single opaque pointer 'void *priv' is enough for a
listener. Once any new config is added, we don't need 'void *priv2',
'void *priv3' and so on.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
When profiling some workloads with `io-threads` enabled. We found the
false sharing issue is heavy.
This patch try to split the the elements accessed by main thread and
io-threads into different cache line by padding the elements in the head
of `used_memory_thread_padded` array.
This design helps mitigate the false sharing between main
thread and io-threads, because the main thread has been the bottleneck
with io-threads enabled. We didn't put each element in an individual
cache line is that we don't want to bring the additional cache line
fetch operation (3 vs 16 cache line) when call function like
`zmalloc_used_memory()`.
---------
Signed-off-by: Lipeng Zhu <lipeng.zhu@intel.com>
Signed-off-by: Lipeng Zhu <zhu.lipeng@outlook.com>
Signed-off-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Wangyang Guo <wangyang.guo@intel.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
There is no limitation in Valkey to create a cluster with 1 or 2 primaries,
only that it cannot do automatic failover. Remove this restriction and
add `are you sure` prompt to prompt the user.
This allow we use it to create a test cluster by cli or by
create-cluster.
Signed-off-by: Binbin <binloveplay1314@qq.com>
https://github.com/valkey-io/valkey/issues/1145
First part of a two-step effort to add `WithSlot` API for expiry. This
PR is to fix a crash that occurs when a RANDOMKEY uses a different slot
than the cached slot of a client during a multi-exec.
The next part will be to utilize the new API as an optimization to
prevent duplicate work when calculating the slot for a key.
---------
Signed-off-by: Nadav Levanoni <nadavl@amazon.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Nadav Levanoni <nadavl@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
**Overview**
This PR introduces the use of
[MurmurHash3](https://en.wikipedia.org/wiki/MurmurHash) as the hashing
function for Lua's luaS_newlstr function, replacing the previous simple
hash function. The change aims to improve performance, particularly for
large strings.
**Changes**
Implemented MurmurHash3 algorithm in lstring.c
Updated luaS_newlstr to use MurmurHash3 for string hashing
**Performance Testing:**
Test Setup:
1. Ran a valkey server
2. Loaded 1000 keys with large values (100KB each) to the server using a
Lua script
```
local numKeys = 1000
for i = 1, numKeys do
local key = "large_key_" .. i
local largeValue = string.rep("x", 1024*100)
redis.call("SET", key, largeValue)
end
```
3. Used a Lua script to randomly select and retrieve keys
```
local randomKey = redis.call("RANDOMKEY")
local result = redis.call("GET", randomKey)
```
4. Benchmarked using valkey-benchmark:
`./valkey-benchmark -n 100000 evalsha
c157a37967e69569339a39a953c046fc2ecb4258 0`
Results:
A | Unstable | This PR | Change
-- | -- | -- | --
Throughput | 6,835.74 requests per second | 17,061.94 requests per
second | **+150% increase**
Avg Latency | 7.218 ms | 2.838 ms | **-61% decrease**
Min Latency | 3.144 ms | 1.320 ms | **-58% decrease**
P50 Latency | 8.463 ms | 3.167 ms | **-63% decrease**
P95 Latency | 8.863 ms | 3.527 ms | **-60% decrease**
P99 Latency | 9.063 ms | 3.663 ms | **-60% decrease**
Max Latency | 63.871 ms | 55.327 ms | **-13% decrease**
Summary:
* Throughput: Improved by 150%.
* Latency: Significant reductions in average, minimum, and percentile
latencies (P50, P95, P99), leading to much faster response times.
* Max Latency: Slightly decreased by 13%, indicating fewer outlier
delays after the fix.
---------
Signed-off-by: Shai Zarka <zarkash@amazon.com>
Signed-off-by: zarkash-aws <zarkash@amazon.com>
Signed-off-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
The client that was killed by FUNCTION KILL received a reply of
SCRIPT KILL and the server log also showed SCRIPT KILL.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Currently in conf we describe activerehashing as: Active rehashing
uses 1 millisecond every 100 milliseconds of CPU time. This is the
case for hz = 10.
If we change hz, the description in conf will be inaccurate. Users
may notice that the server spends some CPU (used in activerehashing)
at high hz but don't know why, since our cron calls are fixed to 1ms.
This PR takes hz into account and fixed the CPU usage at 1% (this may
not be accurate in some cases because we do 100 step rehashing in
dictRehashMicroseconds but it can avoid CPU spikes in this case).
This PR also improves the description of the activerehashing
configuration item to explain this change.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
The zcalloc symbol is a symbol name already used by zlib, which is
defining other names using the "z" prefix specific to zlib. In practice,
linking valkey with a static openssl, which itself might depend on a
static libz will result in link time error rejecting multiple symbol
definitions.
Fixes: #1157
Signed-off-by: Romain Geissler <romain.geissler@amadeus.com>
Currently in our daily, if a job fails, it will cancel the other jobs
in the same matrix, we want to avoid this so that all jobs in a matrix
can eventually run to completion.
Docs: jobs.<job_id>.strategy.fail-fast applies to the entire matrix.
If jobs.<job_id>.strategy.fail-fast is set to true or its expression
evaluates to true, GitHub will cancel all in-progress and queued jobs
in the matrix if any job in the matrix fails. This property defaults
to true.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Sometimes when dual-channel is turned off the tested replica might
disconnect on COB overrun. disable the replica COB limit in order to
prevent such cases.
Fixes: #1153
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
Signed-off-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
in case of valgrind run, the replica might get disconnected from the
primary due to repl-timeout reached. Fix is to configure larger timeout
in case of valgrind test.
**Partially** fixes: #1152
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
Ci report this failure:
```
*** [err]: SHUTDOWN NOSAVE can kill a timedout script anyway in tests/unit/scripting.tcl
Expected 'BUSY Valkey is busy running a script. *' to match '*connection refused*' (context: type eval line 8 cmd {assert_match {*connection refused*} $e} proc ::test)
```
We can see the logs the shutdown got rejected because there is an AOFRW
pending:
```
Writing initial AOF, can't exit.
Errors trying to shut down the server. Check the logs for more information.
```
The reason is that the previous test enabled the aof.
Signed-off-by: Binbin <binloveplay1314@qq.com>
Similar to #860 but this is for HGETALL families (HGETALL/HKEYS/HVALS).
This patch moves `prepareClientToWrite` out of the loop to reduce the
function overhead.
Signed-off-by: Masahiro Ide <imasahiro9@gmail.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
